BTW, DOWNLOAD part of PassTorrent VNX301 dumps from Cloud Storage: https://drive.google.com/open?id=1iI2HO_rzNGudCqhtGYRYU_gpLP590c1O
Practicing for an Versa Certified SD-WAN Specialist (VNX300) (VNX301) exam is one of the best ways to ensure success. It helps students become familiar with the format of the actual VNX301 practice test. It also helps to identify areas where more focus and attention are needed. Furthermore, it can help reduce the anxiety and stress associated with taking an Versa Certified SD-WAN Specialist (VNX300) (VNX301) exam as it allows students to gain confidence in their knowledge and skills.
| Certification Vendor: | Versa Networks |
|---|---|
| Exam Name: | Versa Certified Administrator - SD-WAN Specialist (VNX301) |
| Exam Number: | VNX301 |
| Exam Format: | Scenario-based questions, Multiple-choice |
| Related Certifications: | Versa Certified SD-WAN Associate (VNX100) |
| Real Exam Qty: | Approx. 47 |
| Available Languages: | English |
| Recommended Training: | Versa Advanced Services (V-ASERV) Versa SD-WAN Configuration and Administration (V-SDCA) |
| Exam Registration: | Versa Certification Official Page |
| Sample Questions: | Versa Networks VNX301 Sample Questions |
| Exam Way: | Online proctored or authorized testing center |
| Pre Condition: | Recommended: Versa Certified SD-WAN Associate (VNX100) or equivalent SD-WAN experience |
| Official Syllabus URL: | https://academy.versa-networks.com/certification-vnx300/ |
>> Valid VNX301 Exam Online <<
Both practice tests simulate the Versa Networks VNX301 real exam environment and produce results of your attempts on the spot. In this way, you will be able to not only evaluate your progress but also overcome mistakes before the VNX301 actual examination. Windows computers support the Versa Certified SD-WAN Specialist (VNX300) VNX301 desktop practice exam software. The Versa Certified SD-WAN Specialist (VNX300) VNX301 web-based practice test needs an active internet connection.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 39
A branch user reports poor throughput over an SD-WAN tunnel. The command show interfaces detail vni-0/0 shows the interface is operating at half-duplex / 100 Mbps , although the circuit is expected to run at 1 Gbps full duplex. What is the most likely cause?
Answer: B
NEW QUESTION # 40
Examine the exhibit below.
Spoke1 and Spoke2 are part of Spoke-to-Hub-Only spoke group, the hub is advertising a default route to both the spokes.
Referring to the exhibit, which statement is true?
Answer: A
Explanation:
In Versa SD-WAN, a Spoke-to-Hub-Only topology is specifically designed for deployments where spoke branches communicate only with hub resources and not with other spokes. Versa's SD-WAN design documentation states that in a spoke-to-hub-only topology, the default behavior is that only hub routes are advertised, and spoke routes are not re-advertised by the hub branch. It also explains that this topology is used when spokes do not have to communicate with each other.
Even though the hub in the exhibit advertises a default route, that does not change the topology behavior into spoke-to-spoke communication. The default route can attract unknown traffic from the spokes toward the hub, but the Spoke-to-Hub-Only policy prevents the spoke prefixes from being redistributed or imported in a way that allows spoke-to-spoke reachability. Versa documentation further shows that spoke routes are filtered using BGP communities and import policies, and that the spoke route table contains only destinations behind the hubs, not other spoke routes.
NEW QUESTION # 41
Examine the exhibit below.
You are onboarding the SOLDEU-R2 branch device using the staging script. You cannot get a Versa- Provider-Controller-VR IP address assigned, indicating that the IPsec tunnel to the corrector has not come up.
You verified that the cables have been connected to the correct ports.
What has caused this issue?
Answer: C
Explanation:
The issue is caused by specifying the incorrect WAN port in the staging script. In the exhibit, the SOLDEU- R2 branch is physically connected to the Internet cloud through vni-0/0 , while vni-0/1 is shown as the inter- device link toward SOLDEU-R1. However, the show interfaces brief output shows that the WAN IP address
192.168.122.121/24 has been assigned to vni-0/1.0 , not to the Internet-facing interface. Since the cables are confirmed to be connected correctly, the mismatch must be in the staging script interface selection, not in the cabling.
Versa documentation states that during SD-WAN staging, the branch establishes an IKE session with the Controller, and after that the Controller assigns an IP address to the branch device. Versa troubleshooting guidance also states that after transport connectivity to the Controller is established, the branch forms IKE-based IPsec connectivity, and if this succeeds, the ptvi interface toward the Controller comes up. If IKE/IPsec fails, the ptvi interface remains down. Because the staged WAN IP is placed on the wrong VNI interface, the branch cannot reach the Controller over the intended Internet transport, so the Controller tunnel does not come up.
NEW QUESTION # 42
What are three roles that VOS performs? (Choose three.)
Answer: A,C,D
Explanation:
The correct answers are A, B, and E . Versa Operating System, or VOS , is the software platform used for Versa SD-WAN branch and headend functions. Versa troubleshooting documentation explicitly refers to common runtime state across SD-WAN Controller, branch, and hub devices , confirming that VOS is used for Controller and branch-style SD-WAN roles. Versa monitoring documentation also lists SD-WAN branches, SD-WAN Controller nodes, SD-WAN hubs, vCPEs, and uCPEs as assets that are monitored and managed in Versa Director, which aligns with VOS being used as a branch/edge and controller platform.
VOS can also act as a uCPE platform . Versa documentation includes procedures to configure uCPE on a VOS device, showing that VOS can host or support uCPE deployment use cases.
The originally provided answer A, C, D is not correct. A Log Collector or log forwarder function belongs to the Versa Analytics architecture, not the VOS branch role; Versa's design guide states that the log forwarder is part of the Versa Analytics node or can run as a standalone log-forwarder server.
A Zookeeper arbiter is also not a standard VOS SD-WAN device role in this context.
NEW QUESTION # 43
A VOS branch has two WAN circuits. You suspect the configured transport domain mapping is wrong because one link is not building the expected SD-WAN path. Which VSM control-plane command is most useful to check local WAN circuit information, transport domains, NAT status, and local tunnel-site details?
Answer: D
Explanation:
The correct answer is A . Versa SD-WAN data-path troubleshooting documentation instructs administrators to connect to the VSM control plane with vsh connect vsmd and then use show vsm p2mp local-tunnel-sites 0 to check the status of local site objects. The example output includes the local site key, neighbor IP, site type, site name, branch ID, tenant ID, and detailed WAN link information. It also shows fields such as WAN local VRF ID, WAN local link name, circuit information, link ID, behind-NAT status, shaping rate, public and private addresses, link flags, transport domain, and SLA interval.
This command is therefore highly relevant when validating whether the local SD-WAN site has learned and built the correct WAN transport objects for overlay tunnel creation. If a circuit is mapped to the wrong transport domain or has incorrect NAT/public/private address state, the local-tunnel-site output is one of the best places to confirm it.
The other commands are useful for software version, CGNAT summary, or CPU usage, but they do not show the detailed SD-WAN local tunnel-site transport mapping.
NEW QUESTION # 44
......
VNX301 Online Tests: https://www.passtorrent.com/VNX301-latest-torrent.html
BTW, DOWNLOAD part of PassTorrent VNX301 dumps from Cloud Storage: https://drive.google.com/open?id=1iI2HO_rzNGudCqhtGYRYU_gpLP590c1O