2026 Latest BraindumpStudy NSE6_EDR_AD-7.0 PDF Dumps and NSE6_EDR_AD-7.0 Exam Engine Free Share: https://drive.google.com/open?id=1goEBuoqJYXWXUYo2Z6hQgpoXD00AYkAk
Our NSE6_EDR_AD-7.0 training materials offer you everything you need to take the certification and face the challenge of professional knowledge points. The NSE6_EDR_AD-7.0 exam dumps are written and approved by our IT specialist based on the real questions of the formal test. Our latest learning materials contain the valid test questions and correct NSE6_EDR_AD-7.0 Test Answers along with detailed explanation. We will give your money back in full if you lose exam with our NSE6_EDR_AD-7.0 practice exam.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Monitoring and Troubleshooting | 10% | - Performance and issue diagnosis - Log and alert troubleshooting - System monitoring and health checks |
| Topic 2: Security Settings and Policies | 25% | - Playbooks creation and management - Communication control policies - Fortinet Cloud Service (FCS) integration - Security policies configuration |
| Topic 3: Integration and Security Fabric | 15% | - Fortinet Security Fabric integration - FortiXDR deployment and configuration |
| Topic 4: Events, Forensics, and Threat Hunting | 25% | - Threat hunting profiles and queries - Threat hunting data interpretation - Security event and alert analysis - Forensic analysis and incident investigation |
| Topic 5: FortiEDR System Architecture and Deployment | 25% | - Inventory management and system tools - Multi-tenancy deployment - Architecture and technical positioning - API-based management operations - Installation and deployment process |
>> Exam Dumps NSE6_EDR_AD-7.0 Collection <<
The certification is necessary to get a job in your desired Fortinet company. Success in the test gives you an edge over the others because you will have certified skills that will make a good impression on the interviewer. Most people preparing for the Fortinet NSE 6 - FortiEDR 7.0 Administrator (NSE6_EDR_AD-7.0) exam are confused about preparation. How will they get real and updated Fortinet NSE 6 - FortiEDR 7.0 Administrator (NSE6_EDR_AD-7.0) exam questions? In the case of studying with outdated Fortinet NSE 6 - FortiEDR 7.0 Administrator (NSE6_EDR_AD-7.0) practice questions, you will fail and lose your resources.
NEW QUESTION # 29
Refer to the exhibits.
You are attempting to move a collector into the High Security Collector Group for isolation but encounter an error in the API request as shown in the exhibit. To successfully isolate the collector, which API parameter must you correct? (Choose one answer)
Answer: D
Explanation:
The correct answer is A. Set the organization parameter to Default .
From the first exhibit, the API query result for the Collector shows:
* Collector name: Desktop-PC
* Collector group name: Engineering
* Organization: Default
* State: Running
But in the second exhibit, the API request is using:
* organization = Fortinet-Training
* collectors = Desktop-PC
* targetCollectorGroup = High Security Collector Group
That organization value is wrong. The Collector belongs to the Default organization, so the API request must reference the Collector's actual organization. Otherwise FortiEDR cannot locate or move that Collector under the organization specified in the request.
The FortiEDR guide confirms that Collector Groups are used to assign different FortiEDR policies to different Collectors, and that Collectors can be moved between groups/organizations in the Inventory workflow. In Hoster view, FortiEDR shows Collectors from all organizations and allows moving Collectors between organizations, but the organization context must match the Collector being managed.
Option B is wrong because the exhibit shows the API request is authorized; the failure is a 400 Bad Request , not an authentication failure. Option C is wrong because the endpoint shown is already a move/update operation using PUT, and the issue is not the HTTP method. Option D is wrong because Engineering is the current Collector Group. The goal is to move the Collector to High Security Collector Group , so changing the target back to Engineering would not isolate or harden the Collector.
=========
NEW QUESTION # 30
Refer to the Exhibit:
Based on the FortiEDR status output shown in the exhibit, what are two reasons for the degraded state?
(Choose two answers)
Answer: B,D
Explanation:
The correct answers are B and C .
The exhibit shows:
FortiEDR Service: Up
FortiEDR Driver: Up
FortiEDR Status: Degraded (no configuration)
This means the local Collector service and driver are running, but the Collector has not received valid configuration. In FortiEDR, a Collector must register and communicate with the FortiEDR Aggregator to receive its configuration. The guide states that the Collector initially sends registration information to the FortiEDR Aggregator using SSL, sends ongoing health/status/security-event information, and receives its configuration from the Aggregator.
During installation, a non-customized Windows Collector requires the correct Aggregator address , Aggregator port 8081 , and registration password . The guide explicitly states that the Aggregator port should be specified as 8081 , and that the registration password must be entered during installation.
Therefore, an incorrect registration password or incorrect port number can prevent proper registration
/configuration retrieval, resulting in a degraded/no-configuration state.
