P.S. Free & New 350-101 dumps are available on Google Drive shared by BraindumpsPass: https://drive.google.com/open?id=1Ey_T3y9w7rJYZSx4yeuJp9WKfASy0MqM
Pass the Implementing and Operating Cisco Wireless Core Technologies 350-101 certification exam which is a challenging task. To make 350-101 exam success journey simple, quick, and smart, you have to prepare well and show a firm commitment to passing this exam. The real, updated, and error-free Implementing and Operating Cisco Wireless Core Technologies 350-101 Exam Dumps are available over the BraindumpsPass.
| Section | Weight | Objectives |
|---|---|---|
| 802.11 Technology Fundamentals | 20% | - Wireless standards and operations
|
| RF Fundamentals | 15% | - RF characteristics
|
| Wireless Monitoring and Management | 25% | - Monitoring and troubleshooting
|
| Automation and AI | 10% | - Automation technologies
|
| Wireless Client Connectivity | 30% | - Client access and security
|
If you are going to buy 350-101 learning materials online, and concern the privacy protection, you can choose us. We respect private information of you. If you choose us, your private information will be protected well. Once the order finishes, your personal information such as your name and email address will be concealed. Moreover, 350-101 Exam Materials contain both questions and answers, and itโs convenient for you to have a check after practicing. We offer you free update for one year for 350-101 training materials, and the update version will be sent to your email address automatically.
NEW QUESTION # 98
A business requires a Cisco 9163E AP to act as a point-to-point connection between two buildings on campus.
No wired connection is available between the sites, and the AP must relay network traffic across the wireless link. The administrator must ensure that the AP is configured to forward Ethernet frames between its radio and Ethernet interfaces. Which CLI command must the administrator use to configure the AP for this application?
Answer: D
Explanation:
In point-to-point wireless deployments, the AP must act as a transparent bridge, forwarding Ethernet frames between the wired network interface and the wireless radio. The correct configuration command in Cisco IOS XE for a Cisco 9163E AP isap name < ap_name > mode bridge. This sets the AP into bridge mode, allowing it to function as a Layer 2 relay between the two connected sites, effectively extending the Ethernet network over the wireless link. Option A, FlexConnect mode, is intended for APs to locally switch client traffic while maintaining CAPWAP control connectivity, not for bridging traffic between networks. Option B,capwap mode p2p, is not valid syntax in IOS XE; CAPWAP does not provide a dedicated P2P mode for Ethernet bridging. Option D,capwap mode mesh, configures the AP for mesh networking, which is for multi-hop client coverage rather than a direct point-to-point bridge. Cisco Wireless Core Technologies recommend bridge mode for point-to-point wireless links to maintain transparent forwarding, support VLAN tagging, and ensure seamless Layer 2 connectivity between remote buildings, which is essential for applications like IP telephony, security cameras, and campus LAN extension. Reference topics:Wireless Network Implementation - Bridge mode, point-to-point AP, Layer 2 traffic forwarding, Cisco 9163E configuration.
NEW QUESTION # 99
Which result is produced using a power ratio of 10:1 in standard decibel calculations?
Answer: C
Explanation:
In decibel calculations, the formula used to convert a power ratio to decibels (dB) is:
Thus, the power ratio of 10:1 corresponds to a 10 dB change in power.
Option A: -20 dB would correspond to a ratio of 0.01:1, not 10:1.
Option B: 5 dB would correspond to a power ratio of approximately 3.16:1, not 10:1.
Option D: 15 dB would correspond to a ratio of 31.62:1, not 10:1.
Therefore, Option C: 10 dB is the correct answer, as it is the result of a power ratio of 10:1.
NEW QUESTION # 100
Refer to the exhibit. A client authenticates via 802.1X against an ISE server that is configured to return a specific VLAN ID (VLAN 100) via an attribute value pair. However, the administrator notices that the client is placed in the wrong VLAN (VLAN 50). What must the administrator implement to resolve the issue?
Answer: A
Explanation:
In this scenario, the client is placed in the wrong VLAN (VLAN 50) even though the ISE server is configured to assign VLAN 100. The key part of the issue is that the VLAN assignment returned by ISE is not being applied correctly.
