To pass the Fortinet NSE 7 - Secure Networking 7.6 Architect (NSE7_FSN_AR-7.6) certification exam you need to prepare well with the help of top-notch NSE7_FSN_AR-7.6 exam questions which you can download from Prep4away platform. On this platform, you will get valid, updated, and real Prep4away NSE7_FSN_AR-7.6 Dumps for quick exam preparation.
| Section | Objectives |
|---|---|
| Topic 1: SD-WAN | - Application steering - Overlay VPN - Performance SLA - Deployment and troubleshooting - SD-WAN architecture - SD-WAN routing |
| Topic 2: Enterprise Firewall | - High availability - Advanced firewall deployment - Security Fabric integration - Authentication and identity - VPN technologies - Centralized management and analytics - Troubleshooting - Routing and advanced networking |
>> New NSE7_FSN_AR-7.6 Exam Discount <<
With the help of performance reports of Fortinet NSE 7 - Secure Networking 7.6 Architect (NSE7_FSN_AR-7.6) Desktop practice exam software, you can gauge and improve your growth. You can also alter the duration and Fortinet NSE 7 - Secure Networking 7.6 Architect (NSE7_FSN_AR-7.6) questions numbers in your practice tests. Questions of this Fortinet NSE 7 - Secure Networking 7.6 Architect (NSE7_FSN_AR-7.6) mock test closely resemble the format of the actual test. As a result, it gives you a feeling of taking the actual test.
NEW QUESTION # 119
Refer to the exhibit.
An IPsec VPN tunnel using IKEv2 was brought up successfully, but when the tunnel rekey takes place the tunnel goes down.
The debug command for IKE was enabled and, in the exhibit, you can review the partial output of the debug IKE while attempting to bring the tunnel up.
What is causing. The tunnel to be down?
Answer: D
Explanation:
To determine the cause of the failure, we must analyze the IKEv2 debug output provided in the exhibit (image_ad3dc6.jpg):
Identify the Negotiation Phase:
The debug log shows: responder received CREATE_CHILD exchange.
In IKEv2, the CREATE_CHILD_SA exchange is used to create new Child SAs (Phase 2) or to rekey existing ones.
The fact that the tunnel was previously " brought up successfully " implies the initial IKE SA (Phase 1) is stable, and this error is occurring specifically during a rekey event, which often involves Perfect Forward Secrecy (PFS).
Analyze the Proposals (The Mismatch):
Incoming Proposal (Remote Peer):
The remote peer sends a proposal containing two Diffie-Hellman groups: type=DH_GROUP, val=MODP2048 (Group 14) and type=DH_GROUP, val=MODP1536 (Group 5).
My Proposal (Local FortiGate):
The local FortiGate configuration expects: type=DH_GROUP, val=MODP3072 (Group 15).
Result of the Negotiation:
The debug output concludes with: no proposal chosen and Negotiate SA Error.
This error occurs because the local FortiGate cannot find a common Diffie-Hellman group between what it requires (Group 15) and what the peer is offering (Groups 14 or 5).
While this is technically a mismatch occurring during the Phase 2 (Child SA) creation, " A Diffie-Hellman mismatch " (Option A) is the precise root cause identified in the logs.
Why other options are incorrect:
B: The log shows received create-child request, confirming that UDP traffic is reaching the device and is not blocked.
C: The failure is in the CREATE_CHILD exchange (Phase 2/Rekey), not the IKE_SA_INIT or IKE_AUTH (Phase 1) exchanges.
D: While the mismatch is occurring within the Phase 2 definitions, Option A is the specific technical reason for the no proposal chosen error shown in the DH_GROUP lines.
Reference:
FortiGate Security 7.6 Study Guide (IPsec VPN): " Phase 2 parameters... if Perfect Forward Secrecy (PFS) is enabled, a Diffie-Hellman exchange is performed again. Both peers must match the DH Group. "
NEW QUESTION # 120
Refer to the exhibits.

The configuration of an SD-WAN rule and the corresponding rule status and routing table are shown.
You want to understand the expected behavior for traffic that matches the SD-WAN rule, at the time the output was collected.
Based on the exhibits, which behavior can you expect for traffic that matches the SD-WAN rule?
Answer: A
Explanation:
The configured rule operates in Lowest Cost (SLA) mode and references both HUB1_HC and HUB1_HTTP.
Although the configured interface-preference sequence is members 4, 5, and 6, that order is not sufficient by itself to determine the active path after SLA evaluation.
The runtime diagnose sys sdwan service4 3 output shows member 6, HUB1-VPN3, first in the evaluated member list. It is alive and displays sla(0x3), indicating that it satisfies the SLA conditions being evaluated. In SLA mode, FortiGate first considers SLA eligibility and cost; configuration order acts as a later tiebreaker.
Fortinet documents this Lowest Cost selection behavior .
