You know, the time is very tight now. You must choose a guaranteed product. SRAN-Radio-Network-Performance-Optimization study materials have a 99% pass rate. This will definitely give you more peace of mind when choosing our SRAN-Radio-Network-Performance-Optimization exam questiosn. In today's society, everyone is working very hard. If you want to walk in front of others, you must be more efficient. After 20 to 30 hours of studying SRAN-Radio-Network-Performance-Optimization Exam Materials, you can take the exam and pass it for sure.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Radio Network Performance Monitoring | 20-25% | - Performance data collection and analysis - Threshold configuration and alerting - Real-time network monitoring techniques - KPI definition and measurement - Performance monitoring tools and dashboards |
| Topic 2: Performance Troubleshooting | 20-25% | - Optimization case studies - Common performance issues diagnosis - Network failure identification and resolution - Troubleshooting tools utilization - Root cause analysis methodologies |
| Topic 3: Radio Network Optimization Techniques | 25-30% | - Handover optimization - Interference analysis and mitigation - Capacity optimization strategies - Coverage optimization methods - Parameter tuning best practices - Load balancing techniques |
| Topic 4: SRAN Optimization Tools and Reports | 10-15% | - Nokia NetAct and performance tools - Configuration management for optimization - Automated optimization features - Report generation and interpretation |
| Topic 5: SRAN Architecture and Fundamentals | 15-20% | - Single RAN integration principles - Radio access concepts and principles - SRAN solution components and functions - SRAN network architecture overview |
>> Nokia SRAN-Radio-Network-Performance-Optimization Valid Guide Files <<
A good brand is not a cheap product, but a brand that goes well beyond its users' expectations. The value of a brand is that the SRAN-Radio-Network-Performance-Optimization exam questions are more than just exam preparation tool -- it should be part of our lives, into our daily lives. Do this, therefore, our SRAN-Radio-Network-Performance-Optimization question guide has become the industry well-known brands, but even so, we have never stopped the pace of progress, we have been constantly updated the SRAN-Radio-Network-Performance-Optimization real study guide. Our SRAN-Radio-Network-Performance-Optimization real study guide provides users with comprehensive learning materials, so that users can keep abreast of the progress of The Times.
NEW QUESTION # 15
Which of the following best describes one of the primary purposes of the Coverage and Quality use case?
Answer: B
Explanation:
The correct answer is B .
The Coverage and Quality use case is used in network planning and optimization to identify RF problem areas. These may include:
Low RSRP or weak coverage areas
Poor SINR or low radio quality areas
High interference zones
Overshooting cells
Coverage holes
Areas where users experience poor throughput or poor accessibility
This type of use case helps NPO engineers prioritize optimization actions such as antenna tilt changes, azimuth changes, parameter tuning, neighbor optimization, power adjustment, or site expansion.
The other options are not the primary purpose:
VPN tunnel configuration is a connectivity/security task.
LCBIN-to-CSV conversion is a data processing task.
Replacing the Kronos parser is a tool-chain or troubleshooting function, not the main purpose of coverage and quality analysis.
So the best answer is:
To identify problem areas such as low coverage or high interference.
NEW QUESTION # 16
During an intra-gNB DU handover , what is the role of the RRC Reconfiguration message sent by the gNB- CU to the UE?
Answer: B
Explanation:
The correct answer is A .
During an intra-gNB DU handover , the UE is moved from one cell/DU resource to another under the same gNB-CU control. The gNB-CU coordinates the handover preparation and sends an RRC Reconfiguration message to the UE.
The role of this message is to provide the UE with the required handover command information, such as:
Target PCell configuration
Radio resource configuration
Mobility control information
Random access configuration, when needed
Measurement or reconfiguration-related information
After receiving the RRC Reconfiguration , the UE performs the handover execution procedure toward the target cell and later responds with RRC Reconfiguration Complete .
Option B is incorrect because admission control and source-cell scheduling suspension are internal network- side procedures, not the UE-facing role of the RRC Reconfiguration message.
Option C is not the best answer because user-plane resource transfer is handled between gNB-CU/gNB-DU functions, while dedicated preamble allocation may be part of the configuration but is not the main purpose of the message.
Option D is incorrect because RLC reestablishment and PDCP recovery are lower-layer/user-plane handling actions, not the primary purpose of the RRC Reconfiguration message.
Therefore, the correct role is:
It instructs the UE to perform handover to the target PCell and provides measurement/configuration information.
NEW QUESTION # 17
At which mark are all conditions fulfilled for energy saving , so the cell will be switched off? Refer to the image below.
Answer: A
Explanation:
The correct answer is B , which corresponds to mark C in the diagram.
In the diagram, the energy-saving process follows these stages:
Before mark B , the cell is entering the power-saving period, but the required load condition has not yet been satisfied for the required duration.
At mark B , the measured load has gone below the configured threshold, but the cell is not switched off immediately. The system must confirm that the load remains below the required threshold for the configured time.
At mark C , the load has stayed below the required threshold for the required duration, shown as 5 minutes in the diagram. At this point, all conditions are fulfilled, and the cell can be switched off. The diagram also shows the state becoming:
energySavingState = energySaving
Marks D and E are already inside or near the later part of the power-saving period. Mark E is associated with operator suspension/exit behavior, not the initial moment when all switch-off conditions are first fulfilled.
NEW QUESTION # 18
What is the role of admission control in 5G networks ?
Answer: C
NEW QUESTION # 19
The CB009425 feature provides several enhancements to improve the transmission link budget for VoNR, offering a better customer experience. Which statements are correct regarding this feature?
Answer: G
Explanation:
The correct answer is D.
The feature is focused on improving VoNR link robustness and user experience, especially near the cell edge or in difficult RF conditions. VoNR is sensitive to packet loss, delay, and uplink coverage limitations.
Therefore, link-budget improvement features commonly target BLER behavior, transport block sizing, and MCS robustness.
Statement A is correct because minimizing Packet Loss Rate, or PLR, directly improves VoNR speech quality and reduces mute, clipping, or robotic voice effects.
Statement B is correct because VoNR bearers can use specific initial BLER targets. A more suitable BLER target helps the scheduler choose a more robust MCS for voice traffic.
Statement C is correct because a configurable uplink minimum TBS, or Transport Block Size, helps ensure that small VoNR packets are transmitted efficiently and reliably.
Statement D is correct because MCS downgrade control can improve robustness by selecting a more conservative modulation and coding scheme for VoNR DRBs when radio conditions require it.
Therefore, all listed enhancements are part of the VoNR link-budget improvement concept:
A, B, C, and D.
NEW QUESTION # 20
......
The SRAN-Radio-Network-Performance-Optimization practice materials are a great beginning to prepare your exam. Actually, just think of our SRAN-Radio-Network-Performance-Optimization practice materials as the best way to pass the exam is myopic. They can not only achieve this, but ingeniously help you remember more content at the same time. It is estimated conservatively that the passing rate of the exam is over 98 percent with our SRAN-Radio-Network-Performance-Optimization Study Materials as well as considerate services. We not only provide all candidates with high pass rate study materials, but also provide them with good service.
Review SRAN-Radio-Network-Performance-Optimization Guide: https://www.torrentvce.com/SRAN-Radio-Network-Performance-Optimization-valid-vce-collection.html