お客様に自分に一番ふさわしいInternational Code Councilの93-Tall-Mass-Timber-Buildings試験の復習方式を提供するために、我々はInternational Code Councilの93-Tall-Mass-Timber-Buildingsの資料の3つのバーションを提供します。PDF、オンライン版とソフト版です。あなたの試験準備にヘルプを提供するのは常にあります。すべてのバーションは無料のデモを提供します。そのほかに、どのバーションでも全面的で最新版のInternational Code Councilの93-Tall-Mass-Timber-Buildingsの資料を提供します。
| Section | Objectives |
|---|---|
| Topic 1: Tall Mass Timber Building Code Provisions | - International Building Code requirements for tall mass timber construction - Mass timber materials and construction requirements - Types IV-A, IV-B and IV-C construction |
| Topic 2: Fire Protection and Fire-Resistance | - Fire-resistance requirements - Fire protection systems and related provisions - Noncombustible protection and protection of mass timber elements |
| Topic 3: Special Inspection Requirements | - Inspector duties and responsibilities - Special inspection procedures for tall mass timber buildings - Inspection of connections and protective materials |
| Topic 4: Construction Fire Safety | - International Fire Code requirements - Construction-phase fire safety requirements - Protection of mass timber during construction |
| Topic 5: Code Compliance and Related Requirements | - Documentation and verification of compliance - Energy code requirements applicable to mass timber buildings - Sound transmission requirements |
| Topic 6: Structural Inspection | - Mass timber structural elements - Structural loads and related code requirements - Connections and fastening systems |
>> 93-Tall-Mass-Timber-Buildings過去問 <<
PassTest各製品には試用版があり、当社の製品は例外なく、文字通り、93-Tall-Mass-Timber-Buildings準備ガイドのWebサイトを閲覧すると、93-Tall-Mass-Timber-Buildingsガイド急流が無料デモを提供できることを意味します。お客様が事前に当社の製品について理解を深めることができます。さらに、スケジュールよりも前に進んでいる場合は、93-Tall-Mass-Timber-Buildings試験トレントがあなたに適しているかどうかを検討できます。さらに、通常のお客様になると、より多くの会員割引と93-Tall-Mass-Timber-Buildings優待サービスをお楽しみいただけます。
質問 # 13
Which of the following construction Types permit concealed spaces to be protected by completely filling the concealed space with noncombustible insulation?
正解：B
解説：
Type IV-HT construction permits concealed spaces where those spaces comply with the specific protection alternatives prescribed for traditional heavy-timber construction. One permitted method is to completely fill the concealed space with noncombustible insulation. Therefore, option D is correct.
This provision should not be confused with the concealed-space requirements applicable to the tall mass timber classifications-Types IV-A, IV-B, and IV-C. Those classifications employ dedicated noncombustible protection and assigned-time requirements intended to control the contribution of concealed combustible construction during a fire. Type IV-HT follows a different concealed-space framework and allows protection through approved alternatives, including sprinkler protection, gypsum-board enclosure, or complete filling with noncombustible insulation, as applicable.
The insulation must completely occupy the concealed volume. Merely installing partial batt insulation, leaving unprotected voids, or relying on nominally fire-resistant thermal insulation does not satisfy the provision. The inspector should verify the material's noncombustibility, continuity, placement around obstructions, and conformance with the approved construction documents before the space becomes inaccessible.
References/Topics: 2021 IBC Section 602.4.4; concealed spaces in Type IV-HT construction; noncombustible insulation protection method.
質問 # 14
Each of the following is true regarding the fire-resistance rating for exterior bearing walls except:
正解：D
解説：
Option A is the incorrect statement and therefore the required answer. Under 2021 IBC Table 601, an exterior bearing wall in Type IV-C construction requires a two-hour fire-resistance rating , not one hour.
The tall mass timber classifications progressively vary the degree of noncombustible protection and allowable exposure, but the structural fire-resistance requirements remain substantial. Type IV-A exterior bearing walls require three hours. Type IV-B exterior bearing walls require two hours. Type IV-C exterior bearing walls also require two hours. Thus, options B, C, and D correctly reproduce the Table 601 values.
The special inspector must also recognize that Table 601 is not necessarily the only rating criterion affecting an exterior wall. Exterior walls are additionally subject to the requirements associated with fire separation distance, particularly Table 705.5. Where another IBC provision requires a higher rating, that more restrictive condition controls.
For mass timber construction, compliance also depends on the prescribed protective system, member dimensions, connections, joints, intersections, and exterior-side protection. A wall cannot be accepted as compliant solely because the timber cross section appears substantial; it must conform to the approved rated design.
References/Topics: 2021 IBC Section 601; Table 601; Section 602.4; Table 705.5.
