2026 Latest DumpsMaterials JN0-364 PDF Dumps and JN0-364 Exam Engine Free Share: https://drive.google.com/open?id=1MZNuoobB-EW9qVuz97I3WqLide7BOoZt
Time is flying and the exam date is coming along, which is sort of intimidating considering your status of review process. The more efficient the materials you get, the higher standard you will be among competitors. So, high quality and high accuracy rate JN0-364 practice materials are your ideal choice this time. By adding all important points into JN0-364 practice materials with attached services supporting your access of the newest and trendiest knowledge, our JN0-364 practice materials are quite suitable for you right now.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: IPv6 | 8-12% | - Static and dynamic routing - Address types and format - Autoconfiguration - OSPFv3 and BGP for IPv6 |
| Topic 2: High Availability | 5-8% | - Graceful restart - Nonstop active routing - NSR and GRES concepts |
| Topic 3: Protocol-Independent Routing | 10-15% | - Martian addresses - Filter-based forwarding - Routing instances and RIB groups - Load balancing - Static, aggregate, and generated routes |
| Topic 4: Border Gateway Protocol (BGP) | 20-25% | - Path selection and attributes - IBGP and EBGP - Basic operation and message types - Configuration and troubleshooting - Policy and route filtering |
| Topic 5: Multiprotocol Label Switching (MPLS) | 12-18% | - LDP and RSVP - Labels and LIB - Configuration and monitoring - Terminology and forwarding - Segment routing basics |
| Topic 6: Spanning Tree Protocols | 8-12% | - Port roles and states - BPDU and protection features - STP, RSTP, MSTP, VSTP - Configuration and convergence |
| Topic 7: Open Shortest Path First (OSPF) | 15-20% | - Areas and router types - Configuration and troubleshooting - Link-state database - LSA types and operation |
| Topic 8: Intermediate System to Intermediate System (IS-IS) | 10-15% | - Configuration and monitoring - PDUs and TLVs - Metrics and wide metrics - Adjacencies and levels |
| Topic 9: Tunnels | 5-8% | - Tunnel configuration and usage - GRE and IP-IP tunnels |
| Topic 10: Layer 2 Bridging and VLANs | 8-12% | - Bridging concepts - VLANs and trunking - Service provider switching features |
>> Juniper JN0-364 Cert Exam <<
DumpsMaterials's Juniper JN0-364 exam training materials is the best training materials. If you are an IT staff, it will be your indispensable training materials. Do not take your future betting on tomorrow. DumpsMaterials's Juniper JN0-364 exam training materials are absolutely trustworthy. We are dedicated to provide the materials to the world of the candidates who want to participate in IT exam. To get the Juniper JN0-364 Exam Certification is the goal of many IT people & Network professionals. The pass rate of DumpsMaterials is incredibly high. We are committed to your success.
NEW QUESTION # 27
Referring to the exhibit. Routers R1 and R4 have a VRRP priority of 90, while R2 and R3 have default VRRP priorities Referring to the exhibit, which router will be elected as the primary VRRP router?
Answer: D
Explanation:
In a VRRP (Virtual Router Redundancy Protocol) configuration, the router with the highest priority is elected as the primary (master) router. If two or more routers have the same highest priority, the one with the highest IP address is elected.
Default VRRP priority is 100.
From the question:
- R1 and R4 have a priority of 90.
- R2 and R3 have default priority (100).
Since R2 and R3 both have the highest priority (100), VRRP will elect the one with the higher IP address as the master.
- R2: 203.0.113.2
- R3: 203.0.113.3 โ higher IP
NEW QUESTION # 28
Which two statements regarding GRE and IP-IP tunnels are correct? (Choose two.)
Answer: A,D
Explanation:
In Juniper Networks Junos OS,Generic Routing Encapsulation (GRE)andIP-in-IP (IP-IP)are common tunneling mechanisms used to transport packets across a network by encapsulating them within another protocol. Understanding the header structure and the limitations of these protocols is essential for proper MTU (Maximum Transmission Unit) management and security design.
