We are specialized in providing our customers with the most reliable and accurate SRAN-Radio-Network-Performance-Optimization exam guide and help them pass their exams. With our SRAN-Radio-Network-Performance-Optimization learning engine, your exam will be a piece of cake. We have a lasting and sustainable cooperation with customers who are willing to purchase our SRAN-Radio-Network-Performance-Optimization Actual Exam. We try our best to renovate and update our SRAN-Radio-Network-Performance-Optimizationstudy materials in order to help you fill the knowledge gap during your learning process, thus increasing your confidence and success rate.
| Section | Objectives |
|---|---|
| Troubleshooting and Performance Analysis | - Network issue identification and resolution
|
| LTE/NR Performance Optimization | - Optimization techniques
|
| RF Optimization Principles | - Coverage and capacity optimization
|
| SRAN Architecture Overview | - SRAN network structure and components
|
| Radio Network Performance Fundamentals | - Key performance indicators (KPIs)
|
>> Reliable SRAN-Radio-Network-Performance-Optimization Exam Sample <<
In order to meet the different demands of the different customers, these experts from our company have designed three different versions of the SRAN-Radio-Network-Performance-Optimization reference guide. All customers have the right to choose the most suitable version according to their need. The PDF version of the SRAN-Radio-Network-Performance-Optimization exam prep has many special functions, including download the demo for free, support the printable format and so on. We can make sure that the PDF version of the SRAN-Radio-Network-Performance-Optimization Test Questions will be very convenient for all people. Of course, if you choose our SRAN-Radio-Network-Performance-Optimization study materials, you will love it.
NEW QUESTION # 11
In the case of 5G SA, which of the following triggers the Radio Link Failure, or RLF, handling mechanism?
Answer: D
Explanation:
The correct answer is C.
In 5G SA, Radio Link Failure handling is mainly UE-driven. The UE monitors the radio link quality using lower-layer indications such as in-sync and out-of-sync indications. If the UE receives enough out-of-sync indications, it starts the relevant RLF timer, commonly associated with T310 behavior. If the link does not recover before the timer expires, the UE declares Radio Link Failure and starts recovery, such as RRC re- establishment.
The gNodeB can detect uplink problems and may release or reconfigure the UE, but the classical RLF handling mechanism is triggered at the UE side.
So the correct answer is:
UE indication timer only.
NEW QUESTION # 12
The CB009425 feature provides several enhancements to improve the transmission link budget for VoNR, offering a better customer experience. Which statements are correct regarding this feature?
Answer: A
Explanation:
The correct answer is D.
The feature is focused on improving VoNR link robustness and user experience, especially near the cell edge or in difficult RF conditions. VoNR is sensitive to packet loss, delay, and uplink coverage limitations.
Therefore, link-budget improvement features commonly target BLER behavior, transport block sizing, and MCS robustness.
Statement A is correct because minimizing Packet Loss Rate, or PLR, directly improves VoNR speech quality and reduces mute, clipping, or robotic voice effects.
Statement B is correct because VoNR bearers can use specific initial BLER targets. A more suitable BLER target helps the scheduler choose a more robust MCS for voice traffic.
Statement C is correct because a configurable uplink minimum TBS, or Transport Block Size, helps ensure that small VoNR packets are transmitted efficiently and reliably.
Statement D is correct because MCS downgrade control can improve robustness by selecting a more conservative modulation and coding scheme for VoNR DRBs when radio conditions require it.
Therefore, all listed enhancements are part of the VoNR link-budget improvement concept:
A, B, C, and D.
NEW QUESTION # 13
In the context of mmWave deployments , what is the primary benefit of analog beamforming ?
Answer: C
Explanation:
The correct answer is A .
In mmWave systems, beamforming is essential because FR2 signals suffer from high path loss and blockage.
Analog beamforming uses fewer RF chains than fully digital beamforming, so it is cheaper and less complex in terms of RF hardware, power consumption, and implementation. Research and industry references explain that analog and hybrid beamforming architectures reduce the number of required ADCs/RF chains compared with fully digital beamforming, lowering cost and power complexity.
However, analog beamforming has limitations. It usually forms one beam, or a limited number of beams, at a time from a panel. Supporting multiple independent simultaneous beams and more UEs per sector is more associated with digital or hybrid beamforming, not pure analog beamforming.
Therefore, the primary benefit is:
Low cost and low complexity for coverage at higher mmWave bands.
NEW QUESTION # 14
Evaluate the impact of using MantaRay SON's centralized PCI optimization module compared to distributed SON implementations.
Answer: D
Explanation:
The correct answer is C .
A centralized SON approach has broader network-level visibility than a purely distributed implementation.
For PCI optimization , this is important because PCI conflicts, PCI confusion, and neighbor-related PCI issues are not always local to one cell. They may involve several neighboring cells, multiple layers, and sometimes multiple vendors.
Nokia positions MantaRay SON as a centralized, AI-powered network optimization and automation platform for improving RAN quality, efficiency, and customer experience. Nokia also describes MantaRay SON as supporting multi-supplier/non-real-time RIC functionality in the MantaRay SMO framework.
So compared with distributed SON, centralized PCI optimization can better analyze wider-area PCI relationships and resolve PCI problems across multi-vendor or multi-layer networks.
Therefore, the correct statement is:
Centralized PCI optimization can identify and resolve PCI issues across multi-vendor networks.
NEW QUESTION # 15
What is the role of admission control in 5G networks ?
Answer: B
Explanation:
The correct answer is D .
Admission control is responsible for deciding whether a new UE connection, bearer, service, or session can be accepted by the cell without negatively affecting existing users and services.
In 5G RAN, admission control checks available radio resources such as:
* PRB availability
* PDCCH/PUCCH capacity
* UE context capacity
* QoS requirements
* GBR or non-GBR bearer requirements
* Cell load and congestion status
It does not directly manage modulation schemes; that is handled by link adaptation. It also does not directly increase spectral efficiency or optimize downlink throughput, although good admission control indirectly protects user experience and avoids overload.
So the main role of admission control is:
To check whether there are enough resources for new connections.
NEW QUESTION # 16
......
Our Nokia SRAN-Radio-Network-Performance-Optimization exam brain dumps are regularly updated with the help of seasoned professionals. We see to it that our assessment is always at par with what is likely to be asked in the actual Nokia SRAN-Radio-Network-Performance-Optimization examination. And If you’re skeptical about the quality of our Nokia SRAN-Radio-Network-Performance-Optimization exam dumps, you are more than welcome to try our demo for free and see what rest of the SRAN-Radio-Network-Performance-Optimization Exam applicants experience by availing our products. Our methods are tested and proven by more than 90,000 successful Nokia certification examinees whose trusted VCETorrent. Want to know what they said about us, visit our testimonial section and read first-hand experiences from verified users.
SRAN-Radio-Network-Performance-Optimization Valid Test Tutorial: https://www.vcetorrent.com/SRAN-Radio-Network-Performance-Optimization-valid-vce-torrent.html