we can give you 100% pass rate guarantee. 4A0-D03 practice quiz is equipped with a simulated examination system with timing function, allowing you to examine your 4A0-D03 learning results at any time, keep checking for defects, and improve your strength. Besides, during the period of using 4A0-D03 learning guide, we also provide you with 24 hours of free online services, which help to solve any problem for you at any time and sometimes mean a lot to our customers.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Layer 2 EVPN Services | 25% | - EVPN Route Types 1–4 - Anycast Gateway and IRB - Multi-homing and Ethernet Segments |
| Topic 2: Layer 3 EVPN Services | 25% | - EVPN Route Type 5 - Symmetric and asymmetric routing - VRF integration and route targets |
| Topic 3: SR Linux and EVPN Fundamentals | 25% | - VXLAN encapsulation and underlay - EVPN control plane and MP-BGP - SR Linux architecture and CLI |
| Topic 4: Data Center Interconnect (DCI) Solutions | 25% | - BGP route policies and route reflectors - Gateway-less EVPN DCI - Interoperability with Nokia 7750 SR |
These Nokia 4A0-D03 exam questions have a high chance of coming in the actual 4A0-D03 test. You have to memorize these 4A0-D03 questions and you will pass the Nokia 4A0-D03 test with brilliant results. The price of Nokia 4A0-D03 updated exam dumps is affordable.
NEW QUESTION # 10
Consider the exhibit.
Leaf-1 has received an ARP request from host-1 for host-2. Leaf-1 has added host-1's MAC address in its MAC table and host-1's MAC/IP addresses in its proxy-ARP table.
Which of the following steps is FALSE?
Answer: A
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
When Leaf-1 receives an ARP request from Host-1, it learns the source MAC address in the local MAC table and learns the source IP/MAC binding in the proxy ARP table. For EVPN distribution, the relevant control-plane advertisement is an EVPN route type 2 MAC/IP advertisement containing Host-1's MAC and the actual host IP address, 192.168.100.1. This allows remote PEs to populate their EVPN-derived forwarding and proxy ARP state with the correct endpoint binding. Option A is false because advertising the host MAC with the IP address set to 0.0.0.0 does not represent the learned MAC/IP binding required for proxy ARP synchronization. A MAC-only RT-2 advertisement may exist in EVPN contexts, but the question specifically states that Leaf-1 has learned the MAC/IP binding through ARP and is distributing that information. Therefore, the valid advertisement must include the real host IP address. Remote PEs use the MAC/IP route to learn the endpoint, not an all-zero IP placeholder for this proxy ARP learning event. Reference: EVPN RT-2 MAC/IP advertisement, proxy ARP table population, endpoint synchronization.
NEW QUESTION # 11
Consider the exhibit.
All three leafs have an EVPN MP-BGP session with the route reflector in Spine-1. Leaf-2 and Leaf-3 have existing instances of an L2 EVPN named MAC VRF-1. Leaf-1 has just enabled a new instance of MAC VRF-1.
Which of the following steps is NOT taken when this new instance is enabled?
Answer: A
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
When a new Layer 2 EVPN MAC-VRF instance is enabled, the PE advertises an Inclusive Multicast Ethernet Tag route, commonly called an IMET route or EVPN route type 3. The IMET route is used to auto-discover remote PEs that participate in the same EVPN service and to build the BUM flooding list for that MAC-VRF. In this topology, all leaf routers peer with the route reflector on Spine-1. Leaf-1 therefore advertises its IMET route to the route reflector, not directly to Leaf-2 and Leaf-3. The route reflector then reflects the EVPN update to the other client leaves. Leaf-2 and Leaf-3 import the route based on matching route-target policy and add Leaf-1 to the replication list for broadcast, unknown unicast, and multicast traffic. Option B is the step that is not taken because it incorrectly describes direct leaf-to-leaf EVPN advertisement. In a route-reflector design, the RR centralizes EVPN route distribution and avoids the need for a full mesh of MP-BGP EVPN sessions between leaves. Reference: EVPN RT-3 IMET route, route-reflector operation, BUM flooding-list auto-discovery.
NEW QUESTION # 12
Consider the exhibit.
