P.S. Free 2026 Palo Alto Networks SD-WAN-Engineer dumps are available on Google Drive shared by Actual4Cert: https://drive.google.com/open?id=17Q2hGl1KWbO2CTRGjbGBCNf-0_vutJCa
We have tens of thousands of supporters around the world eager to pass the exam with our SD-WAN-Engineer learning guide which are having a steady increase on the previous years. Exam candidates around the world are longing for learning from our practice materials. If you want to have an outline and brief understanding of our SD-WAN-Engineer Preparation materials we offer free demos for your reference. You can have a look of our SD-WAN-Engineer exam questions for realistic testing problems in them.
| Certification Vendor: | Palo Alto Networks |
|---|---|
| Exam Name: | Palo Alto Networks Certified SD-WAN Engineer |
| Exam Number: | SD-WAN-Engineer |
| Certificate Validity Period: | 2 years |
| Exam Format: | Multiple choice, Scenario-based |
| Exam Duration: | 90 minutes |
| Available Languages: | English |
| Related Certifications: | Network Security Professional Security Service Edge (SSE) Engineer |
| Sample Questions: | Palo Alto Networks SD-WAN-Engineer Sample Questions |
| Exam Way: | Online (Proctored) or Pearson VUE Test Center |
| Pre Condition: | Recommended: Network Security Professional certification or equivalent experience. |
| Official Syllabus URL: | https://www.paloaltonetworks.com/services/education/sd-wan-engineer |
>> SD-WAN-Engineer Exam Quizzes <<
Palo Alto Networks SD-WAN-Engineer Exam is a very hot exam. Although it is difficult to pass the exam, the identification of entry point will make you easy to pass your exam. Actual4Cert practice test dumps are your best choice and hit rate is up to 100%. And our exam dumps can help you solve any questions of SD-WAN-Engineer exam. As long as you carefully study the questions in the dumps, all problems can be solved. Purchasing Actual4Cert certification training dumps, we provide you with free updates for a year. Within a year, as long as you want to update the dumps you have, you can get the latest version. Try it and see for yourself.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 56
An ION 3000 device at a remote branch has suffered a critical hardware failure and must be replaced via the RMA process. The administrator has received the replacement unit.
What is the correct procedure to transfer the configuration and license from the defective unit to the replacement unit to ensure minimal downtime and retention of historical data?
Answer: A
Explanation:
Comprehensive and Detailed Explanation
The RMA replacement process in Prisma SD-WAN is designed to be seamless, leveraging the decoupling of logical configuration from physical hardware.
Replace Device Workflow: The administrator should use the "Replace Device" (or RMA) function within the portal. This workflow allows you to select the "Defective" device (old serial) and the "Replacement" device (new serial).
Configuration Transfer: Once executed, the system automatically binds the existing Device Shell (which contains all interface configs, routing policies, and site associations) to the new hardware's serial number. The new device, once connected to the internet, will "call home," identify itself, and download the exact configuration of the previous unit.
License Transfer: While the configuration moves automatically, the Support License transfer typically requires a specific step in the Customer Support Portal (CSP) or happens automatically if processed as a formal RMA order. Options A and D are incorrect because they involve manual reconfiguration, which is unnecessary and error-prone. Option C is incorrect as the ION platform relies on cloud-based config management, not local USB backups for hardware swaps.
NEW QUESTION # 57
During the Zero Touch Provisioning (ZTP) process of a new ION device at a branch site, which interface ports are supported by default to request an IP address via DHCP and reach the Prisma SD-WAN controller for claiming?
Answer: A
Explanation:
Comprehensive and Detailed Explanation
For a successful Zero Touch Provisioning (ZTP) experience, the ION device must be able to obtain an IP address and reach the internet immediately upon boot-up.
According to Palo Alto Networks hardware guides, the Controller Port (often labeled specifically as "CONTROLLER" on models like the ION 3000/7000/9000) is pre-configured to act as a DHCP client by default. It is the preferred interface for the initial "call home" process.
However, for smaller desktop models (like the ION 1000/2000/1200 series) or scenarios where a dedicated management network is not available, the device firmware is also configured to attempt DHCP client requests on Port 1 (often labeled as Internet 1 or simply 1).
Connecting the ISP circuit to any random port (like Port 4 or a LAN port) will not work for ZTP because those interfaces are not pre-configured as DHCP clients in the factory default state. Therefore, the installer must ensure the internet uplink is connected to either the dedicated Controller port or Port 1/Internet 1 to ensure the device can resolve the controller FQDN and download its configuration.
NEW QUESTION # 58
Two branch sites, "Branch-A" and "Branch-B", are both behind active NAT devices (Source NAT) on their local internet circuits.
What requirement must be met for these two branches to successfully establish a direct Dynamic VPN (ION- to-ION) tunnel over the internet?