Because load balancing is not enabled, traffic is not distributed over all three members. The currently preferred usable member is therefore HUB1-VPN3, making D correct.
NEW QUESTION # 121
Refer to the exhibit, which shows the output o! the BGP database.
Which two statements are correct? (Choose two.)
Answer: A,B
Explanation:
For Option A:In Fortinet BGP (and standard BGP), when a prefix is displayed with an " i " (lowercase i) in the Path column, it represents an internal prefix that originated from the local router, typically configured via the BGP " network " command. In the exhibit, the prefix 10.20.30.0/24 is listed with a Path value of i, indicating it was injected into BGP by the local router using the network statement, not via redistribution from another routing protocol. The same logic applies to i as documented: " Origin code ' i ' means the route was injected via the network command. " For Option D:The get router info bgp network output is a summary table displaying both local and received BGP routes. It lists all known routes to the BGP process, whether received from peers or originated locally.
The exhibit shows all BGP prefixes known to the local router, matching the official admin guide's description of this command's output.
Explanation for B and C:
The phrase "legacy route advertisement" is not formalized in BGP documentation or Fortinet's admin guide; the output uses standard BGP mechanics.
If a route was redistributed into BGP from another routing protocol, the Path field would display a " ? " (question mark) for incomplete (redistributed) origin. Here the /24 route has " i " so it is NOT a redistribution.
References:
FortiOS Administration Guide: BGP Configuration and Route Table Interpretation Official BGP Command Reference: Show BGP Network, Path Codes, Route Origination Indicators
NEW QUESTION # 122
Consider the scenario where the server name indication (SNI) does not match either the common name (CN) or any of the subject alternative names (SAN) in the server certificate. Which two actions will FortiGate take when using the default settings for SSL certificate inspection? (Choose two answers)
Answer: A,B
Explanation:
The correct answers are C and D .
The study guide states: "SSL certificate inspection relies on extracting the FQDN of the URL from either: TLS extension server name indication (SNI), SSL certificate common name (CN)." It also says:
"When using SSL certificate inspection, FortiGate is not decrypting the traffic. It is only inspecting the server digital certificates and the SNI field, which are interchanged before the encryption." This proves the second part of the answer:
* under SSL certificate inspection , FortiGate does not decrypt the traffic
* therefore, if the traffic is allowed , it still passes without decryption That makes D correct.
For the SNI mismatch behavior, the FortiOS administration guide describes the default Server certificate SNI check behavior as:
"Enable: If it is mismatched use the CN in the server certificate for URL" So if the SNI does not match the CN or any SAN, FortiGate falls back to using the CN from the Subject field for URL handling under the default setting. That makes C correct.
Why the other options are wrong:
* A is wrong because with the default SNI-check behavior, when the SNI mismatches the certificate identity, FortiGate does not continue using the mismatched SNI . Instead, it uses the CN in the server certificate for the URL .
* B is not the best answer in this single pair selection . While certificate inspection does not decrypt traffic, the key default behavior the documents explicitly highlight for this mismatch case is:
* use the CN when SNI mismatches , and
* certificate inspection does not decrypt allowed HTTPS traffic .
So the verified answers are: C, D .
NEW QUESTION # 123
Exhibit.
Refer to the exhibit, which shows a FortiGate configuration.
An administrator is troubleshooting a web filter issue on FortiGate. The administrator has configured a web filter profile and applied it to a policy; however the web filter is not inspecting any traffic that is passing through the policy.
What must the administrator do to fix the issue?
Answer: C
Explanation:
The exhibit shows a FortiGate configuration under config system fortiguard related to web filtering and FortiGuard options. There is a line:
set webfilter-force-off enable
According to official Fortinet documentation, the " webfilter-force-off " option, when enabled, causes the FortiGate to bypass web filtering for all traffic-even if a web filter profile is applied to a policy.
This override is typically used for troubleshooting or performance reasons and is documented as an explicit bypass feature.
If an administrator wants to enforce web filtering inspection, this setting must be disabled. The correct way to restore web filtering functionality is to run:
set webfilter-force-off disable
Once done, traffic passing through policies with web filter profiles will be inspected and filtered as per configuration. Other settings such as timeout or cache TTL do not bypass web filtering; they only affect operational nuances.
Reference:
FortiOS Administration Guide: Web Filtering, FortiGuard Options, "webfilter-force-off" CLI
NEW QUESTION # 124
......
Unlike other NSE7_FSN_AR-7.6 study materials, there is only one version and it is not easy to carry. Our NSE7_FSN_AR-7.6 exam questions mainly have three versions which are PDF, Software and APP online, and for their different advantafes, you can learn anywhere at any time. And the prices of our NSE7_FSN_AR-7.6 training engine are reasonable for even students to afford and according to the version that you want to buy.
NSE7_FSN_AR-7.6 Test Dumps: https://www.prep4away.com/Fortinet-certification/braindumps.NSE7_FSN_AR-7.6.ete.file.html