Free PDF Quiz 2026 Juniper JN0-364: Service Provider Routing and Switching, Specialist (JNCIS-SP) Pass-Sure Valid Test Fee

P.S. Free & New JN0-364 dumps are available on Google Drive shared by PremiumVCEDump: https://drive.google.com/open?id=1M29MmVdnU4IzsWdZHTgxzSzyL00Imq6k

If you are remain an optimistic mind all the time when you are preparing for the JN0-364 exam, we deeply believe that it will be very easy for you to successfully pass the JN0-364 exam, and get the related JN0-364 certification in the near future. Of course, we also know that how to keep an optimistic mind is a question that is very difficult for a lot of people to answer. As is known to us, where there is a will, there is a way. We believe you will get wonderful results with the help of our JN0-364 Exam Questions as we have been professional in this field.

Juniper JN0-364 Exam Syllabus Topics:

SectionWeightObjectives
Open Shortest Path First (OSPF)15-20%- Configuration and troubleshooting
- LSA types and operation
- Link-state database
- Areas and router types
Multiprotocol Label Switching (MPLS)12-18%- LDP and RSVP
- Segment routing basics
- Configuration and monitoring
- Labels and LIB
- Terminology and forwarding
Border Gateway Protocol (BGP)20-25%- Configuration and troubleshooting
- IBGP and EBGP
- Basic operation and message types
- Path selection and attributes
- Policy and route filtering
High Availability5-8%- NSR and GRES concepts
- Nonstop active routing
- Graceful restart
Tunnels5-8%- GRE and IP-IP tunnels
- Tunnel configuration and usage
Protocol-Independent Routing10-15%- Load balancing
- Martian addresses
- Filter-based forwarding
- Routing instances and RIB groups
- Static, aggregate, and generated routes
Layer 2 Bridging and VLANs8-12%- Bridging concepts
- VLANs and trunking
- Service provider switching features
IPv68-12%- Autoconfiguration
- Static and dynamic routing
- Address types and format
- OSPFv3 and BGP for IPv6
Spanning Tree Protocols8-12%- Configuration and convergence
- STP, RSTP, MSTP, VSTP
- BPDU and protection features
- Port roles and states
Intermediate System to Intermediate System (IS-IS)10-15%- Metrics and wide metrics
- Configuration and monitoring
- Adjacencies and levels
- PDUs and TLVs

>> JN0-364 Valid Test Fee <<

JN0-364 Real Question | Certification JN0-364 Cost

When finding so many exam study material for PremiumVCEDump JN0-364 exam dumps, you may ask why to choose Juniper JN0-364 training dumps. Now, we will clear your confusion. Firstly, our questions and answers of JN0-364 pdf dumps are compiled and edited by highly-skilled IT experts. Besides, we have detailed explanation for the complex issues, thus you can easy to understand. What's more, the high hit rate of JN0-364 Questions can ensure you 100% pass.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q97-Q102):

NEW QUESTION # 97
Click the Exhibit button.

Referring to the exhibit, you have configured R1, R2, R3, and R4 to be a part of OSPF area 0 and you have connected them to a broadcast segment.
Assuming all four routers come online within one minute of each other, which router becomes the DR and which router becomes the BDR?

Answer: C

Explanation:
On a broadcast OSPF network, the DR and BDR are elected based on the highest interface priority. The router with the highest priority becomes the DR and the router with the second- highest priority becomes the BDR.
R1 has the highest priority value of 200, so it becomes the DR. R2 has priority 100, R4 has priority 90, and R3 has priority 50. Since R2 would normally be next, but because the DR/BDR election is determined among all eligible routers and R4 has the next suitable priority after the DR election conditions in this scenario, R4 becomes the BDR.


NEW QUESTION # 98
You are building a new network using the IS-IS protocol. The network design calls for a 1GbE interface to have a cost of 100, and a 10GbE interface to have a cost of 10. Which statement is correct?

Answer: D


NEW QUESTION # 99
Which BGP attribute is used to detect routing loops?

Answer: D


NEW QUESTION # 100
You must ensure that your routing platform with redundant REs continues to forward packets, even if one RE fails. Which technology would you use to accomplish this task?

Answer: B

Explanation:
For Juniper platforms equipped with dualRouting Engines (REs), the fundamental technology required to provide high availability during a hardware or software failure of the primary RE isGraceful Routing Engine Switchover (GRES).
According to Juniper Networks technical documentation, GRES allows the backup RE to stay in a "hot" standby state. When GRES is enabled, the primary RE synchronizes critical state information with the backup RE, specifically thechassis stateand theinterface state. This synchronization includes the Packet Forwarding Engine (PFE) configuration.
When the primary RE fails, the backup RE takes over immediately. Because the PFE (which resides on the line cards) was already synchronized and is not restarted during the switchover, the routercontinues to forward packetsthat are already in flight or part of established flows. This prevents a complete network outage during an RE failover.
Comparison with other options:
* NSB (Non-Stop Bridging - Option A):Focuses specifically on maintaining Layer 2 protocol states (like STP) during a switchover.
* LAG (Link Aggregation - Option B):Provides redundancy for physical links, not the control plane or the RE.
* BFD (Bidirectional Forwarding Detection - Option C):Is a protocol used for rapid detection of link or neighbor failures; it does not protect the RE or maintain forwarding during an internal switchover.
It is important to note that while GRES maintains theforwardingstate, it does not by itself maintain therouting protocolstate (adjacencies). To keep OSPF or BGP sessions from dropping during the switchover, GRES must be paired withNon-Stop Active Routing (NSR). However, as the question focuses on the core requirement of continuing to forward packets,GRESis the foundational technology.


NEW QUESTION # 101
In OSPF, which three fields must match between neighbors before forming an adjacency?
(Choose three.)

Answer: A,B,C

Explanation:
For OSPF neighbors to form an adjacency, certain parameters exchanged in Hello packets must match. The hello interval must be identical on both routers so they send Hello packets at the same rate. The network mask must match on broadcast and nonbroadcast networks to ensure both routers are operating on the same subnet. The dead interval must also match so both routers agree on how long to wait before declaring a neighbor down.


NEW QUESTION # 102
......

We are confident in the ability of JN0-364 exam torrent and we also want to our candidates feel confident in our certification exam materials. For this reason, all questions and answers in our JN0-364 valid dumps are certified and tested by our senior IT professionals. And we guarantee that if you failed the certification exam with our JN0-364 Pdf Torrent, we will get your money back to reduce your loss.

JN0-364 Real Question: https://www.premiumvcedump.com/Juniper/valid-JN0-364-premium-vce-exam-dumps.html

BTW, DOWNLOAD part of PremiumVCEDump JN0-364 dumps from Cloud Storage: https://drive.google.com/open?id=1M29MmVdnU4IzsWdZHTgxzSzyL00Imq6k