2026 Pass4Test 최신 EDGE-Expert PDF 버전 시험 문제집과 EDGE-Expert 시험 문제 및 답변 무료 공유: https://drive.google.com/open?id=17rmdJAc9eMz6aviIL5JIfv7n_LnaZQZz
EDGE EDGE-Expert 인증시험 최신버전덤프만 마련하시면EDGE EDGE-Expert시험패스는 바로 눈앞에 있습니다. 주문하시면 바로 사이트에서 pdf파일을 다운받을수 있습니다. EDGE EDGE-Expert 덤프의 pdf버전은 인쇄 가능한 버전이라 공부하기도 편합니다. EDGE EDGE-Expert 덤프샘플문제를 다운받은후 굳게 믿고 주문해보세요. 궁금한 점이 있으시면 온라인서비스나 메일로 상담받으시면 됩니다.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Financial & Results Analysis | 10% | - Results and outputs of EDGE
|
| Topic 2: Software & Methodology | 25% | - Climate Zones & Weather Data
|
| Topic 3: Energy Efficiency | 25% | - HVAC Systems
|
| Topic 4: Water Efficiency & Materials | 25% | - Materials Embodied Energy (EE)
|
| Topic 5: EDGE System Overview | 15% | - Understanding the EDGE Standard
|
>> EDGE-Expert퍼펙트 최신버전 덤프샘플 <<
EDGE인증 EDGE-Expert시험을 패스하여 자격증을 취득하여 승진이나 이직을 꿈구고 있는 분이신가요? 이 글을 읽게 된다면EDGE인증 EDGE-Expert시험패스를 위해 공부자료를 마련하고 싶은 마음이 크다는것을 알고 있어 시장에서 가장 저렴하고 가장 최신버전의 EDGE인증 EDGE-Expert덤프자료를 강추해드립니다. 높은 시험패스율을 자랑하고 있는EDGE인증 EDGE-Expert덤프는 여러분이 승진으로 향해 달리는 길에 날개를 펼쳐드립니다.자격증을 하루 빨리 취득하여 승진꿈을 이루세요.
질문 # 49
A Client is developing two identical hotels in different cities but finds that the energy intensity (kWh/m²/year) of the hotels are different. Which of the following difference in these two cities could have caused this?
정답：A
설명：
In the EDGE methodology, the baseline and improved-case energy calculations are highly dependent on local climate conditions because climate directly affects heating and cooling demands. Even if two hotels are identical in design, construction, and systems, their modeled energy intensity can differ if they are located in cities with different temperature profiles, humidity levels, solar radiation, and seasonal variations. In hotter or more humid climates, cooling loads and dehumidification energy increase; in colder climates, heating loads increase. EDGE uses location-specific weather data to determine these loads, which then influences the annual delivered energy consumption expressed in kWh per square meter per year.
Electricity prices do not affect energy intensity because kWh/m²/year is a consumption metric, not a cost metric. Cost of materials may influence project budgeting and material choices, but it does not directly change the operational energy calculation unless it results in different envelope performance, which the question states is identical. Availability of fresh water affects water strategy decisions and water consumption, not energy intensity. Therefore, the difference most directly responsible for differing energy intensities in EDGE for identical hotels in different cities is climate.
질문 # 50
For which of the following is EDGE Advanced certification available?
정답：B
설명：
The EDGE Standard defines specific project types eligible for certification levels, including EDGE Advanced, which requires at least 40% energy savings. The EDGE Certification Protocol specifies: "EDGE Advanced certification is available for new constructions that achieve a minimum of 40% energy savings compared to the base case, applicable to building typologies such as homes, hotels, offices, hospitals, retail, and schools" (EDGE Certification Protocol, Section 2.3: Certification Levels). Option A, new constructions, aligns with this scope, as EDGE focuses on new buildings across supported typologies. Option B, green lease agreements, is not a building type and is outside EDGE's certification framework. Option C, infrastructure constructions, and Option D, parks and landscape projects, are also not covered under EDGE typologies, as confirmed by the EDGE User Guide: "EDGE certification applies to new buildings and major renovations of specific typologies, excluding infrastructure or landscape-only projects" (EDGE User Guide, Section 1.2:
Scope of EDGE Certification). Thus, only new constructions qualify for EDGE Advanced certification.
Reference:EDGE Certification Protocol, Section 2.3: Certification Levels; EDGE User Guide Version 2.1, Section 1.2: Scope of EDGE Certification.
