BONUS!!! Download part of Exam4Free 100-150 dumps for free: https://drive.google.com/open?id=1iAmKT9Fy2qnizdxMBet_BFnR7DtHuO0y
By doing this you can stay competitive and updated in the market. There are other several Cisco Certified Support Technician (CCST) Networking (100-150) certification exam benefits that you can gain after passing the Cisco Certified Support Technician (CCST) Networking (100-150) exam. Are you ready to add the 100-150 certification to your resume? Looking for the proven, easiest and quick way to pass the 100-150 Exam? If you are then you do not need to go anywhere. Just download the 100-150 Questions and start Cisco Certified Support Technician (CCST) Networking (100-150) exam preparation today.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
Instant answer feedback allows you to identify your vulnerabilities in a timely manner, so as to make up for your weaknesses. With our 100-150 practice quiz, you will find that the preparation process is not only relaxed and joyful, but also greatly improves the probability of passing the 100-150 Exam. And our pass rate of the 100-150 training materials is high as 98% to 100%. You are bound to pass the exam if you buy our 100-150 learning guide.
NEW QUESTION # 51
Which standard contains the specifications for Wi-Fi networks?
Answer: B
Explanation:
IEEE 802.11 is the standard that defines the protocols and specifications for wireless local area (Wi-Fi) networking.
NEW QUESTION # 52
A user reports that a company website is not available. The help desk technician issues a tracert command to determine if the server hosting the website is reachable over the network.
The output of the command is shown as follows:
What can you tell from the command output?
Answer: A
Explanation:
The tracert command output shows the path taken to reach the destination IP address, 192.168.1.10.
The command output indicates:
* Hops 1 and 2 are successfully reached.
* Hop 3 times out, meaning the router at hop 3 did not respond to the tracert request.
However, this does not necessarily indicate a problem with forwarding packets, as some routers may be configured to block or not respond to ICMP requests.
* Hops 4 and 5 are successfully reached, with hop 5 being the destination IP 192.168.1.10, indicating that the server is reachable.
Thus, the correct answer is C. The server with the address 192.168.1.10 is reachable over the network.
Reference: =
* Cisco Traceroute Command
* Understanding Traceroute
The tracert command output indicates that the server with the address 192.168.1.10 is reachable over the network. The asterisk (*) at hop 3 suggests that the probe sent to that hop did not return a response, which could be due to a variety of reasons such as a firewall blocking ICMP packets or the router at that hop being configured not to respond to ICMP requests. However, since the subsequent hops (4 and 5) are showing response times, it means that the packets are indeed getting through and the server is reachable12.
Reference: =
* How to Use Traceroute Command to Read Its Results
* How to Use the Tracert Command in Windows
NEW QUESTION # 53
A Cisco PoE switch is shown in the following image. Which type of port will provide both data connectivity and power to an IP phone?
Answer: A
Explanation:
The numbered-6 RJ-45 switch ports are PoE-enabled, carrying both data and power over the same Ethernet connection to an IP phone.
NEW QUESTION # 54
An engineer configured a new VLAN named VLAN2 for the Data Center team. When the team tries to ping addresses outside VLAN2 from a computer in VLAN2, they are unable to reach them.
What should the engineer configure?
Answer: D
Explanation:
When devices within a VLAN are unable to reach addresses outside their VLAN, it typically indicates that they do not have a configured path to external networks. The engineer should configure a default gateway for VLAN2. The default gateway is the IP address of the router's interface that is connected to the VLAN, which will route traffic from the VLAN to other networks12.
Reference: =
* Understanding and Configuring VLAN Routing and Bridging on a Router Using the IRB Feature
* VLAN 2 not able to ping gateway - Cisco Community
* VLANs: Virtual Local Area Networks (VLANs) logically segment network traffic to improve security and performance. Devices within the same VLAN can communicate directly.
* Default Gateway: For devices in VLAN2 to communicate with devices outside their VLAN, they need a default gateway configured. The default gateway is typically a router or Layer 3 switch that routes traffic between different VLANs and subnets.
* Additional VLAN: Not needed in this scenario as the issue is related to routing traffic outside VLAN2, not creating another VLAN.
* Default Route: While a default route on the router may be necessary, the primary issue for devices within VLAN2 is to have a configured default gateway.
* Static Route: This is used on routers to manually specify routes to specific networks but does not address the need for a default gateway on the client devices.
Reference:
* Cisco VLAN Configuration Guide: Cisco VLAN Configuration
* Understanding and Configuring VLANs: VLANs Guide
NEW QUESTION # 55
A user reports that a company website is not available. The help desk technician issues a tracert command to determine if the server hosting the website is reachable over the network. The output of the command is shown as follows:
What can you tell from the command output?
Answer: A
Explanation:
The tracert command output shows the path taken to reach the destination IP address, 192.168.1.10. The command output indicates:
*Hops 1 and 2 are successfully reached.
*Hop 3 times out, meaning the router at hop 3 did not respond to the tracert request. However, this does not necessarily indicate a problem with forwarding packets, as some routers may be configured to block or not respond to ICMP requests.
*Hops 4 and 5 are successfully reached, with hop 5 being the destination IP 192.168.1.10, indicating that the server is reachable.
Thus, the correct answer is C. The server with the address 192.168.1.10 is reachable over the network.
References :=
*Cisco Traceroute Command
*Understanding Traceroute
The tracert command output indicates that the server with the address 192.168.1.10 is reachable over the network. The asterisk (*) at hop 3 suggests that the probe sent to that hop did not return a response, which could be due to a variety of reasons such as a firewall blocking ICMP packets or the router at that hop being configured not to respond to ICMP requests. However, since the subsequent hops (4 and 5) are showing response times, it means that the packets are indeed getting through and the server is reachable12.
References :=
*How to Use Traceroute Command to Read Its Results
*How to Use the Tracert Command in Windows
NEW QUESTION # 56
......
Our company is your ally in achieving your targeted certification, providing you easy and interactive 100-150 exam braindumps. You can totally count on us as we are good at help you get the success on your coming exam. We will always stand by your on your way for the certification as we work as 24/7 online. If you have any question, you can find help from us on the 100-150 Study Guide. And our 100-150 learning questions are well-written to be understood by the customers all over the world.
Examcollection 100-150 Dumps Torrent: https://www.exam4free.com/100-150-valid-dumps.html
DOWNLOAD the newest Exam4Free 100-150 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1iAmKT9Fy2qnizdxMBet_BFnR7DtHuO0y