Option A is not the best answer because Windows Firewall being enabled by itself does not automatically cause this FortiEDR status; only if it blocks required FortiEDR communication would it matter, and the option is too generic. Option D is also not correct as written because the Collector receives configuration from the Aggregator , not directly from the Central Manager. The guide describes Collector-to-Aggregator communication for registration and configuration.
=========
NEW QUESTION # 31
Within the FortiEDR architecture, which component needs JumpBox capabilities to enable authenticated and controlled communication with FortiAnalyzer? (Choose one answer)
Answer: A
Explanation:
The correct answer is A. Core.
For FortiAnalyzer / FortiAnalyzer Cloud integration, the FortiEDR 7.0.0 Administration Guide states that one prerequisite is "A Jumpbox with connectivity to FortiAnalyzer." The same section says to refer to Setting up the FortiEDR Core for details about installing a FortiEDR Core and configuring it as a Jumpbox. In the connector configuration, the guide also states that the Jumpbox field is used to select the FortiEDR Jumpbox that will communicate with FortiAnalyzer or FortiAnalyzer Cloud.
So, the FortiEDR component associated with JumpBox capability is the Core. The Central Manager must have connectivity to Fortinet Cloud Services, but it is not the component configured as the JumpBox. The Aggregator handles registration, configuration, and monitoring between Collectors/Cores and Central Manager, and the Reputation Server is unrelated to FortiAnalyzer JumpBox communication in this context.
=========
NEW QUESTION # 32
Refer to the exhibit.
Based on the exhibit, which statement about this threat hunting query is true? (Choose one answer)
Answer: C
Explanation:
The correct answer is A .
The exhibit shows a FortiEDR Threat Hunting saved query using RemotePort:3389, scoped to a specific device, with Scheduled Query enabled, classification set to Suspicious , and a repeat interval of 15 minutes .
TCP port 3389 is the standard RDP port, so the query is designed to detect RDP-related network activity for the selected endpoint.
The FortiEDR guide states that saving a Threat Hunting query can define it as a scheduled query to automate threat detection. It further states that when a scheduled query runs and detects matches, a security event is automatically created in the Incidents tab , and notifications are sent according to the security event configuration.
Option B is too absolute and therefore wrong. The specific query shown uses a network field, but Threat Hunting itself can search activity events across files, registry, network, processes, and event logs. Option C is wrong because the Community Query checkbox is not selected, so it is not configured as a shared community
/global query. The guide states that Community Query must be selected to share the query with the FortiEDR community, including other organizations.
Option D is wrong because a scheduled Threat Hunting query generates an incident; it does not automatically block RDP unless additional playbook actions are configured. The guide says scheduled queries generate security events and may trigger configured playbook actions, but the query itself is not a blocking control.
=========
NEW QUESTION # 33
Refer to the exhibit.
Based on the threat hunting event details shown in the exhibit, which two statements about the event are true?
(Choose two answers)
Answer: C,D
Explanation:
The correct answers are B and D .
The exhibit shows a Process Creation activity event where cmd.exe is the source process and PING.EXE is the target process. The displayed Executing user is R2D2-KVM63\fortinet, and the command line shows fortinet.com, which means the user fortinet executed a ping command targeting fortinet.com.
The FortiEDR guide explains that Threat Hunting activity events consist of a source , an action , and a target
. It also states that Process Actions have another process as the target and include process-related actions such as Process Creation .
The exhibit also shows file-related details for the executable, including the executable path, product, SHA1 hash, and command line. In FortiEDR Threat Hunting, process execution events are tied to executable-file metadata, so the event is associated with the executable file involved in the process action. This supports B in the exam's intended wording.
Option A is not reliable because the screenshot does not prove MITRE details are unavailable; it only shows that no MITRE detail is visible in the current portion of the details pane. The guide states that MITRE indications appear when an activity event has related MITRE information.
Option C is wrong because the screenshot shows the process status as Running and does not show a block indicator. A green check does not mean blocked; it indicates a trusted/signed/allowed status context. There is no evidence that PING.EXE was blocked.
NEW QUESTION # 34
......
According to the statistic about candidates, we find that some of them take part in the NSE6_EDR_AD-7.0 exam for the first time. Considering the inexperience of most candidates, we provide some free trail for our customers to have a basic knowledge of the NSE6_EDR_AD-7.0 exam guide and get the hang of how to achieve the NSE6_EDR_AD-7.0 exam certification in their first attempt. We also welcome the suggestions from our customers, as long as our clients propose rationally. We will adopt and consider it into the renovation of the NSE6_EDR_AD-7.0 Exam Guide. Anyway, after your payment, you can enjoy the one-year free update service with our guarantee.
Fresh NSE6_EDR_AD-7.0 Dumps: https://www.braindumpstudy.com/NSE6_EDR_AD-7.0_braindumps.html
P.S. Free 2026 Fortinet NSE6_EDR_AD-7.0 dumps are available on Google Drive shared by BraindumpStudy: https://drive.google.com/open?id=1goEBuoqJYXWXUYo2Z6hQgpoXD00AYkAk