Option A: "Configure the policy profile to allow ISE to override the VLAN." This is the correct answer. The policy profile on the Wireless LAN Controller (WLC) should be configured to allow the ISE server's VLAN assignment to override the locally configured VLAN settings on the WLC.
Without this, the WLC might default to its pre-configured VLAN (VLAN 50) instead of the VLAN assigned by ISE (VLAN 100).
NEW QUESTION # 101
An onsite engineer is working to connect devices to the wireless network using central switching in a corporate environment. Security protocols and network-specific settings must be configured as per enterprise policy. After the initial wireless settings are applied on an iOS tablet, the engineer must ensure that VLAN ID
10 is assigned on the client device to complete a successful enterprise Wi-Fi connection. Which action meets this requirement?
Answer: D
Explanation:
In a centrally switched deployment, the WLAN traffic is tunneled via CAPWAP from the AP to the WLC, where VLAN assignment occurs. To ensure that client devices are placed into the correct VLAN (in this case, VLAN 10), the WLAN policy profile must define the VLAN mapping. This allows the WLC to tag client traffic appropriately when forwarding to the upstream switch. Option C is correct because it configures the WLAN profile (policy profile) with VLAN 10, ensuring all clients associating with the WLAN are mapped to the proper VLAN automatically. Option A is incorrect because VLAN tagging is managed centrally on the WLC, and access ports at the AP are typically trunked or transparent in central switching mode. Option B is invalid; manually configuring VLAN on client devices is not feasible or scalable in enterprise deployments and does not integrate with CAPWAP central switching. Option D is also incorrect; relying on MAC-based redirection introduces complexity and is not standard practice for VLAN assignment in centrally switched networks. Cisco Wireless Core Technologies recommend using policy profiles to centrally enforce VLANs, simplifying management, ensuring security compliance, and supporting consistent enterprise Wi-Fi connectivity. Reference topics:Client Connectivity Configuration - VLAN assignment, WLAN policy profiles, centrally switched deployments, Cisco Catalyst 9800 WLC.
NEW QUESTION # 102
A school district is deploying Cisco Catalyst 9176 APs to remote sites with occasional WAN outages. The IT team wants the APs to attempt joining a secondary or tertiary Catalyst 9800 WLC if the primary controller is unreachable. The team must preconfigure all controller IP addresses using the AP CLI before deploying.
Which set of CLI commands sets the primary, secondary, and tertiary controller IP addresses on a Catalyst
9176 AP?
Answer: C
Explanation:
Cisco lightweight and Catalyst access points use CAPWAP for AP-to-controller discovery and join operations. For AP-side preconfiguration, Cisco documents the syntax as capwap ap {primary-base | secondary-base | tertiary-base} controller-name controller-ip-address, specifically for configuring primary, secondary, and tertiary controllers on the AP. This matches option B exactly because it includes the CAPWAP AP command, the controller priority keyword, the controller name, and the controller management IP address. (Cisco) The Catalyst 9800 AP join process also recognizes these configured controller entries in priority order:
primary controller using capwap ap primary-base, secondary controller using capwap ap secondary-base, and tertiary controller using capwap ap tertiary-base. (Cisco) This allows the AP to attempt a backup controller when the preferred controller is unavailable, which is appropriate for remote sites with intermittent WAN reachability. Option A uses obsolete or invalid setcontroller syntax. Option C invents an ap join command format. Option D incorrectly inserts wlc into the AP CAPWAP command. Reference topics:Wireless Network Implementation -CAPWAP discovery, AP join process, Catalyst 9800 controller redundancy, and AP CLI provisioning.
NEW QUESTION # 103
......
You may urgently need to attend 350-101 certificate exam and get the certificate to prove you are qualified for the job in some area. But what certificate is valuable and useful and can help you a lot? Passing the test certification can help you prove that you are competent in some area and if you buy our 350-101 Study Materials you will pass the test almost without any problems. with a high pass rate as 98% to 100%, our 350-101 learning guide can be your best assistant on your way to success.
350-101 Exam Success: https://www.braindumpspass.com/Cisco/350-101-practice-exam-dumps.html
BONUS!!! Download part of BraindumpsPass 350-101 dumps for free: https://drive.google.com/open?id=1Ey_T3y9w7rJYZSx4yeuJp9WKfASy0MqM