質問 # 15
What fire-resistance rating is required for floors in Type IV-A, IV-B and IV-C construction?
正解：B
解説：
IBC Table 601 requires floor construction and associated secondary structural members in Types IV-A, IV-B, and IV-C construction to have a two-hour fire-resistance rating. Therefore, option B is correct.
This requirement applies to the complete floor assembly, not only the timber panel. The required two-hour performance may be established through the calculated fire resistance of the mass timber, the contribution of approved noncombustible protection, or a permitted combination of both. Any topping, protective membrane, connection protection, and edge condition that forms part of the approved rated design must be installed accordingly.
The ratings for other building elements should not be transferred to the floor. A three-hour rating applies to the primary structural frame and bearing walls of Type IV-A, but its floor construction remains two hours.
Type IV-B and Type IV-C floors also require two hours, even though those construction types permit different degrees of exposed mass timber.
The special inspector must verify panel dimensions, approved layup, protection layers, joints, penetrations, connections, topping thickness, and other details that influence the floor's rated performance.
References/Topics: 2021 IBC Sections 601 and 602.4; Table 601, floor construction and associated secondary structural members.
質問 # 16
Refer to the exhibit by clicking on the EXHIBIT button above.
In the detail shown and according to AWC Technical Report 10, what is the time assigned in minutes to 5/8 in. Type X gypsum board for connection fire protection thermal separation requirements?
正解：A
解説：
For the illustrated two-layer protection system, the 5/8-inch Type X gypsum-board layer directly adjacent to the connection is assigned 20 minutes, while the second layer is assigned 40 minutes. Therefore, option C is correct.
The standard assigned protection time for one layer of 5/8-inch Type X gypsum board is 40 minutes.
However, the thermal-separation methodology applies a 0.50 reduction factor to the final or base Type X layer located directly against the protected connection. That layer therefore contributes 20 minutes. The outer layer retains its full 40-minute assigned value, producing a combined assigned protection time of 60 minutes for the two-layer configuration.
The layers are not interchangeable for calculation purposes because the reduced contribution applies specifically to the layer adjacent to the protected connection. Options A and B incorrectly assign the same value to both layers, while option D reverses the required allocation.
During inspection, the special inspector should verify layer sequencing, board thickness and type, fastening, joint staggering, edge support, protection at corners, and continuity around the connection. Missing or incorrectly sequenced layers can invalidate the calculated thermal-separation time.
References/Topics: AWC Technical Report 10; AWC 2021 Fire Design Specification Section 3.5.2.1; assigned protection time for Type X gypsum board.
質問 # 17
One code-recognized method for calculating the fire-resistance rating of exposed wood members and decking is:
正解：A
解説：
The intended answer is ANSI/AWC NDS Chapter 16. The video option uses "AWS," but the correct standards organization is the American Wood Council-AWC . Option D is therefore correct based on its intended reference.
IBC Section 722.1 expressly permits exposed wood members and wood decking to have their calculated fire resistance determined in accordance with Chapter 16 of the ANSI/AWC National Design Specification for Wood Construction. The method evaluates charring, the effective char depth, the reduced residual cross section, elevated-temperature effects, loading, and the remaining structural capacity for the required exposure period.
ACI 216.1 applies to concrete and masonry fire resistance. TMS 0216 addresses masonry assemblies. ASCE
29 Chapter 5 provides procedures for calculating the fire resistance of structural steel assemblies. Those references are code-recognized methods, but they apply to different construction materials.
For mass timber inspection, the approved calculations should identify the exposed surfaces, required rating, timber species or product, member dimensions, design loads, protective contribution, and connection treatment. Field reductions in member dimensions can invalidate the calculated fire resistance.
References/Topics: 2021 IBC Section 722.1; ANSI/AWC NDS Chapter 16; calculated fire resistance of exposed wood members and decking.
質問 # 18
......
私たちの93-Tall-Mass-Timber-Buildings学習教材の合格率は、クライアントが最も気にする問題であり、当社の製品の合格率は99％であり、ヒット率も高いことをクライアントに約束することができます。当社の93-Tall-Mass-Timber-Buildings学習資料は、実際の93-Tall-Mass-Timber-Buildings試験に基づいて厳選されており、過去数年間の試験論文を参照しています。私たちの専門家チームは彼らに多くの努力を注ぎ、それぞれの答えと質問が有用で価値があることを保証します。また、クライアントがより多くの93-Tall-Mass-Timber-Buildings学習リソースを取得し、時代の動向を追跡できるように、頻繁に更新します。したがって、当社の学習教材を使用すると、高い成功確率でテストに合格します。
93-Tall-Mass-Timber-Buildings復習内容: https://www.passtest.jp/International-Code-Council/93-Tall-Mass-Timber-Buildings-shiken.html