BONUS!!! Download part of Lead2Passed FCSS_NST_SE-7.6 dumps for free: https://drive.google.com/open?id=10KWenSSo-sJg7tMehd5pscvOuu2Ee07G
The Lead2Passed guarantees their customers that if they have prepared with FCSS - Network Security 7.6 Support Engineer (FCSS_NST_SE-7.6) practice test, they can pass the FCSS - Network Security 7.6 Support Engineer (FCSS_NST_SE-7.6) certification easily. If the applicants fail to do it, they can claim their payment back according to the terms and conditions. Many candidates have prepared from the actual Fortinet FCSS_NST_SE-7.6 Practice Questions and rated them as the best to study for the examination and pass it in a single try with the best score. The Fortinet FCSS_NST_SE-7.6 practice material of Lead2Passed came into existence after consultation with many professionals and getting their positive reviews.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
>> Reliable FCSS_NST_SE-7.6 Test Tutorial <<
There is no doubt that it is very difficult for most people to pass the exam and have the certification easily. If you are also weighted with the trouble about a FCSS_NST_SE-7.6 certification, we are willing to soothe your trouble and comfort you. We have compiled the FCSS_NST_SE-7.6 test guide for these candidates who are trouble in this exam, in order help they pass it easily, and we deeply believe that our FCSS_NST_SE-7.6 Exam Questions can help you solve your problem. Believe it or not, if you buy our study materials and take it seriously consideration, we can promise that you will easily get the certification that you have always dreamed of. We believe that you will never regret to buy and practice our FCSS_NST_SE-7.6 latest question.
NEW QUESTION # 133
Which exchange lakes care of DoS protection in IKEv2?
Answer: C
NEW QUESTION # 134
Refer to the exhibit.
A network topology and a partial routing table are shown.
FortiGate has already been configured with a firewall policy that allows all ICMP traffic to flow from port1 to port3.
Which two changes can the administrator perform to ensure the server at 10.4.0.1/24 receives the ICMP echo reply from the laptop at 10.1.0.1/24? (Choose two.)
Answer: A,B
Explanation:
The correct answers are A and C .
The study guide describes this exact asymmetric ICMP scenario. It states:
"The server sends an echo request to the PC through port2 of the local router, effectively bypassing FortiGate. When it receives the echo request, the PC responds with an echo reply through its default gateway, 10.1.0.2, which is port1 on FortiGate. Because there is no existing session, the echo reply is dropped. All subsequent echo replies are blocked." That means the current problem exists because:
* the ICMP request bypasses FortiGate
* the ICMP reply goes through FortiGate
* FortiGate has no matching session , so it drops the reply
The study guide then shows the exact corrective option:
"Allowing asymmetric routing:"
config system settings
set asymroute enable
end
It further explains:
"After the packet passes through the FortiGate CPU, FortiGate forwards the packet using the FIB, even though there are no session matches. FortiGate forwards all subsequent echo replies using the FIB." So A is correct.
The other valid fix is to make the traffic symmetric by changing the laptop's default gateway so the reply no longer goes through FortiGate. In the exhibit, the alternate gateway is 10.1.0.254 , which is the local router on the same subnet. If the laptop uses 10.1.0.254 instead of 10.1.0.2, the ICMP echo reply follows the same bypass path as the echo request, so the server receives it without involving FortiGate session validation. This makes C correct.
Why the other options are wrong:
* B is wrong because this is not an RPF problem. The study guide explains RPF as a reverse path lookup used to validate whether a packet arrived on a legitimate interface, mainly for spoofing protection. The issue in this scenario is a missing session due to asymmetric routing , not a strict-versus-feasible RPF failure
* D is wrong because FortiGate already has the specific route 10.4.0.0/24 through port3 in the routing table shown in the exhibit, so adding a default static route to port3 is unnecessary and not the reason the echo reply is being dropped So the verified answers are: A, C .
