To prepare successfully in a short time, you need a trusted platform of real and updated Huawei H35-831 exam dumps. Studying with updated H35-831 practice questions improve your skills of clearing the certification test in a short time. ActualTestsQuiz makes it easy for you to prepare successfully for the H35-831 Questions in a short time with H35-831 Dumps. The product of ActualTestsQuiz has been prepared under the expert supervision of thousands of experts worldwide.
| Section | Weight | Objectives |
|---|---|---|
| Backbone Network Planning | 8% | - Scalability design - Capacity and traffic planning - Architecture design |
| High Reliability | 8% | - Network redundancy mechanisms - Fast protection switching - Fault detection and recovery |
| Multicast Protocols | 6% | - MSDP and anycast RP - Multicast QoS - PIM-SM/SSM |
| Advanced Routing Protocols | 15% | - Route control and fast convergence - BGP and MP-BGP - OSPF advanced features - IS-IS advanced features |
| Tunnel Technologies | 15% | - MPLS fundamentals - SR-MPLS and SRv6 - TE and traffic engineering |
| Cloud Bearer Network | 8% | - Cloud interconnection architecture - Cloud service bearer requirements - DC interconnect technologies |
| Network Orchestration & Automation | 2% | - iMaster NCE overview - SDN and controller architecture |
| VPN Technologies | 15% | - MPLS L3VPN - EVPN and VXLAN - VPN deployment and troubleshooting |
| Automatic O&M | 2% | - Monitoring and analysis - Fault management |
| IP Mobile Backhaul | 10% | - 5G/4G backhaul architecture - Synchronization and timing - Service isolation and QoS |
>> H35-831 Reliable Test Voucher <<
Wondering where you can find the perfect materials for the exam? Don't leave your fate depending on thick books about the H35-831 exam. Our authoritative H35-831 study materials are licensed products. Whether newbie or experienced exam candidates you will be eager to have our H35-831 Exam Questions. And they all made huge advancement after using them. Not only that you will get the certification, but also you will have more chances to get higher incomes and better career.
NEW QUESTION # 42
If a 5G transport network uses OSPF as its IGP, which of the following statements about OSPF SR-TE is incorrect?
Answer: A
Explanation:
Huawei Reference Verification:
Huawei OSPF Traffic Engineering extensions distribute link and resource attributes in OSPF opaque LSAs for constrained path computation. MPLS TE must be enabled in relevant areas and opaque-LSA capability available, while BGP-LS can report the IGP topology to a controller. An Ethernet OSPF link can be configured as point-to-point, a common 5G transport design because it avoids DR/BDR behavior on links connecting only two routers. Thus there is no general requirement for Ethernet OSPF interfaces to be broadcast type in order to support TE. Option B's absolute requirement and exclusion of other network types is incorrect.
Technical Deep Dive:
B is incorrect. OSPF supports broadcast, point-to-point, and other network types. Although Ethernet interfaces default to broadcast mode in many implementations, routed transport links between pairs of carrier routers often use point-to-point adjacency. In the intended SR-TE architecture, point-to-point can provide a simpler topology representation and avoid designated-router election. MPLS TE extensions advertise TE link characteristics, including relevant bandwidth and administrative attributes, using OSPF opaque LSAs. BGP- LS can export these topology attributes to an NCE/PCE for centralized computation. Options A and C concern enabling the applicable TE and opaque-LSA functions, and D concerns enabling topology reporting to the controller. Broadcast OSPF is not universally incapable of any TE function; the flaw in B is the claim that broadcast mode is required and that another network type necessarily prevents TE. Always distinguish general OSPF TE capabilities from release-specific SR-TE interface recommendations.
#######################################################
NEW QUESTION # 43
As illustrated, L3VPN services are transported over an SRv6 TE Policy, with SRv6 enabled through IS-IS extensions. The network has deployed the following protection technologies, but fast fault detection has not been configured. Under normal conditions, traffic on the upper plane follows CE1 # PE1 # P1 # PE2 # CE2. If PE2 fails, which technology preferentially provides protection?
Exhibit 59.1 - Original topology/configuration figure
Answer: C
Explanation:
Huawei Reference Verification:
Huawei SRv6 TE Policy protection distinguishes failures of midpoint transit nodes from failure of an egress PE serving a customer VPN. Egress protection prepares an alternate egress PE capable of executing the relevant VPN forwarding service when the primary egress fails. The depicted normal path terminates at PE2, while PE4 provides redundant reachability to CE2. Midpoint repair would not by itself replace the unavailable service endpoint. Therefore egress protection is the intended mechanism when PE2 fails, regardless of whether BFD has been configured for fast detection.
Technical Deep Dive:
B is correct. Under normal operation L3VPN traffic traverses CE1 - > PE1 - > P1 - > PE2 - > CE2. PE2 is the service egress. Failure of PE2 removes the endpoint that performs the final SID behavior and VPN delivery.
Egress protection allows the repair point to redirect packets toward a backup PE such as PE4 that has suitable service forwarding information and reachability to CE2. Midpoint protection addresses transit failures rather than loss of the VPN endpoint. SRv6 TE hot standby changes segment lists or candidate paths, but alone does not necessarily provide a functioning alternate service egress. BFD would normally improve detection and switching time; without it, interface state or IGP/other fault indications can still identify a failure, with potentially slower reaction. The protection architecture must provide backup egress service state and suitable routing information to deliver the customer packet correctly.
#######################################################
NEW QUESTION # 44
In the OSPFv3 network shown, RTD imports an external route. The AS-External-LSA details are checked on RTG. Based on the following information, what should the Originating Router be?