Answer: D
Explanation:
Comprehensive and Detailed Explanation
Prisma SD-WAN supports Dynamic VPNs (Branch-to-Branch) even when both endpoints are behind Source NAT (e.g., typical broadband connections).
To achieve this, the ION devices utilize standard NAT Traversal techniques, specifically leveraging STUN (Session Traversal Utilities for NAT).
* Discovery: Each ION communicates with the Cloud Controller (which acts as a STUN server/signaling broker). Through this communication, the controller observes the public IP and Port that the ION's traffic is coming from (the post-NAT address).
* Signaling: The controller shares this public reachability information with the peer ION.
* Hole Punching: The IONs then attempt to initiate connections to each other's discovered public IP
/Port. This "UDP Hole Punching" allows them to establish a direct IPSec tunnel through the NAT devices without requiring static 1:1 NAT mapping or manual port forwarding on the provider routers, enabling mesh connectivity in commodity internet environments.
NEW QUESTION # 59
What does Prisma SD-WAN use for monitoring and operations to deliver flow data and application visibility?
Answer: A
Explanation:
Prisma SD-WAN is built on an application-defined fabric that prioritizes deep visibility into network traffic and application performance.1 To deliver the high-fidelity flow data and application visibility required for modern operations, Prisma SD-WAN utilizes IPFIX (Internet Protocol Flow Information Export).2 IPFIX is a standardized protocol based on NetFlow v9 that allows for the export of IP flow information from network devices to a collector or management system.3 In the Prisma SD-WAN architecture, ION devices act as the exporters.4 Because the system is application- aware, it doesn't just export basic 5-tuple information (source/destination IP, ports, and protocol); it exports rich metadata including application IDs, performance metrics (latency, jitter, packet loss), and path information. This allows the Prisma SD-WAN Controller and the associated Analytics engine to reconstruct a complete picture of every flow in the network.
While other protocols like SNMPv3 are supported for basic device health monitoring (such as CPU or interface status) and ADEM (Autonomous Digital Experience Management) provides end-to-end visibility for mobile users or SASE-connected branches, IPFIX is the primary "engine" for flow-level data across the SD-WAN fabric. Unlike traditional IP SLA, which relies on synthetic probes, the IPFIX-based monitoring in Prisma SD-WAN uses real-time application traffic to assess performance. This ensures that the visibility provided in the Flow Browser and Analytics dashboards accurately reflects the actual user experience, enabling granular troubleshooting and proactive capacity planning.
NEW QUESTION # 60
Site templates are to be used for the large-scale deployment of 100 Prisma SD-WAN branch sites across different regions.
Which two statements align with the capabilities and best practices for Prisma SD-WAN site templates?
(Choose two.)
Answer: C,D
Explanation:
Comprehensive and Detailed Explanation
Site Templates (often referred to as Site Configuration Templates) are a critical tool for the Zero Touch Provisioning (ZTP) of large-scale deployments in Prisma SD-WAN.
1. Device Pre-staging (Statement C):
One of the primary capabilities of Site Templates is the creation of Device Shells. A device shell is a configuration container that exists in the controller before the physical hardware is installed or connected. By using a template, an administrator can pre-provision the entire configuration (interfaces, routing, subnets) for the "Site" and "Element" (Device). When the physical ION device is later connected to the internet and claimed (associated with the shell via its Serial Number), it immediately inherits this pre-staged configuration, enabling a true "plug-and-play" deployment.
2. Mandatory Variables (Statement B):
To successfully instantiate a functional site from a generic template, specific unique identifiers are required in the variable data set (typically a CSV file).
* Site Name: Identifies the location in the portal.
* ION Software Version: Ensures the device boots to the specific validated code version required for the deployment, preventing inconsistencies.
* ION Serial Number / Device Name: Required to bind the logical configuration (Shell) to the physical hardware. Even if the serial is added later during the claim process, the structure of the template and the deployment workflow mandates these variables to ensure the device can be uniquely identified and managed within the fabric.
Note on Option D: While it is technically possible to re-deploy a template, the Best Practice for "Day 2" operations (updating or modifying configuration after deployment) is to use Prisma SD-WAN Stacks (Network Stacks, Security Stacks, etc.). Stacks allow for granular, policy-based updates across multiple sites without the destructive or rigid nature of re-applying a full site initialization template. Therefore, D is not the aligned best practice.
NEW QUESTION # 61
......
New SD-WAN-Engineer Test Guide: https://www.actual4cert.com/SD-WAN-Engineer-real-questions.html
BONUS!!! Download part of Actual4Cert SD-WAN-Engineer dumps for free: https://drive.google.com/open?id=17Q2hGl1KWbO2CTRGjbGBCNf-0_vutJCa