P.S. Free & New 4A0-D03 dumps are available on Google Drive shared by NewPassLeader: https://drive.google.com/open?id=1cdwSWe29zAWHMiueP61ecG1QDWNbGI0c
The 4A0-D03 mock exam setup can be configured to a particular style and arrive at unique questions. NewPassLeader 4A0-D03 practice exam software went through real-world testing with feedback from more than 90,000 global professionals before reaching its latest form. Our Nokia 4A0-D03 Practice Test software is suitable for computer users with a Windows operating system. NewPassLeader Nokia 4A0-D03 practice exam support team cooperates with users to tie up any issues with the correct equipment.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Layer 2 EVPN Services | 25% | - Anycast Gateway and IRB - EVPN Route Types 1–4 - Multi-homing and Ethernet Segments |
| Topic 2: Data Center Interconnect (DCI) Solutions | 25% | - BGP route policies and route reflectors - Interoperability with Nokia 7750 SR - Gateway-less EVPN DCI |
| Topic 3: Layer 3 EVPN Services | 25% | - Symmetric and asymmetric routing - VRF integration and route targets - EVPN Route Type 5 |
| Topic 4: SR Linux and EVPN Fundamentals | 25% | - EVPN control plane and MP-BGP - SR Linux architecture and CLI - VXLAN encapsulation and underlay |
NewPassLeader also has a Nokia Practice Test engine that can be used to simulate the genuine Nokia SR Linux EVPN and Data Center Interconnect (4A0-D03) exam. This online practice test engine allows you to answer questions in a simulated environment, giving you a better understanding of the exam's structure and format. With the help of this tool, you may better prepare for the Nokia SR Linux EVPN and Data Center Interconnect (4A0-D03) test.
NEW QUESTION # 57
Which of the following statements about a distributed Layer 2 EVPN is FALSE?
Answer: D
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
In a distributed Layer 2 EVPN service, the local leaf learns host reachability from frames received on access interfaces. When a host replies to an ARP request, the local leaf can learn the source MAC address from the Ethernet frame and install it in the MAC forwarding table. If the ARP payload contains an IP/MAC binding, the PE can also use that information for proxy ARP and EVPN MAC/IP advertisement. The local PE then advertises the learned endpoint reachability using EVPN route type 2 to its BGP EVPN peers or route reflector. The false statement is B. The ARP reply is not replicated to every leaf in the flooding list as a normal operation. EVPN's purpose is to reduce unnecessary flooding by distributing endpoint reachability through the control plane. BUM replication is used for broadcast, unknown unicast, and multicast traffic when needed, but a learned ARP reply does not require blind replication to all remote leaves. Instead, the leaf advertises the learned MAC/IP state through MP-BGP EVPN, allowing remote PEs to install accurate forwarding and proxy ARP state. Reference: distributed L2 EVPN operation, ARP learning, EVPN RT-2 advertisement.
NEW QUESTION # 58
Which of the following statements about utilizing asymmetric routing in an L3 EVPN network is FALSE?
Answer: A
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
In asymmetric L3 EVPN routing, the ingress PE performs the routing decision and then sends traffic across the overlay in the context of the destination MAC-VRF. The egress PE performs Layer 2 MAC forwarding only toward the destination host. This is why options A and B correctly describe asymmetric data-plane behavior. Asymmetric routing relies heavily on EVPN route type 2 MAC/IP Advertisement routes because the ingress PE must know the destination host's MAC/IP binding and the destination bridge domain information. EVPN route type 5, which advertises IP prefixes, is a symmetric L3 EVPN mechanism and is not mandatory for asymmetric routing. Therefore, option C is false. Option D is treated as correct in this asymmetric-routing model because each PE participating in inter-subnet forwarding needs the destination MAC-VRF context to encapsulate traffic toward the correct L2 VNI. This requirement is one reason asymmetric routing scales less efficiently than symmetric routing: MAC-VRF presence and host reachability information must be broadly available. Symmetric routing improves scale by using an IP-VRF routed VXLAN interface and RT-5 prefix routes instead. Reference: asymmetric L3 EVPN routing, ingress IP/MAC forwarding, egress MAC forwarding, RT-2 versus RT-5 usage.
NEW QUESTION # 59
Consider the exhibit.
dcgw10 is a Nokia 7750SR and is used as the integrated gateway.
