BTW, DOWNLOAD part of ActualCollection NSE4_FGT_AD-7.6 dumps from Cloud Storage: https://drive.google.com/open?id=1IgAx4B4wDe0S7hehngk5YCmkaSVWUamS
In the 21 Century, the NSE4_FGT_AD-7.6 certification became more and more recognized in the society because it represented the certain ability of examinees. However, in order to obtain NSE4_FGT_AD-7.6 certification, you have to spend a lot of time preparing for the NSE4_FGT_AD-7.6 Exam. Many people gave up because of all kinds of difficulties before the examination, and finally lost the opportunity to enhance their self-worth. As a thriving multinational company, we are always committed to solving this problem.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
>> Exam NSE4_FGT_AD-7.6 Question <<
As the authoritative provider of NSE4_FGT_AD-7.6 guide training, we can guarantee a high pass rate compared with peers, which is also proved by practice. Our good reputation is your motivation to choose our learning materials. We guarantee that if you under the guidance of our NSE4_FGT_AD-7.6 study tool step by step you will pass the exam without a doubt and get a certificate. Our learning materials are carefully compiled over many years of practical effort and are adaptable to the needs of the exam. We firmly believe that you cannot be an exception. Choosing our NSE4_FGT_AD-7.6 Exam Questions actually means that you will have more opportunities to be promoted in the near future. If you eventually fail the exam, we will refund the fee by the contract. We are confident that in the future, our NSE4_FGT_AD-7.6 study tool will be more attractive and the pass rate will be further enhanced.
NEW QUESTION # 62
Refer to the exhibit.
A network administrator is troubleshooting an IPsec tunnel between two FortiGate devices. The administrator has determined that phase 1 status is up, but phase 2 fails to come up.
Based on the phase 2 configuration shown in the exhibit, which two configuration changes will bring phase 2 up? (Choose two.)
Answer: A,C
Explanation:
Phase 1 being up confirms the two FortiGate devices can authenticate and build the IKE SA. Phase 2 failing indicates the IPsec (Quick Mode) SA negotiation is failing due to mismatched Phase 2 parameters.
From the exhibit, the Phase 2 mismatches that would prevent SA establishment are:
1) Phase 2 selectors must mirror each other (Proxy IDs)
HQ-NGFW Phase 2 selector shows:
Local: 10.0.11.0/24
Remote: 172.20.1.0/24
BR1-FGT Phase 2 selector shows:
Local: 172.20.1.0/24
Remote: 10.11.0.0/24 β΅ does not match HQ's local subnet (10.0.11.0/24)
In FortiOS, Phase 2 comes up only when the peers' selectors (proxy IDs) match as opposite pairs (local on one side = remote on the other).
β
Fix: A. On BR1-FGT, set Remote Address to 10.0.11.0/255.255.255.0.
2) Phase 2 proposal must match (encryption/authentication)
HQ-NGFW shows encryption AES128 (with SHA1)
BR1-FGT shows encryption AES256 (with SHA1)
For Phase 2 to establish, both peers must have at least one common proposal (same encryption and authentication settings). With one side set to AES128 and the other to AES256, there is no match.
β
Fix: D. On HQ-NGFW, set Encryption to AES256.
Why the other options are not correct
B . Enable Diffie-Hellman Group 2: The exhibit's mismatch is not resolved by adding DH group 2, and DH group must match when PFS is enabled. This option does not align the peers based on what's shown.
C . Set Seconds to 43200: Phase 2 lifetime mismatches typically do not prevent Phase 2 from coming up (the negotiated lifetime can be adjusted by the peers). The hard blockers here are the selectors and proposal mismatch.
NEW QUESTION # 63
Which method allows management access to the FortiGate CLI without network connectivity?
Answer: A
Explanation:
The serial console provides direct physical access to the FortiGate CLI without requiring any network connectivity. It connects via the FortiGate's console port using a serial cable, allowing administrators to perform initial configuration, recovery, or troubleshooting even if the network interfaces are down or misconfigured.
NEW QUESTION # 64
Refer to the exhibit. An administrator has configured an Application Overrides for the ABC.Com application signature and set the Action to Allow. This application control profile is then applied to a firewall policy that is scanning all outbound traffic. Logging is enabled in the firewall policy. To test the configuration, the administrator accessed the ABC.Com web site several times.
Why are there no logs generated under security logs for ABC.Com?
Answer: B
Explanation:
When the action is set to Allow in an application override, traffic matching this override is allowed without generating security logs because it bypasses deeper inspection and blocking.
NEW QUESTION # 65
Refer to the exhibits.
An administrator has observed the performance status outputs on an HA cluster for 55 seconds.
Which FortiGate is the primary?
Answer: A
Explanation:
From the HA configuration shown for HQ-NGFW-1:
set memory-based-failover enable
set memory-failover-threshold 70
set memory-failover-monitor-period 50
set memory-failover-sample-rate 10
set memory-failover-flip-timeout 60
set override disable
set priority 200
From the performance status outputs:
HQ-NGFW-1 memory used is 90% (well above the configured threshold of 70%) HQ-NGFW-2 memory used is about 48.7% (well below the threshold) What happens in FortiOS 7.6 with memory-based failover When memory-based failover is enabled, FortiGate monitors memory utilization. If the unit's memory usage stays above the configured memory-failover-threshold for the configured memory-failover-monitor-period, the cluster triggers a failover away from the unit under memory pressure.
Threshold = 70%
HQ-NGFW-1 is at 90%, so it violates the threshold.
Monitor period = 50 seconds.
The administrator observed for 55 seconds, which is longer than 50 seconds, so the condition is met for long enough to trigger failover.
The memory-failover-flip-timeout 60 is used to prevent rapid back-and-forth role changes (flapping) after a failover decision; it does not prevent the initial failover from occurring once the threshold breach persists for the monitor period.
NEW QUESTION # 66
Refer to the exhibits. The exhibits show a diagram of a FortiGate device connected to the network, and the firewall policies, VIP, and IP pool configurations on the FortiGate device.
The WAN (port2) interface has the IP address 100.65.0.101/24.
The LAN (port4) interface has the IP address 10.0.11.254/24.
The first firewall policy has NAT enabled using the IP pool. The second firewall policy is configured with a VIP as the destination address.
Which IP address will be used to source NAT (SNAT) the internet traffic coming from a workstation with the IP address 10.0.11.50?
Answer: C
Explanation:
Traffic from the workstation 10.0.11.50 going to the internet matches the Internet(1) policy (LAN
β WAN) which has NAT enabled and is configured to use the IP Pool. The IP pool specifies the external address 100.65.0.102.
FortiGate will perform source NAT (SNAT) on the outbound traffic, translating the source IP of the workstation to 100.65.0.102.
NEW QUESTION # 67
......
At present, many office workers are dedicated to improving themselves. Most of them make use of their spare time to study our NSE4_FGT_AD-7.6 study materials. As you can see, it is important to update your skills in company. After all, the most outstanding worker can get promotion. You also need to plan for your future. Getting the NSE4_FGT_AD-7.6 Study Materials will enhance your ability. Also, various good jobs are waiting for you choose. Your life will become wonderful if you accept our guidance.
Official NSE4_FGT_AD-7.6 Study Guide: https://www.actualcollection.com/NSE4_FGT_AD-7.6-exam-questions.html
2026 Latest ActualCollection NSE4_FGT_AD-7.6 PDF Dumps and NSE4_FGT_AD-7.6 Exam Engine Free Share: https://drive.google.com/open?id=1IgAx4B4wDe0S7hehngk5YCmkaSVWUamS