We also update frequently to guarantee that the client can get more learning H35-581_V2.0 exam resources and follow the trend of the times. So if you use our H35-581_V2.0 study materials you will pass the test with high success probability. And our H35-581_V2.0 learning guide is high-effective. If you study with our H35-581_V2.0 practice engine for 20 to 30 hours, then you can pass the exam with confidence and achieve the certification as well.
| Section | Objectives |
|---|---|
| Topic 1: Troubleshooting and Performance Enhancement | - Fault diagnosis in 5G networks - Performance tuning methods |
| Topic 2: Radio Network Planning | - Capacity planning - Coverage planning - Site selection and dimensioning |
| Topic 3: 5G Radio Network Fundamentals | - 5G NR system architecture and principles - Radio access network basics |
| Topic 4: Radio Network Optimization | - Interference analysis and mitigation - KPI analysis and optimization - Mobility optimization |
>> Test H35-581_V2.0 Pass4sure <<
Getting tired of humdrum life, you may want to get some successful feeling or try something different instead. We all know that is of important to pass the H35-581_V2.0 exam and get the H35-581_V2.0 certification for someone who wants to find a good job in internet area, and it is not a simple thing to prepare for exam. So you are in the right place now. The H35-581_V2.0 practice materials are a great beginning to prepare your exam. Actually, just think of our Huawei practice materials as the best way to pass the exam is myopic. They can not only achieve this, but ingeniously help you remember more content at the same time.
NEW QUESTION # 44
Which of the following 5GC modules connects to IMS?
Answer: A
Explanation:
The User Plane Function (UPF) is the 5G Core component that provides user-plane connectivity between PDU sessions and external Data Networks (DNs), including the IP Multimedia Subsystem (IMS).
IMS supplies multimedia communication services such as voice and video sessions using IP-based signaling and media transport.
In a 5G Standalone deployment, a UE can establish an IMS PDU session to access IMS services, including Voice over NR (VoNR).
The UPF processes user-plane packets associated with the PDU session and forwards traffic toward the appropriate external data network through the N6 interface.
For IMS services, this connectivity enables Session Initiation Protocol (SIP) signaling to reach relevant IMS components, such as the Proxy Call Session Control Function (P-CSCF).
The UPF also forwards media traffic according to the established packet-handling and forwarding rules.
The other functions serve different purposes.
AMF manages UE registration, access, and mobility procedures.
SMF controls PDU sessions, selects and configures UPFs, and manages applicable session-related QoS rules.
UDM manages subscription information and supports user-data services.
Although the SMF participates in establishing connectivity and policy enforcement, the UPF provides the actual user-plane path toward IMS.
Therefore, option A is correct.
Official Reference: 3GPP TS 23.501, Sections 4.2 and 6.2.3, 5G System Architecture and User Plane Function ; TS 23.228, Annex Y.9.2, IMS Services Architecture .
NEW QUESTION # 45
Which of the following represents an availability KPI in NR system performance measurement?
Answer: A
Explanation:
Radio network unavailability rate is the correct answer because it measures the proportion of time during which a radio-network resource or service is unavailable for normal operation.
In NR performance management, Key Performance Indicators (KPIs) are classified according to the network characteristics they evaluate, including availability, accessibility, retainability, mobility, resource utilization, and traffic performance.
Availability KPIs assess whether network resources remain operational and capable of providing their intended services during the measurement period.
The radio network unavailability rate can be expressed conceptually as the ratio of accumulated unavailable time to the applicable observation period.
A lower unavailability rate indicates better network availability.
The remaining options represent different performance categories.
PRB usage measures the utilization of Physical Resource Blocks and is primarily a radio-resource utilization indicator.
Average cell throughput measures the rate at which data is successfully transferred during the relevant measurement interval, making it a capacity or throughput indicator.
Uplink/downlink traffic volume measures the amount of data carried by the network over a defined period.
Unlike these traffic and utilization indicators, radio network unavailability directly characterizes operational service availability.
Therefore, option C is the appropriate availability KPI.
Official Reference: 3GPP TS 28.554, Section 6.10.1, Availability KPI , including Cell Availability and Radio Access Network Availability; TS 28.552, 5G Performance Measurements .
NEW QUESTION # 46
Which of the following statements regarding throughput-related indicators is incorrect?
Answer: C
Explanation:
Option A is incorrect under the standardized burst-based throughput measurement methodology because including the final small transmission interval can distort the measured throughput.
In NR performance management, throughput measurements are intended to represent radio transmission performance rather than the average application traffic rate across periods containing idle time.
The relevant measurement procedure distinguishes intervals during which the transmission buffer contains data from intervals when the buffer becomes empty.