Which of the following is NOT configured in VPLS 100 on dcgw10?
Answer: C
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
For Layer 2 data center interconnect using an integrated gateway, VPLS 100 on the Nokia 7750 SR represents the WAN-side Layer 2 VPN service. The VPLS requires an EVI because EVPN uses the EVI to identify the L2 service instance in the control plane. It also requires BGP EVPN signaling with the appropriate route targets so the local and remote service instances can import the correct EVPN routes. Because the service is transported across the WAN, the BGP/EVPN instance must be associated with the MPLS transport tunnels toward the remote gateway, dcgw20. A VXLAN instance with a VNI is not configured in the 7750 SR VPLS 100 for this integrated WAN gateway service. The VXLAN/VNI mapping is used inside the SR Linux data center fabric where MAC-VRF services are transported over VXLAN. On the WAN side, the VPLS service is carried using MPLS/EVPN mechanisms, not a VXLAN VNI configured directly under the VPLS. Reference: integrated gateway DCI, L2 EVPN/VPLS interworking, EVI and route-target operation.
NEW QUESTION # 60
Consider the exhibit.
Leaf-1 has received an ARP request from host-1 for host-2. Leaf-1 has added host-1's MAC address in its MAC table and host-1's MAC/IP addresses in its proxy-ARP table.
Which of the following steps is FALSE?
Answer: A
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
When Leaf-1 receives an ARP request from Host-1, it learns the source MAC address in the local MAC table and learns the source IP/MAC binding in the proxy ARP table. For EVPN distribution, the relevant control-plane advertisement is an EVPN route type 2 MAC/IP advertisement containing Host-1's MAC and the actual host IP address, 192.168.100.1. This allows remote PEs to populate their EVPN-derived forwarding and proxy ARP state with the correct endpoint binding. Option A is false because advertising the host MAC with the IP address set to 0.0.0.0 does not represent the learned MAC/IP binding required for proxy ARP synchronization. A MAC-only RT-2 advertisement may exist in EVPN contexts, but the question specifically states that Leaf-1 has learned the MAC/IP binding through ARP and is distributing that information. Therefore, the valid advertisement must include the real host IP address. Remote PEs use the MAC/IP route to learn the endpoint, not an all-zero IP placeholder for this proxy ARP learning event. Reference: EVPN RT-2 MAC/IP advertisement, proxy ARP table population, endpoint synchronization.
NEW QUESTION # 61
Leaf routers are configured to support Layer 2 multi-homing all-active mode.
Which of the following statements is FALSE?
Answer: B
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
In all-active Layer 2 EVPN multi-homing, the host is typically dual-homed to two or more leaf routers using a LAG. The participating leaf routers must configure the LAG and associate it with the Ethernet Segment so EVPN can advertise the common ESI and apply aliasing, split-horizon, and DF procedures. If VLAN tagging is used for service separation, tagging must be configured on the LAG interface so that the correct subinterfaces can bind into the MAC-VRF and Ethernet Segment. Option C is false because it states that the LACP system-id-mac must uniquely identify each leaf router. In an all-active EVPN multihomed LAG, the opposite principle applies: from the host's LACP perspective, the multihomed leaf pair must appear as a single logical LACP system. That generally requires a shared LACP system ID or coordinated system MAC behavior across the participating PEs. If each leaf presented a unique LACP system identity, the host would treat them as separate LAG partners and the all-active bundle would not form correctly. Reference: all-active L2 EVPN multi-homing, LAG attachment, LACP system ID behavior, Ethernet Segment association.
NEW QUESTION # 62
......
Our product boosts many advantages and it is worthy for you to buy it. You can have a free download and tryout of our 4A0-D03 Exam torrents before purchasing. After you purchase our product you can download our 4A0-D03 study materials immediately. We will send our product by mails in 5-10 minutes. We provide free update and the discounts for the old client. If you have any doubts or questions you can contact us by mails or the online customer service personnel and we will solve your problem as quickly as we can.
4A0-D03 Positive Feedback: https://www.newpassleader.com/Nokia/4A0-D03-exam-preparation-materials.html
P.S. Free 2026 Nokia 4A0-D03 dumps are available on Google Drive shared by NewPassLeader: https://drive.google.com/open?id=1cdwSWe29zAWHMiueP61ecG1QDWNbGI0c