2026 Latest TroytecDumps JN0-351 PDF Dumps and JN0-351 Exam Engine Free Share: https://drive.google.com/open?id=1XYmZ7XjU2c_dAVfuhoFeu98iHgBjVsbo
Do you often feel that your ability does not match your ambition？Are you dissatisfied with the ordinary and boring position? If your answer is yes, you can try to get the JN0-351 certification that you will find there are so many chances wait for you. You can get a better job; you can get more salary. But if you are trouble with the difficult of JN0-351 Exam, you can consider choose JN0-351 guide question to improve your knowledge to pass JN0-351 exam, which is your testimony of competence. We believe our latest JN0-351 exam torrent will be the best choice for you.
| Certification Vendor: | Juniper Networks |
|---|---|
| Exam Name: | Enterprise Routing and Switching, Specialist (JNCIS-ENT) Exam |
| Exam Number: | JN0-351 |
| Passing Score: | Not publicly disclosed (approx. 65%-70%) |
| Real Exam Qty: | 65 |
| Exam Format: | Multiple Choice |
| Certificate Validity Period: | 3 years |
| Available Languages: | English |
| Related Certifications: | JNCIP-ENT JNCIA-Junos JNCIE-ENT |
| Exam Duration: | 90 minutes |
| Exam Price: | $200 USD |
| Recommended Training: | Juniper Learning Portal |
| Exam Registration: | Pearson VUE Registration |
| Sample Questions: | Juniper JN0-351 Sample Questions |
| Exam Way: | Online proctored or onsite testing center (Pearson VUE) |
| Pre Condition: | Valid JNCIA-Junos certification |
| Official Syllabus URL: | https://www.juniper.net/us/en/training/certification/tracks/enterprise-routing-switching/jncis-ent.html |
Many students did not perform well before they use Enterprise Routing and Switching, Specialist (JNCIS-ENT) actual test. They did not like to study, and they disliked the feeling of being watched by the teacher. They even felt a headache when they read a book. There are also some students who studied hard, but their performance was always poor. Basically, these students have problems in their learning methods. JN0-351 prep torrent provides students with a new set of learning modes which free them from the rigid learning methods. You can be absolutely assured about the high quality of our products, because the content of Enterprise Routing and Switching, Specialist (JNCIS-ENT) actual test has not only been recognized by hundreds of industry experts, but also provides you with high-quality after-sales service.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
NEW QUESTION # 160
Exhibit.
Which router will become the OSPF BDR if all routers are powered on at the same time?
Answer: C
Explanation:
Explanation
OSPF DR/BDR election is a process that occurs on multi-access data links. It is intended to select two OSPF nodes: one to be acting as the Designated Router (DR), and another to be acting as the Backup Designated Router (BDR).The DR and BDR are responsible for generating network LSAs for the multi-access network and synchronizing the LSDB with other routers on the same network1.
The DR/BDR election is based on two criteria: the OSPF priority and the router ID. The OSPF priority is a value between 0 and 255 that can be configured on each interface participating in OSPF. The default priority is
1. A priority of 0 means that the router will not participate in the election and will never become a DR or BDR. The router with the highest priority will become the DR, and the router with the second highest priority will become the BDR. If there is a tie in priority, then the router ID is used as a tie-breaker. The router ID is a
32-bit number that uniquely identifies each router in an OSPF domain.It can be manually configured or automatically derived from the highest IP address on a loopback interface or any active interface2.
In this scenario, all routers have the same priority of 1, so the router ID will determine the outcome of the election. The router IDs are shown in the exhibit as RID values. The highest RID belongs to R4 (10.10.10.4), so R4 will become the DR. The second highest RID belongs to R3 (10.10.10.3), so R3 will become the BDR.
References:
1:OSPF DR/BDR Election: Process, Configuration, and Tuning2:OSPF Designated Router (DR) and Backup Designated Router (BDR)
NEW QUESTION # 161
Which statement is correct about the configuration shown in the exhibit?
Answer: A
NEW QUESTION # 162
An update to your organization's network security requirements document requires management traffic to be isolated in a non-default routing-instance. You want to implement this requirement on your Junos-based devices.
Which two commands enable this behavior? (Choose two.)
Answer: C,D
Explanation:
Explanation
To isolate management traffic in a non-default routing-instance on Junos-based devices, you can use the set system management-instance and set routing-instances mgmt_junos commands12.
set system management-instance: This command associates the management interface (usually named fxp0 or em0 for Junos OS, or re0:mgmt-* or re1:mgmt-* for Junos OS Evolved) with the non-default virtual routing and forwarding (VRF) instance1. After you configure the non-default management VRF instance, management traffic no longer has to share a routing table with other control traffic or protocol traffic1.
set routing-instances mgmt_junos: This command creates a new routing instance named mgmt_junos. The name of the dedicated management VRF instance is reserved and hardcoded as mgmt_junos; you cannot configure any other routing instance by the name mgmt_junos1.
Therefore, options C and D are correct. Options A and B are not correct because they attempt to assign an interface to the mgmt_junos routing instance, which is not necessary for isolating management traffic1.
NEW QUESTION # 163
You are receiving multiple BGP routes from an upstream neighbor and only want to advertise a single summarized prefix to your internal OSPF neighbors. This route should only be advertised when you are receiving these BGP routes from this neighbor.
In this scenario, which type of route should you create?
Answer: B
Explanation:
Explanation
In this scenario, you should create an 1. Aggregate routes are used for advertising summarized network prefixes1. They help minimize the number of routing tables in an IP network by consolidating selected multiple routes into a single route advertisement1. This approach is in contrast to non-aggregation routing, in which every routing table contains a unique entry for each route1.
Therefore, option A is correct. Options B, C, and D are not correct because:
Static route using the resolve feature: This type of route uses the resolve feature to install a static route in the routing table only if a specific condition is met1. However, it does not provide the capability to summarize multiple routes into a single prefix.
Generate route: This type of route generates a route that is always present in the routing table and can be used to summarize routes. However, it does not have the capability to only advertise the route when specific BGP routes are being received from a neighbor1.
Static route using qualified next hops: This type of route allows for the specification of multiple next-hop addresses for a static route1. However, it does not provide the capability to summarize multiple routes into a single prefix.
NEW QUESTION # 164
Which two statements are correct about Q-in-Q tunneling on Juniper EX Series switches?
(Choose two.)
Answer: B,C
Explanation:
Q-in-Q (IEEE 802.1ad-style tunneling) works by adding a second, outer 802.1Q VLAN tag to already VLAN-tagged customer traffic, allowing a service provider to transparently transport multiple customer VLANs across their network using a single outer VLAN tag per customer, without needing visibility into or interference with the customer's inner VLAN tags.
NEW QUESTION # 165
......
JN0-351 Latest Dumps Sheet: https://www.troytecdumps.com/JN0-351-troytec-exam-dumps.html
BONUS!!! Download part of TroytecDumps JN0-351 dumps for free: https://drive.google.com/open?id=1XYmZ7XjU2c_dAVfuhoFeu98iHgBjVsbo