Our users can prove to you that the hit rate of our JN0-352 exam questions is very high. And you can just see the data how many customers are visiting our JN0-352 study materials everyday. And the pass rate is also high as 98% to 100%. You can walk into the examination room with peace of mind, after which you will experience a very calm examination. As for the result, please come home and wait. Our JN0-352 training prep will not disappoint you.
| Section | Objectives |
|---|---|
| Network Services | - NAT concepts in Junos - Basic multicast concepts |
| Routing Policy and Filtering | - Route filtering and preference control - Policy statements |
| Routing Protocols | - BGP fundamentals and policy control - IS-IS overview - OSPF configuration and troubleshooting |
| Layer 2 Switching Technologies | - VLANs and trunking - Spanning Tree Protocol (STP/RSTP/MSTP) - Ethernet switching concepts |
| Operations and Troubleshooting | - Troubleshooting routing and switching issues - Junos CLI monitoring tools |
| High Availability | - Redundancy concepts in enterprise networks - VRRP configuration and behavior |
>> Valid Test Juniper JN0-352 Testking <<
You will be able to experience the real exam scenario by practicing with Juniper JN0-352 practice test questions. As a result, you should be able to pass your Juniper JN0-352 Exam on the first try. Juniper JN0-352 desktop software can be installed on Windows-based PCs only. There is no requirement for an active internet connection.
NEW QUESTION # 120
You deployed a new EX Series switch with DHCP snooping enabled and you do not see any entries in the snooping databases for an interface. Which two Juniper configurations for that interface caused this issue? (Choose two.)
Answer: C,D
Explanation:
A is correct because the interface is configured as a disabled port. A disabled port does not forward any traffic, including DHCP packets. Therefore, DHCP snooping cannot learn any MAC addresses or lease information from a disabled port.
C is correct because the interface is configured as a trunk port. By default, all trunk ports on the switch are trusted for DHCP snooping. This means that DHCP snooping does not inspect or filter any DHCP packets received on a trunk port. Therefore, DHCP snooping does not add any entries to the snooping database for a trunk port.
NEW QUESTION # 121
Two Juniper Networks EX Series Switches are connected with four 1-GbE links configured as a single link aggregation group (LAG). One of the physical member links experiences a failure. By default, what impact will this failure have on traffic forwarding between the switches?
Answer: C
Explanation:
A link aggregation group bundles multiple physical Ethernet links into a single logical interface (an ae interface) specifically to provide both increased aggregate bandwidth and link-level redundancy. By default, the aeX interface remains operationally up as long as at least one member link within the bundle remains active and passing traffic; the LAG does not require every member link to be functional to continue operating. When one of the four 1-GbE member links in this scenario fails, LACP (if in use) or the underlying link-status monitoring detects the failure, removes that specific link from the active forwarding set, and redistributes traffic hashing across the three remaining healthy member links automatically and without operator intervention. End devices and upper-layer protocols continue to see a single, continuously up ae interface throughout this process, experiencing only a proportional reduction in available aggregate bandwidth rather than any interruption in connectivity. This default behavior is precisely why LAG is a foundational building block for resilient EX Series switch interconnects in enterprise and data center designs, since it allows individual optic, cable, or transceiver failures to be absorbed transparently. None of the distractor behaviors -- full administrative shutdown of the bundle, forwarding limited to broadcast traffic only, or a temporary disabling of all member links during renegotiation -- reflect actual Junos LAG behavior, which is designed explicitly to avoid any such disruption.
NEW QUESTION # 122
You need to block SSH (TCP port 22) traffic from the 192.168.10.0/24 network.
Which firewall filter term is correct in this scenario?
Answer: A
NEW QUESTION # 123
Which statement is correct about the configuration shown in the exhibit?
Answer: B
NEW QUESTION # 124
You are verifying a new BGP peering session with an ISP. You issue the show bgp summary command, but the output shows the peer in the Active state. Which statement is correct in this scenario?
Answer: D
Explanation:
The BGP finite state machine defined in RFC 4271 progresses through Idle, Connect, Active, OpenSent, OpenConfirm, and finally Established. The Active state is entered either directly after Idle, when the local router begins retrying a TCP connection setup toward the configured peer, or after a previous Connect attempt has failed and the ConnectRetry timer has expired, prompting the router to keep trying to complete the underlying TCP three-way handshake. Seeing a peer parked in Active therefore means the local device has a fully valid neighbor configuration and is persistently attempting to reach the remote address on TCP port 179, but the handshake is not succeeding -- common root causes include a firewall or ACL blocking TCP 179 between the two endpoints, an unreachable or incorrect peer IP address, the remote BGP process not running or not listening, or an asymmetric routing path preventing the SYN/ACK from returning. It does not indicate a misconfiguration on the local box in the sense of a missing statement (that would typically leave the session as Idle), nor does it indicate an established, functioning session exchanging UPDATE messages (that state is Established), and it is not a deliberately idle/disabled condition, which Junos reports plainly as Idle. Recognizing Active as 'trying to connect' rather than 'connected' is essential for correct BGP troubleshooting sequencing.
NEW QUESTION # 125
......
If you are looking to advance in the fast-paced and technological world, Juniper is here to help you achieve this aim. Juniper provides you with the excellent Enterprise Routing and Switching, Specialist (JNCIS-ENT) practice exam, which will make your dream come true of passing the Juniper JN0-352 Certification Exam.
Latest JN0-352 Test Pass4sure: https://www.validtorrent.com/JN0-352-valid-exam-torrent.html