Exhibit 37.1 - Original topology/configuration figure
Exhibit 37.2 - Original topology/configuration figure
Answer: C
Explanation:
Huawei Reference Verification:
Huawei OSPFv3 defines an AS-External-LSA as a link-state advertisement originated by an ASBR that imports external reachability into the OSPF domain. The LSA's Advertising Router field retains the 32-bit router ID of the originating ASBR as the advertisement is flooded through different areas and received by downstream nodes. RTD imports the prefix 3001:1::/48 and has router ID 4.4.4.4; RTG merely examines the resulting LSDB. The Originating Router is therefore 4.4.4.4, not RTG's router ID or an intermediate router's identifier.
Technical Deep Dive:
A is correct. RTD acts as the OSPFv3 ASBR by executing an IS-IS route import. The external IPv6 prefix is described in an OSPFv3 AS-External-LSA, which is distributed to other areas according to OSPFv3 flooding rules. Although OSPFv3 carries IPv6 routing information, its Router ID remains a 32-bit identifier displayed in dotted-decimal form. RTD's Router ID is 4.4.4.4. RTE (5.5.5.5), RTF (6.6.6.6) and RTG (7.7.7.7) can receive and propagate the LSA but do not replace the advertising router field. The identity is crucial because routers use the ASBR and routing information in the LSDB to calculate how to reach the external destination.
The command `display ospfv3 lsdb external` provides the relevant LSA fields, including the Originating Router and advertised external prefix.
#######################################################
NEW QUESTION # 45
Which of the following statements are correct regarding the reliability of MVPNv4 over BIERv6?
Select all that apply.
Answer: A,B,C,D
Explanation:
Huawei Reference Verification:
Huawei's MVPNv4 over BIERv6 reliability architecture supports dual-root 1+1 protection in which primary and backup multicast ingress paths can be established concurrently. Separate routing paths reduce the impact of a single shared failure. The receiving PE can obtain packets through both roots but normally delivers one selected stream into the customer VPN to avoid duplicate service delivery. Upon loss of primary traffic it evaluates availability of the backup stream and may initiate a C-multicast rejoin when both reception paths are impaired. Huawei-China Unicom interoperability testing demonstrated dual-root BIERv6 recovery, supporting the principal architecture. The exact C-multicast recovery trigger remains release-specific.
Technical Deep Dive:
A, B, C and D are the intended answers. Planning diverse primary and backup tunnels reduces common-mode failure exposure. With 1+1 dual-root protection the sender's multicast flow is injected toward receiver PEs via both ingress roots, allowing a receiver to keep the backup copy available before failure. Normally only one copy is forwarded to the private/customer VPN. If the preferred primary stream fails, the receiver uses the valid backup stream; if backup reception is also abnormal, the MVPN control plane may resignal a C- multicast route to restart receiver membership. The mechanism differs from 1:1 cold restoration, which would need to establish a new path after failure. BIERv6 uses per-set BitStrings and a BIFT, so transit routers need not maintain every customer (S,G) state. The exact timing and resignal behavior in C depends on the product implementation; the overall 1+1 dual-root concept is established.
#######################################################
NEW QUESTION # 46
In the inter-AS VPN Option A network shown, CE1 and CE2 are in the same VPN. LDP and IGP are configured in both AS100 and AS200, and EBGP is configured between the ASBRs. CE1's loopback interface is assigned 10.1.1.1/32. If CE2 can ping CE1, which router assigns the inner label to CE2-to-CE1 packets forwarded by PE2?
Exhibit 45.1 - Original topology/configuration figure
Answer: C
Explanation:
Huawei Reference Verification:
In Huawei inter-AS MPLS VPN Option A, each ASBR runs customer VPN instances and exchanges VPN route information with its opposite ASBR over an ordinary inter-AS IP routing relationship. The ASBR-to- ASBR boundary resembles a CE-PE attachment rather than a single end-to-end MPLS VPN LSP. Within each AS, local MP-BGP advertisements include locally allocated VPN labels. For traffic traveling from CE2 in AS200 toward CE1 in AS100, ASBR2 advertises the CE1 destination route to PE2 using the VPN label allocated by ASBR2. Therefore ASBR2 supplies PE2's inner VPN label.
Technical Deep Dive:
B is correct. CE1 originates route 10.1.1.1/32, which PE1 learns and advertises through VPNv4 toward ASBR1 in AS100. In Option A, ASBR1 exchanges the corresponding ordinary IP route across the inter-AS VPN attachment to ASBR2. ASBR2 then advertises it to PE2 in AS200 as a labeled VPNv4 route and allocates its local VPN label. PE2 pushes this VPN label as the inner label and, where necessary, a public transport label outside it. P2 handles the transport forwarding, while ASBR2 interprets the local VPN context and forwards the packet across the AS boundary. The labels used in AS100 and AS200 need not be the same.
The defining principle of Option A is that VPN state and inter-AS connectivity terminate on both ASBRs, avoiding one continuous end-to-end VPN label stack.
#######################################################
NEW QUESTION # 47
......
We have prepared our H35-831 training materials for you. They are professional practice material under warranty. Accompanied with acceptable prices for your reference, all our materials with three versions are compiled by professional experts in this area more than ten years long. Moreover, there are a series of benefits for you. So the importance of H35-831 Actual Test is needless to say. If you place your order right now, we will send you the free renewals lasting for one year. All those supplements are also valuable for your H35-831 practice exam.
Questions H35-831 Pdf: https://www.actualtestsquiz.com/H35-831-test-torrent.html