The final transmission interval of a data burst may carry only a small residual packet. Including its duration and data volume can introduce a packet-size-dependent effect into the calculated throughput.
3GPP TS 28.554 therefore defines an extended throughput measurement method that excludes the final slot of the burst from the applicable calculation.
Option B is correct because average uplink and downlink UE throughput are used to assess radio-network performance as experienced by users.
Option C describes the general relationship between transmitted data volume and applicable active transmission time, subject to the precise measurement definitions.
Option D expresses a comparable throughput relationship at cell level, although its wording is less precise than the standardized KPI definitions.
Therefore, option A contradicts the specified throughput methodology.
Official Reference: 3GPP TS 28.554, Section 6.3.6.2, Extended Definition of Throughput , Figure 1; TS
28.552, 5G Performance Measurements .
NEW QUESTION # 47
When multiple slices exist in the 5GC, which of the following modules is responsible for selecting a slice?
Answer: A
Explanation:
The Network Slice Selection Function (NSSF) is the dedicated 5G Core network function responsible for supporting network-slice selection.
Network slicing enables operators to create multiple logical networks on common infrastructure, allowing differentiated service capabilities for enhanced Mobile Broadband (eMBB), Ultra-Reliable Low-Latency Communications (URLLC), and massive Machine-Type Communications (mMTC).
Each network slice is identified using Single Network Slice Selection Assistance Information (S-NSSAI), consisting of a Slice/Service Type (SST) and an optional Slice Differentiator (SD).
During UE registration, the Access and Mobility Management Function (AMF) processes the requested slice information and may interact with the NSSF through the Nnssf service-based interface.
The NSSF assists with determining the Allowed NSSAI, identifying suitable network-slice instances, and determining appropriate AMF sets for the requested slices.
The remaining network functions have distinct responsibilities.
AMF manages UE registration, access authorization coordination, and mobility management. Although it participates in slice-selection procedures, it is not the dedicated slice-selection function.
NRF provides network-function registration and discovery services.
NEF securely exposes network capabilities and events to authorized external applications.
Therefore, NSSF is the correct answer because network-slice selection is explicitly included in its standardized functional responsibilities.
Official Reference: 3GPP TS 23.501, Sections 5.15 and 6.2.14, Network Slicing and NSSF Functionality .
NEW QUESTION # 48
For a Huawei base station, when the PDCCH rate-matching function is disabled, the PDCCH occupies the full bandwidth in the frequency domain.
Answer: A
Explanation:
The intended answer is True, based on the behavior described for Huawei's rate-matching-pattern- configuration-based PDCCH resource-management feature.
The Physical Downlink Control Channel (PDCCH) carries Downlink Control Information (DCI), including uplink grants, downlink scheduling assignments, and relevant control indications.
In standardized NR operation, PDCCH transmission resources are organized through Control Resource Sets (CORESETs).
A CORESET defines the applicable frequency-domain resources and time-domain duration for PDCCH monitoring and transmission.
Huawei's feature description distinguishes between operation with the specified PDCCH rate-matching function enabled and disabled.
When the feature is disabled, the documented Huawei implementation allows the PDCCH frequency-domain resource arrangement to extend across the configured cell bandwidth.
When the feature is enabled, the available PDCCH frequency-domain resource range may be restricted according to the corresponding configuration parameters.
This capability can be used to manage control-channel resource allocation and coordinate resource utilization with scheduled data transmissions.
However, the description must not be interpreted as stating that every individual PDCCH transmission occupies every Resource Block in the cell.
Actual PDCCH transmission remains governed by the applicable CORESET configuration, aggregation level, and Control Channel Element (CCE) allocation.
Therefore, option A is the intended Huawei implementation-specific answer.
Official Reference: Huawei, 5G RAN Channel Management Feature Parameter Description , Section 5, PDCCH Channel Management - PDCCH Frequency-Domain Resource Range ; 3GPP TS 38.211, Section
7.3.2, Physical Downlink Control Channel .
Technical warning / qualification: The Huawei-authored feature description supports this expected behavior, but an independently authenticated copy from Huawei's official documentation portal for the precise H35-581 V2.0 software release was not established. The answer must remain vendor-version-qualified rather than universally applicable to all NR base stations.
NEW QUESTION # 49
......
We can say that how many the H35-581_V2.0 certifications you get and obtain qualification certificates, to some extent determines your future employment and development, as a result, the H35-581_V2.0 exam guide is committed to helping you become a competitive workforce, let you have no trouble back at home. Actually, just think of our H35-581_V2.0 Test Prep as the best way to pass the exam is myopic. They can not only achieve this, but ingeniously help you remember more content at the same time.
New H35-581_V2.0 Exam Answers: https://www.exam4docs.com/H35-581_V2.0-study-questions.html