질문 # 51
Utility cost savings are calculated based on reduction in total:
정답：D
설명：
Utility cost savings in EDGE are calculated based on reductions in resource consumption sourced from the supply grid, as these are the costs directly borne by the building owner. The EDGE User Guide explains:
"Utility cost savings in EDGE are calculated based on the reduction in energy and water consumption from the supply grid, using local tariffs for electricity and water to convert resource savings into financial savings" (EDGE User Guide, Section 2.4: Interpreting EDGE Results). Option D, energy and water consumption from the supply grid, aligns with this definition, focusing on grid-supplied resources. Option A (electricity and water consumption) is partially correct but lacks specificity about the source: "Electricity and water must be grid-supplied to be included in utility cost savings; onsite generation is excluded" (EDGE Methodology Report Version 2.0, Section 4.4: Cost Savings Calculations). Option B (generator fuel and water consumption) is incorrect, as generator fuel is not part of utility cost savings: "Generator fuel costs are not included in utility savings, as EDGE focuses on grid-supplied utilities" (EDGE User Guide, Section 2.4:
Interpreting EDGE Results). Option C (building energy and water consumption) is too broad, including onsite sources: "Building consumption includes all sources, but utility savings are grid-specific" (EDGE Methodology Report Version 2.0, Section 4.4: Cost Savings Calculations). Thus, energy and water from the supply grid (Option D) is the correct basis for utility cost savings.
Reference: EDGE User Guide Version 2.1, Section 2.4: Interpreting EDGE Results; EDGE Methodology Report Version 2.0, Section 4.4: Cost Savings Calculations.
질문 # 52
Which of the following must be included in the EDGE Auditor submission for Preliminary Certification?
정답：B
설명：
The EDGE Auditor's submission for Preliminary Certification (design stage) must include specific elements to support the recommendation for certification. The EDGE Certification Protocol specifies: "For Preliminary Certification, the EDGE Auditor's submission must include compliance documents for the selected measures, such as drawings, specifications, and manufacturer's data sheets, which verify that the design aligns with the self-assessment in the EDGE software. These documents are reviewed by the Certification Provider to confirm eligibility" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option C, compliance documents for selected measures, directly matches this requirement. Option A (all available design data) is too broad and not required: "Only documents directly related to the selected measures are needed, not all design data" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option B (Chapter 5 EDGE certification protocol) is incorrect, as this refers to the protocol document itself, not a submission component:
"The certification protocol is a reference, not part of the Auditor's submission" (EDGE Certification Protocol, Section 1.1: Overview). Option D (design audit site visit results) is incorrect, as site visits are not required at the design stage: "Preliminary Certification is based on a desk audit, not a site visit, which occurs at the post- construction stage" (EDGE Certification Protocol, Section 3.3: Certification Decision). Thus, compliance documents (Option C) are required in the submission.
Reference:EDGE Certification Protocol, Section 3.2: Audit Requirements, Section 3.3: Certification Decision, Section 1.1: Overview.
질문 # 53
Which of the following is NOT a characteristic of the EDGE standard?
정답：D
설명：
The EDGE standard is designed to be a practical, focused tool for green building certification, emphasizing specific resource efficiency metrics. The EDGE User Guide describes its characteristics: "EDGE is a simple, fast, and smart tool for green building certification. It provides an intuitive interface with a powerful engine that accounts for local climate and building use (simple), identifies measures with the best return on investment (fast), and displays capital costs and payback periods (smart)" (EDGE User Guide, Section 1.1:
Introduction to EDGE). Options A, C, and D align with these descriptions. However, Option B (holistic approach that takes into account wider sustainability issues) is not a characteristic of EDGE, as the standard focuses narrowly on energy, water, and embodied energy in materials, not broader sustainability issues like biodiversity or social equity. This is clarified in the EDGE Certification Protocol: "EDGE is not a holistic sustainability standard; it specifically targets resource efficiency in energy, water, and materials, excluding wider sustainability metrics such as indoor air quality or ecological impact" (EDGE Certification Protocol, Section 1.2: Scope of EDGE Standard). Thus, Option B is not a characteristic of the EDGE standard.
Reference: EDGE User Guide Version 2.1, Section 1.1: Introduction to EDGE; EDGE Certification Protocol, Section 1.2: Scope of EDGE Standard.
질문 # 54
......
Pass4Test는 많은 분들이 EDGE EDGE-Expert인증시험을 응시하여 성공하도록 도와주는 사이트입니다. Pass4Test 의 EDGE-Expert덤프는 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다. 거의 100%의 정확도를 자랑하고 있습니다. 아마 많은 유사한 사이트들도 많습니다. 이러한 사이트에서 학습가이드와 온라인서비스도 지원되고 있습니다만 Pass4Test 는 이미 이러한 EDGE-Expert 사이트를 뛰어넘은 실력으로 업계에서 우리만의 이미지를 지키고 있습니다. Pass4Test 는 정확한 문제와 답만 제공하고 또한 그 어느 사이트보다도 빠른 업데이트로 여러분의 인증시험을 안전하게 패스하도록 합니다.
EDGE-Expert최고품질 덤프공부자료: https://www.pass4test.net/EDGE-Expert.html
그 외, Pass4Test EDGE-Expert 시험 문제집 일부가 지금은 무료입니다: https://drive.google.com/open?id=17rmdJAc9eMz6aviIL5JIfv7n_LnaZQZz