Prominent Features of VCE4Dumps Juniper JN0-351 Practice Test Questions

P.S. Free 2026 Juniper JN0-351 dumps are available on Google Drive shared by VCE4Dumps: https://drive.google.com/open?id=1rHleLYx__fT2ajmmR_mW8q6b0k3ksab5

The VCE4Dumps is one of the leading platforms that have been offering valid, updated, and real Channel Partner Program JN0-351 exam dumps for many years. The Channel Partner Program Enterprise Routing and Switching, Specialist (JNCIS-ENT) JN0-351 Practice Test questions offered by the VCE4Dumps are designed and verified by experienced Enterprise Routing and Switching, Specialist (JNCIS-ENT) JN0-351 certification exam trainers.

Juniper JN0-351 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Tunnels: The fundamentals of IP tunneling are emphasized, highlighting their requirements and functionalities. Mastery in configuring, monitoring, and troubleshooting tunnels equips professionals to meet the demands of the JN0-351 exam.
Topic 2
  • Layer 2 Switching or VLANs: This topic deepens the understanding of Layer 2 switching operations within the Junos OS, including VLAN concepts and benefits. Experienced networking professionals gain insights into configuration, monitoring, and troubleshooting techniques essential for network segmentation and efficiency.
Topic 3
  • Spanning Tree: Networking professionals explore the principles and advantages of the Spanning Tree Protocol (STP) to ensure loop-free topologies in Layer 2 networks.
Topic 4
  • High Availability: This topic covers the importance and application of high availability within Junos OS environments. Knowledge in configuring and managing these components is critical for ensuring robust and uninterrupted network operations, aligning with exam expectations.
Topic 5
  • Protocol Independent Routing: An essential domain for understanding routing components outside protocol dependencies, this topic enhances expertise in configuring, monitoring, and troubleshooting critical elements.
Topic 6
  • IS-IS: Aspiring Juniper networking professionals enhance their understanding of IS-IS routing protocols. This topic equips candidates with the knowledge to configure and monitor IS-IS systems, addressing specific exam challenges and practical applications.
Topic 7
  • BGP: This topic focuses on the operational and conceptual elements of BGP, a cornerstone in enterprise networks.

>> JN0-351 Valid Test Braindumps <<

Cost-Effective and Updated Juniper JN0-351 Dumps Practice Material

Even you have no basic knowledge about the JN0-351 study materials. You still can pass the exam with our help. The key point is that you are serious on our JN0-351 exam questions and not just kidding. Our JN0-351 practice engine can offer you the most professional guidance, which is helpful for your gaining the certificate. And our JN0-351 learning guide contains the most useful content and keypoints which will come up in the real exam.

Juniper Enterprise Routing and Switching, Specialist (JNCIS-ENT) Sample Questions (Q72-Q77):

NEW QUESTION # 72
Which two statements are true about the default VLAN on Juniper switches? (Choose two.)

Answer: B,D

Explanation:
On Juniper switches, the default VLAN is set to a VLAN ID of 1 by default. This means that all interfaces on the switch are members of VLAN until they are specifically assigned to another VLAN. Therefore, option A is correct.
The default VLAN ID can be changed. This allows network administrators to configure the switch to use a different VLAN as the default, if necessary. Therefore, option D is correct.


NEW QUESTION # 73
You have two OSPF routers forming an adjacency. R1 has a priority of 32 and a router ID of 192.168.1.2. R2 has a priority of 64 and a router ID of 192.168.1.1. The routers were started at the same time and all other OSPF settings are the default settings.
Which statement is correct in this scenario?

Answer: A

Explanation:
Explanation
In OSPF, the Designated Router (DR) and Backup Designated Router (BDR) are elected based on the priority of the routers1. The router with the highest priority becomes the DR, and the router with the second highest priority becomes the BDR1. If there is a tie in priority, then the router with the highest Router ID is chosen1.
In this scenario, R2 has a higher priority (64) than R1 (32), so R2 will become the DR1. Since R1 has the second highest priority, it will become the BDR1. Therefore, option D is correct.