NEW QUESTION # 135
An administrator wants to capture encrypted phase 2 traffic between two FotiGate devices using the built-in sniffer.
If the administrator knows that there Is no NAT device located between both FortiGate devices, which command should the administrator run?
Answer: B
Explanation:
To capture encrypted IPsec phase 2 (ESP) traffic between two FortiGate devices, the correct protocol filter to use is ip proto 50. According to the Fortinet official sniffing and debugging documentation, ESP (Encapsulating Security Payload) is used for encrypted phase 2 payload transfer and always uses IP protocol number 50. Running the command diagnose sniffer packet any 'ip proto 50' captures only ESP packets, which represent the encrypted traffic-whether originating or transiting the device.
If there is no NAT device between FortiGates, ESP is not encapsulated in UDP (thus not on UDP port 4500; if NAT-T were required, packets would be UDP-encapsulated, but the scenario explicitly says NAT is not in use). UDP port 500 is for IKE control (negotiation) traffic, and AH (Authentication Header, ip proto 51) is not used for encryption in standard IPsec phase 2 with ESP.
This matches the official CLI reference from Fortinet for VPN and traffic analysis.
**
References:
FortiOS CLI Reference: diagnose sniffer packet, ESP, IP Protocol Numbers FortiGate VPN Administration Guide: Traffic Capture and Analysis of IPsec Traffic
NEW QUESTION # 136
Refer to the exhibit.
Partial output of the get vpn ipsec tunnel details command is shown. Based on the output, which two statements are correct? (Choose two.)
Answer: A,C
Explanation:
The correct answers are C and D.
The study guide's get vpn ipsec tunnel details example shows:
replay: enabled
inbound and outbound sections with separate SPIs
NPU acceleration: encryption(outbound) decryption(inbound)
and it labels these as "Phase 2 SAs for each direction" and "Hardware acceleration" This directly proves D. Anti-replay is enabled, because the output explicitly says replay: enabled For the NPU status, the study guide explains the exact npu_flag meanings:
npu_flag=00 = both IPsec SAs loaded to the kernel
npu_flag=01 = outbound IPsec SA copied to NPU
npu_flag=02 = inbound IPsec SA copied to NPU
npu_flag=03 = both outbound and inbound IPsec SAs copied to NPU
Because the exhibit shows hardware acceleration in both directions - encryption(outbound) and decryption(inbound) - the matching npu_flag is 03, not 02. That makes C correct and A incorrect.
Why B is wrong:
The same study guide output labels the tunnel as having Phase 2 SAs for each direction, so different inbound and outbound SPIs are normal for the two SAs. Also, the FortiOS administration guide explains that auto-negotiate controls whether phase 2 SA negotiation is initiated automatically, not whether inbound and outbound SPIs are different: "By default the phase 2 security association (SA) is not negotiated until a peer attempts to send data... Auto-negotiate initiates the phase 2 SA negotiation automatically..." So the verified answers are: C, D.
NEW QUESTION # 137
Refer to the exhibits.
An administrator is attempting to advertise the network configured on port3. However, FGT-A is not receiving the prefix.
Which two actions can the administrator take to fix this problem? (Choose two.)
Answer: B,C
NEW QUESTION # 138
......
You will receive a registration code and download instructions via email. We will be happy to assist you with any questions regarding our products. Our FCSS - Network Security 7.6 Support Engineer (FCSS_NST_SE-7.6) practice exam software helps to prepare applicants to practice time management, problem-solving, and all other tasks on the standardized exam and lets them check their scores. The FCSS - Network Security 7.6 Support Engineer (FCSS_NST_SE-7.6) practice test results help students to evaluate their performance and determine their readiness without difficulty.
Best FCSS_NST_SE-7.6 Practice: https://www.lead2passed.com/Fortinet/FCSS_NST_SE-7.6-practice-exam-dumps.html
DOWNLOAD the newest Lead2Passed FCSS_NST_SE-7.6 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=10KWenSSo-sJg7tMehd5pscvOuu2Ee07G