DOWNLOAD the newest Getcertkey HPE7-A01 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1IRVwfiIb5jQwyA1mCZWXO326LAdbQSrh
We are conscious of the fact that most of the candidates have a tight schedule which makes it tough to prepare for the HP HPE7-A01 exam preparation. Getcertkey provides you with HP HPE7-A01 Exam Questions in 3 different formats to open up your study options and suit your preparation tempo.
| Section | Weight | Objectives |
|---|---|---|
| Troubleshooting | 6% | - Fault Isolation and Diagnostics
|
| Managing and Monitoring | 6% | - Network Operations
|
| Network Stack | 4% | - Networking Fundamentals
|
| Connectivity | 8% | - Campus Connectivity Technologies
|
| Performance Optimization | 7% | - Optimization Techniques
|
| Switching | 14% | - Layer 2 and Layer 3 Switching
|
| Network Resiliency and Device Virtualization | 8% | - Redundancy and High Availability
|
| Security | 9% | - Campus Security
|
| WLAN | 17% | - Wireless LAN Technologies
|
| Authentication and Authorization | 8% | - AAA Services
|
| Routing | 13% | - Routing and Network Services
|
>> Test HPE7-A01 Dumps Demo <<
These features have made Getcertkey HPE7-A01 pdf questions format the most reputable prep material for the quick and restrictions-free exam preparation. As laptops, tablets, and smartphones support this HP HPE7-A01 pdf format, you can easily learn from your comfort zone in your free time.
NEW QUESTION # 87
Which statement best describes QoS?
Answer: C
Explanation:
QoS stands for Quality of Service and is a mechanism that allows network devices to prioritize and differentiate traffic based on certain criteria, such as application type, source, destination, etc.
QoS involves identifying specific traffic for special treatment and applying policies and actions to improve its performance or meet certain service level agreements (SLAs). QoS can help network devices to manage congestion, delay, jitter, packet loss, bandwidth allocation, etc., for different types of traffic. QoS can be implemented at various layers of the network stack and across different network domains.
NEW QUESTION # 88
Using HPE Aruba Networking best practices, what should be enabled for visitor networks where encryption is needed but authentication is not required?
Answer: C
Explanation:
Opportunistic Wireless Encryption (OWE) is a feature that provides encryption for open wireless networks without requiring authentication. OWE uses an enhanced version of the 4-way handshake to establish a pairwise key between the client and the AP, which is then used to encrypt the wireless traffic using WPA2 or WPA3 protocols. OWE can be used for visitor networks where encryption is needed but authentication is not required.
NEW QUESTION # 89
Which statements regarding Aruba NAE agents are true? (Select two )
Answer: B,E
Explanation:
A). A single NAE script can be used by multiple NAE agents.
This is true because NAE scripts are designed to be reusable across different agents within the network.
E). A single NAE agent can be used by multiple NAE scripts.
This is also true, as an individual NAE agent can run multiple scripts to monitor and analyze different aspects of the network.
NEW QUESTION # 90
Your Aruba CX 6300 VSF stack has OSPF adjacency over SVI 10 with LAG 1 to a neighboring device The following configuration was created on the switch:
Answer: D
Explanation:
Explanation
OSPF (Open Shortest Path First) is a routing protocol that uses link-state information to calculate the best path to each destination in the network. OSPF establishes adjacencies with neighboring routers to exchange routing information and maintain a consistent view of the network topology1.
To establish an OSPF adjacency, the routers need to have some common parameters, such as the area ID, the network type, the hello interval, the dead interval, and the authentication method2. The routers also need to have a matching subnet mask on the interface that connects them3.
In this case, the Aruba CX 6300 VSF stack has an SVI (Switched Virtual Interface) on VLAN 10 with an IP address of 10.1.1.1/24 and a LAG (Link Aggregation Group) on port 1/1/1 and port 2/1/1 that connects to a neighboring device. The SVI is configured with OSPF area 0 and network type broadcast. The LAG is configured with OSPF passive mode, which means that it will not send or receive OSPF hello packets.
The neighboring device has an interface with an IP address of 10.1.1.2/24 and a LAG on port 1/0/1 and port
2/0/1 that connects to the Aruba CX 6300 VSF stack. The interface is configured with OSPF area 0 and network type broadcast.
Since the Aruba CX 6300 VSF stack and the neighboring device have the same area ID, network type, subnet mask, and default hello and dead intervals on their interfaces, they will be able to establish an OSPF adjacency over SVI 10 with LAG 1. The OSPF passive mode on the LAG will not affect the adjacency, because it only applies to the LAG interface, not the SVI interface.
NEW QUESTION # 91
You are deploying Aruba CX 6300's with the customers requirement to only allow one (1) VoIP phone and one (1) device.
The following local role gets assigned to the phone
port-access rote VoIP device-traffic-class voice
What set of commands best fits this requirement?
Answer: C
Explanation:
Aruba CX 6300 switches support various features to control the port access for different types of devices, such as client mode, device mode, and multidomain mode. These features can help limit the number of clients that can connect to a port and prevent unauthorized devices from accessing the network.
This is because option C shows how to configure the client limit and the auth-mode for a specific port using the interface command and the aaa authentication port-access command. The client limit specifies the maximum number of clients that can connect to a port. The auth-mode specifies the authentication mode for the port. In this case, option C sets both parameters to multi-domain mode, which allows only one voice device and one data device to be authenticated on a port
1. https://www.arubanetworks.com/techdocs/AOS-CX/10.10/HTML/monitoring_6300-6400/Content/Chp_LEDs/fro-pan-led-630.htm
2: https://www.arubanetworks.com/products/switches/6300-series/
3: https://www.arubanetworks.com/techdocs/AOS-CX/10.11/HTML/security_6200-6300-6400/Content/Chp_Port_acc/Port_acc_gen_cmds/aaa-aut-por-acc-aut-mod-fl-109.htm
NEW QUESTION # 92
......
Our HPE7-A01 study materials can improves your confidence for real HPE7-A01 exam and will help you remember the exam questions and answers that you will take part in. You can choose the version which suits you mostly. Our HPE7-A01 exam torrents simplify the important information and seize the focus to make you master the HPE7-A01 Test Torrent in a short time. To gain a comprehensive understanding of our HPE7-A01 study materials, you have to look at the introduction of our product firstly if you free download the demo of our HPE7-A01 exam questions.
HPE7-A01 Dumps Collection: https://www.getcertkey.com/HPE7-A01_braindumps.html
P.S. Free & New HPE7-A01 dumps are available on Google Drive shared by Getcertkey: https://drive.google.com/open?id=1IRVwfiIb5jQwyA1mCZWXO326LAdbQSrh