Overhead (Option A):
Both GRE and IP-IP tunnels operate by adding an additional IP header to the original packet. An IP-IP tunnel (Protocol 4) adds a20-byteIPv4 header. A GRE tunnel (Protocol 47) adds the same20-bytedelivery IP header plus a minimum4-byteGRE header (totaling 24 bytes, which can increase if keys or sequencing are used).
Because these headers are added to the payload, the total size of the packet increases. This "overhead" means that if the original packet was already at the MTU limit (e.g., 1500 bytes), the encapsulated packet will exceed it, potentially leading to fragmentation or the need to adjust theTCP MSS (Maximum Segment Size).
Encryption (Option D):
Crucially, according to Juniper Service Provider documentation, neither GRE nor IP-IP provides native encryptionor data confidentiality. They are encapsulation protocols, not security protocols. The payload remains in cleartext and is visible to any device along the path. If security and encryption are required for data traversing these tunnels, they must be combined withIPsec (IP Security). While GRE is often used as the
"carrier" for IPsec (to allow multicast or dynamic routing protocols which IPsec alone does not support), the GRE protocol itself remains an unencrypted delivery mechanism. Therefore, statements A and D accurately describe the architectural behavior of these tunnel types.
NEW QUESTION # 29
Click the Exhibit button.
Referring to the exhibit, which two statements are correct? (Choose two.)
Answer: A,B
Explanation:
All listed ports are in the designated role and forwarding state, and the designated bridge ID shown matches the local bridge ID, which indicates the device is acting as the root bridge for this spanning-tree instance.
The bridge ID begins with 32768, which corresponds to the default bridge priority of 32,768 (32k).
NEW QUESTION # 30
Which feature allows Junos OS to perform recursive lookups for static route next hops?
Answer: B
Explanation:
In standard routing, astatic routeis typically considered valid only if the specified next-hop IP address is directly reachable on a local subnet. However, in complex service provider designs, the next-hop might be a
"distant" IP address that is reachable through another route (such as a BGP route or another static route). This process of looking up a next-hop within another routing entry is calledrecursive lookup.
In Junos OS, theresolve (Option A)parameter is explicitly used to enable this behavior for static routes.
According to Juniper technical documentation, when you append the resolve keyword to a static route configuration, you are instructing the Routing Engine to search the routing table to find a path to that distant next-hop.
For example:
set routing-options static route 10.1.1.0/24 next-hop 192.168.100.1 resolve If 192.168.100.1 is not on a local interface but is reachable via an OSPF route, the router will "resolve" the path and install the 10.1.1.0/24 route into the forwarding table using the OSPF path's exit interface.
Why other options are incorrect:
* Discard (Option B)andReject (Option C)are "next-hop types" used to drop traffic, either silently (discard) or by sending an ICMP unreachable message (reject).
* Next-table (Option D)is used forInter-VRF routing, where the router is told to look up the destination in a completely different routing instance (like a VRF table), which is a different architectural function than a recursive next-hop lookup within the same table.
NEW QUESTION # 31
Which OSPF packet type is used to initiate and maintain neighbor relationships?
Answer: D
Explanation:
Hello packets are used by OSPF routers to discover neighbors and establish adjacency relationships. They are also sent periodically to maintain the neighbor relationship and verify that neighboring routers are still reachable.
NEW QUESTION # 32
......
Now, do you want to enjoy all these Juniper JN0-364 Exam benefits? Looking for a simple and quick way to pass the Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) exam? If your answer is yes then you do not need to worry about it. Just visit the "DumpsMaterials" exam questions and download "DumpsMaterials" exam questions and start preparation right now.
JN0-364 Exams Dumps: https://www.dumpsmaterials.com/JN0-364-real-torrent.html
2026 Latest DumpsMaterials JN0-364 PDF Dumps and JN0-364 Exam Engine Free Share: https://drive.google.com/open?id=1MZNuoobB-EW9qVuz97I3WqLide7BOoZt