NEW QUESTION # 74
Which two statements are correct about Integrated Routing and Bridging (IRB) interfaces in Junos OS? (Choose two.)

Answer: C,D

Explanation:
An Integrated Routing and Bridging (IRB) interface provides a Layer 3 gateway for a Layer 2 VLAN, allowing devices within that VLAN to route traffic to other VLANs or networks. Each VLAN requiring inter-VLAN routing is typically associated with its own IRB interface, configured with an IP address that serves as the default gateway for hosts in that VLAN.


NEW QUESTION # 75
Exhibit.

What is the management IP address of the device shown in the exhibit?

Answer: A


NEW QUESTION # 76
Which three protocols support BFD? (Choose three.)

Answer: A,B,D

Explanation:
BFD is a protocol that can be used to quickly detect failures in the forwarding path between two adjacent routers or switches. BFD can be integrated with various routing protocols and link aggregation protocols to provide faster convergence and fault recovery.
According to the Juniper Networks documentation, the following protocols support BFD on Junos OS devices
1 :
* BGP: BFD can be used to monitor the connectivity between BGP peers and trigger a session reset if a failure is detected. BFD can be configured for both internal and external BGP sessions, as well as for IPv4 and IPv6 address families 2 .
* OSPF: BFD can be used to monitor the connectivity between OSPF neighbors and trigger a state change if a failure is detected. BFD can be configured for both OSPFv2 and OSPFv3 protocols, as well as for point-to-point and broadcast network types 3 .
* LACP: BFD can be used to monitor the connectivity between LACP members and trigger a link state change if a failure is detected. BFD can be configured for both active and passive LACP modes, as well as for static and dynamic LAGs 4 .
Other protocols that support BFD on Junos OS devices are:
* IS-IS: BFD can be used to monitor the connectivity between IS-IS neighbors and trigger a state change if a failure is detected. BFD can be configured for both level 1 and level 2 IS-IS adjacencies, as well as for point-to-point and broadcast network types.
* RIP: BFD can be used to monitor the connectivity between RIP neighbors and trigger a route update if a failure is detected. BFD can be configured for both RIP version 1 and version 2 protocols, as well as for IPv4 and IPv6 address families.
* VRRP: BFD can be used to monitor the connectivity between VRRP routers and trigger a priority change if a failure is detected. BFD can be configured for both VRRP version 2 and version 3 protocols, as well as for IPv4 and IPv6 address families.
The protocols that do not support BFD on Junos OS devices are:
* RSTP: RSTP is a spanning tree protocol that provides loop prevention and rapid convergence in layer 2 networks. RSTP does not use BFD to detect link failures, but relies on its own hello mechanism that sends BPDU packets every 2 seconds by default.
* FTP: FTP is an application layer protocol that is used to transfer files between hosts over a TCP connection. FTP does not use BFD to detect connection failures, but relies on TCP's own retransmission and timeout mechanisms.
References:
1 : [Configuring Bidirectional Forwarding Detection] 2 : [Configuring Bidirectional Forwarding Detection for BGP] 3 : [Configuring Bidirectional Forwarding Detection for OSPF] 4 : [Configuring Bidirectional Forwarding Detection for Link Aggregation Control Protocol] : [Configuring Bidirectional Forwarding Detection for IS-IS] : [Configuring Bidirectional Forwarding Detection for RIP] : [Config uring Bidirectional Forwarding Detection for VRRP] : [Understanding Rapid Spanning Tree Protocol] : [Understanding FTP]


NEW QUESTION # 77
......

Windows computers support the desktop-based Juniper JN0-351 exam simulation software. These tests create scenarios that are similar to the actual JN0-351 examination. By sitting in these environments, you will be able to cope with exam anxiety. As a result, you will appear in the JN0-351 final test confidently.

Question JN0-351 Explanations: https://www.vce4dumps.com/JN0-351-valid-torrent.html

P.S. Free & New JN0-351 dumps are available on Google Drive shared by VCE4Dumps: https://drive.google.com/open?id=1rHleLYx__fT2ajmmR_mW8q6b0k3ksab5