NSE7_OTS-7.2題庫資訊，NSE7_OTS-7.2資訊

順便提一下，可以從雲存儲中下載Fast2test NSE7_OTS-7.2考試題庫的完整版：https://drive.google.com/open?id=1wENQ54kOO4Wk0_IfUG7a67RmqRjBcdSd

你只需要獲得Fast2test提供的Fortinet NSE7_OTS-7.2認證考試的練習題和答案做模擬測試，您是可以順利通過Fortinet NSE7_OTS-7.2 認證考試的。如果你有了Fortinet NSE7_OTS-7.2 認證證書，你的職業水準就超出很大部分人，你就可以獲得很大職位晉升機會。將Fast2test的產品加入購物車吧，Fast2test可以在互聯網上為你提供24小時線上客戶服務。

Fortinet NSE7_OTS-7.2 Exam Syllabus Topics:

Section	Objectives
OT Network Protection	- Identify industrial protocols and their signatures - Implement IPS for robust OT network security - Deploy application control strategies for industrial applications
Asset Management	- Explain OT architecture leveraging Fortinet products - Clarify network visibility with FortiNAC - Implement device detection using FortiGate - Configure OT network security fabric
Monitoring and Risk Assessment	- Security automation with FortiAnalyzer and FortiSIEM - Implement logging and monitoring through FortiAnalyzer and FortiSIEM - Risk assessment and management - Provide insights into FortiSIEM rules and incidents
Network Access Control	- Apply authentication measures to govern device access - Elaborate on role-based authentication - Illuminate industrial Ethernet protocols - Explain internal segmentation implementation for OT networks

>> NSE7_OTS-7.2題庫資訊 <<

最受推薦的的NSE7_OTS-7.2題庫資訊，覆蓋大量的Fortinet認證NSE7_OTS-7.2考試知識點

Fast2test是一個你可以完全相信的網站。Fast2test的Fortinet技術專家為了讓大家可以學到更加高效率的資料一直致力於各種NSE7_OTS-7.2認證考試的研究，從而開發出了更多的考試資料。只要你使用過一次Fast2test的資料，你就肯定還想用第二次。因為Fast2test不但給你提供最好的資料，而且為你提供最優質的服務。如果你對我們的產品有任何意見都可以隨時提出，因為我們不僅以讓廣大考生輕鬆通過NSE7_OTS-7.2考試為宗旨，更把為大家提供最好的服務作為我們的目標。

最新的 NSE 7 Network Security Architect NSE7_OTS-7.2 免費考試真題 (Q89-Q94):

問題 #89
in an operation technology (OT) network FortiAnalyzer is used to receive and process logs from responsible FortiGate devices Which statement about why FortiAnalyzer is receiving and processing multiple tog messages from a given programmable logic controller (PLC) or remote terminal unit (RTU) is true'?

A. To determine which type of messages from the PLC or RTU causes issues in the plant
B. To track external threats and prevent them attacking the OT network
C. To isolate PLCs or RTUs in the event of external attacks
D. To help OT administrators troubleshoot and diagnose the OT network

答案：B

問題 #90
What is the primary objective of implementing SD-WAN in operational technology (OT) networks'?

A. Replace standard links with lower cost connections
B. Reduce security risk and threat attacks
C. Remove centralized network security policies
D. Enhance network performance of OT applications

答案：D

問題 #91
The OT network analyst runs different level of reports to quickly explore threats that exploit the network.
Such reports can be run on all routers, switches, and firewalls. Which FortiSIEM reporting method helps to identify these type of exploits of image firmware files?

A. Threat hunting reports
B. CMDB reports
C. OT/loT reports
D. Compliance reports

答案：B

問題 #92
Refer to the exhibit. In the topology shown in the exhibit, both PLCs can communicate directly with each other without going through the firewall.
What can be done to improve the security in this situation?

A. Configure PLCs to use the IEEE802.1Q protocol to communicate with each other.
B. Implement a solution that expands VLAN capabilities from Layer 2 to Layer 3.
C. Create firewall policies in the switch to secure traffic between PLCs.
D. Implement micro-segmentation.

答案：D

解題說明：
Micro-segmentation forces PLC-to-PLC traffic to traverse a security device (firewall/ISFW), so policies and inspection can be applied instead of allowing unrestricted Layer-2 communication.

問題 #93
As an OT administrator, it is important to understand how industrial protocols work in an OT network. Which communication method is used by the Modbus protocol?

A. It uses OSI Layer 2 and both the primary/secondary devices send data based on a matching token ring.
B. It uses OSI Layer 2 and the secondary device sends data based on request from primary device.
C. It uses OSI Layer 2 and both the primary/secondary devices always send data during the communication.
D. It uses OSI Layer 2 and the primary device sends data based on request from secondary device.

答案：B

解題說明：
Modbus is master/slave: the master (primary) polls; a slave (secondary) replies only when requested. That fits "secondary sends data based on request from primary device."

問題 #94
......

如果你參加Fortinet NSE7_OTS-7.2認證考試，你選擇Fast2test就是選擇成功！祝你好運。

NSE7_OTS-7.2資訊: https://tw.fast2test.com/NSE7_OTS-7.2-premium-file.html

P.S. Fast2test在Google Drive上分享了免費的、最新的NSE7_OTS-7.2考試題庫：https://drive.google.com/open?id=1wENQ54kOO4Wk0_IfUG7a67RmqRjBcdSd