DOWNLOAD the newest TestPassKing H35-580_V2.0 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1QZfUjnXgYkmq7LJBo4_cWOb2YVZTBS09
This is a crucial part of your study to know your mistakes and overcome them before the Huawei H35-580_V2.0 final test. Customizable test sessions allow you to modify the setting of the H35-580_V2.0 mock test according to your training needs. Both Huawei H35-580_V2.0 Practice Tests desktop and web-based create a scenario that gives an exact feeling of the Huawei H35-580_V2.0 real test.
| Section | Weight | Objectives |
|---|---|---|
| 5G Radio Network Basics | 20% | - 5G Physical Layer - 5G Network Architecture and Interface - Overview of 5G Basic Signaling Process - 5G Overview |
| 5G Network Planning Basics | 20% | - 5G Site Solution Overview - 5G Site Survey and Planning - 5G Wireless Network Coverage and Capacity Estimation |
| 5G Network Testing and Optimization | 30% | - Analysis of 5G Radio Network Coverage Problems - Radio Network Performance Management Basics - 5G Network Test and Problem Analysis |
| 5G Radio Network Basic Feature | 20% | - NSA Networking Based on EPC Feature - 5G NR Mobility Management Feature - 5G MIMO Feature - Uplink Fallback to LTE - 5G NR Scheduling Feature - 5G NR Power Control Feature |
| 5G Base Station Basic Operation | 10% | - 5G Base Station Basic Operation - Huawei 5G Base Station Product Overview |
>> New H35-580_V2.0 Mock Test <<
Our H35-580_V2.0 study materials are very popular in the international market and enjoy wide praise by the people in and outside the circle. We have shaped our H35-580_V2.0 exam questions into a famous and top-ranking brand and we enjoy well-deserved reputation among the clients. Our H35-580_V2.0 learning guide boosts many outstanding and superior advantages which other same kinds of exam materials donโt have. And we are very reliable in every aspect no matter on the quality or the according service.
NEW QUESTION # 45
In cases where the same devices are used, which of the following link budget parameters may differ depending on use in either densely populated urban areas or rural areas?(Select All that Apply)
Answer: B,C,D
Explanation:
Explanation
The link budget parameters that may differ depending on use in either densely populated urban areas or rural areas are area coverage rate, shadow fading margin, and penetration loss. The area coverage rate is the percentage of area within a cell that can receive a signal above a certain threshold. In densely populated urban areas, the area coverage rate may be lower than in rural areas due to more interference and obstacles 13. The shadow fading margin is an additional margin added to the link budget to account for the variation of signal strength due to obstacles in the propagation path. In densely populated urban areas, there may be more buildings and structures that cause shadow fading than in rural areas, so a larger shadow fading margin may be needed 14. The penetration loss is the loss of signal strength when it passes through walls or windows into buildings. In densely populated urban areas, there may be more indoor users than in rural areas, so a larger penetration loss may be considered 15. The antenna gain is not a parameter that depends on use in either densely populated urban areas or rural areas. It is a parameter that depends on the antenna design and configuration, which are usually fixed for a given system 16.
NEW QUESTION # 46
In NSA networking, which of the following methods can be used to support X2 interconnection between an eNodeB and a gNodeB?(Select All that Apply)
Answer: A,D
Explanation:
Explanation
According to the 5G EN-DC Architecture and Interfaces, there are two methods that can be used to support X2 interconnection between an eNodeB and a gNodeB in NSA networking:
Interconnection through CI interfaces on the UMPT boards in different subracks: The UMPT is a universal main processing and transmission unit that provides main processing and transmission functions for a subrack. The UMPT has two CI interfaces that can be used for X2 interconnection with other base stations. The CI interfaces support CPRI, OBSAI, and eCPRI protocols and can use optical fibers or electrical cables for transmission. The CI interfaces can be configured as master or slave interfaces depending on the network topology.
IPRAN interconnection between subracks: IPRAN is an IP-based radio access network that uses IP transport technologies to carry base station traffic over Ethernet or MPLS networks. IPRAN can support X2 interconnection betweendifferent base stations by using IP routers or switches. IPRAN can provide flexible networking, high bandwidth, low latency, and high reliability for X2 interconnection.
The other two methods are not valid for X2 interconnection between an eNodeB and a gNodeB:
Interconnection via backplane in a subrack: This method is only applicable for X2 interconnection between two eNodeBs or two gNodeBs that are installed in the same subrack. The backplane is the internal bus that connects different boards within a subrack. The backplane supports CPRI, OBSAI, and eCPRI protocols and can provide high-speed data transmission between boards.
Interconnection through HEI interfaces on the UBBP boards in different subracks: This method is not supported by Huawei base stations. The HEI interface is a high-speed Ethernet interface that is used for data transmission between base stations and core networks or transport networks. The HEI interface supports S1, Xn, F1, E1, and N2 protocols and can use optical fibers or electrical cables for transmission. The HEI interface cannot be used for X2 interconnection between base stations.
Therefore, the correct answer is A and D.
NEW QUESTION # 47
Among the A3 event parameters for intra-frequency handover, which of the following parameters cannot be configured individually based on QCI?
Answer: A
Explanation:
CIO is configured per neighbor relation and is not typically differentiated according to QCI.
NEW QUESTION # 48
In RAN3.0 version, which of the following PUCCH formats does the base station not support?
Answer: D
Explanation:
RAN3.0 supports PUCCH Formats 1, 2, and 3, but does not support Format 4.
NEW QUESTION # 49
In RAN3.0 version, CSI-RS for beam management is not supported in low-frequency scenarios.
Answer: A
Explanation:
Low-band deployments mainly rely on SSB-based beam management, and CSI-RS beam management is not supported in this scenario.
NEW QUESTION # 50
......
Are you tired of feeling overwhelmed and unsure about how to prepare for your HCIA-5G-RNP&RNO V2.0 (H35-580_V2.0) exam? Are you ready to take control of your future and achieve the scores you want to get in the HCIA-5G-RNP&RNO V2.0 (H35-580_V2.0) certification exam? If so, it's time to buy real Huawei H35-580_V2.0 Dumps of TestPassKing our team of experts has designed the product that has already helped thousands of students just like you pass the exam.
Latest H35-580_V2.0 Test Sample: https://www.testpassking.com/H35-580_V2.0-exam-testking-pass.html
What's more, part of that TestPassKing H35-580_V2.0 dumps now are free: https://drive.google.com/open?id=1QZfUjnXgYkmq7LJBo4_cWOb2YVZTBS09