All connected leaf routers have the same Ethernet segment configuration. The IP-VRF is configured properly and is operational.
Which of the following statements is FALSE?
Answer: D
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
The exhibit describes a Layer 3 multi-homing scenario where the Ethernet Segment is associated with an IP-VRF and the configuration references an EVI value of 1000. The segment is configured with all-active multi-homing, allowing multiple attached leaf routers to advertise reachability for the same external L3 next-hop or third-party prefix attachment. In this model, the Ethernet Segment represents the shared L3 attachment and is used by EVPN to associate remote prefix reachability with the multi-homed segment. The incorrect statement is that a LAG must be configured on the connected leaf routers and the host. That requirement is specific to many Layer 2 all-active host attachment designs, where the host commonly uses LACP toward multiple leaf routers and the leaf LAG subinterfaces are associated with the Ethernet Segment. In Layer 3 multi-homing, the attached device can be a router or VNF, and the EVPN ES association can be used for L3 prefix reachability without mandating that the host side be configured as a LAG. Reference: L3 EVPN multi-homing, EVI association, all-active Ethernet Segment behavior.
NEW QUESTION # 13
Consider the exhibit.
Which of the following statements is FALSE?
Answer: B
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
In an SR Linux Layer 2 EVPN MAC-VRF, locally attached MAC addresses are learned through the data plane on local access interfaces, while remote MAC addresses are learned from MP-BGP EVPN control-plane advertisements and installed with a VXLAN next-hop. The exhibit shows one local learned MAC on an Ethernet subinterface and another MAC learned through EVPN with a VXLAN interface and VNI 100. The remote VTEP or next-hop information identifies the remote endpoint, and the VNI maps the received VXLAN traffic to the correct MAC-VRF service. The false statement is C because saying that the MAC address associated with the vxlan-interface "will not age out" is too absolute. A remote EVPN MAC is not aged in the same way as a local data-plane-learned MAC, but it can still be removed when the corresponding EVPN route is withdrawn, invalidated, or no longer present in the control plane. The "N/A" style aging behavior does not mean permanent retention. Reference: SR Linux MAC-VRF verification, local MAC learning, EVPN-learned remote MACs, VXLAN VNI mapping.
NEW QUESTION # 14
Consider the exhibit.
Host-2 is sending data to Host-1. The network is designed to use asymmetric routing.
Which of the following statements about the operation of the data plane is TRUE?
Answer: D
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
In asymmetric EVPN IRB, the ingress PE performs routing from the source subnet into the destination subnet, then forwards the packet across the VXLAN overlay using the destination MAC-VRF/VNI. The egress PE does not perform another IP-VRF lookup for that packet; it performs Layer 2 forwarding in the destination MAC-VRF. In this scenario, Host-2 sends traffic toward Host-1. After the ingress routing decision, the traffic arrives at Leaf-2 in the context of the destination MAC-VRF, mac-vrf-1. Leaf-2 then performs a MAC lookup in mac-vrf-1 and forwards the frame to Host-1. Option D is therefore correct. Option A reverses the forwarding direction and misidentifies the leaf action. Option B incorrectly sends mac-vrf-2 traffic toward the IP-VRF on Leaf-2, even though Leaf-2 is acting as the egress PE for Host-1. Option C is also incorrect because the egress forwarding action is based on the MAC table in the destination MAC-VRF, not an IP-VRF ARP lookup at that stage. Reference: asymmetric L3 EVPN IRB data-plane operation, ingress routing and egress MAC forwarding.
NEW QUESTION # 15
......
Thousands of Nokia SR Linux EVPN and Data Center Interconnect (4A0-D03) exam applicants are satisfied with our 4A0-D03 practice test material because it is according to the latest Nokia SR Linux EVPN and Data Center Interconnect (4A0-D03) exam syllabus and we also offer up to 1 year of free Nokia Dumps updates. Visitors of Free4Torrent can check the 4A0-D03 product by trying a free demo. Buy the 4A0-D03 test preparation material now and start your journey towards success in the 4A0-D03 examination.
Valid 4A0-D03 Exam Online: https://www.free4torrent.com/4A0-D03-braindumps-torrent.html