What's more, part of that ITExamSimulator EDGE-Expert dumps now are free: https://drive.google.com/open?id=1lFRhOAQ7czOKUAJOMHBjf209k6ozJzYW
After your purchase of EDGE-Expert learning engine, our system will send a link to your email in 5 to 10 minutes. You can contact our staff anytime and anywhere during the learning process. The staff of EDGE-Expert study materials is online 24 hours a day, seven days a week. Our staff is really serious and responsible. We just want to provide you with the best service. I hope you enjoy using EDGE-Expert Exam Materials.
| Section | Objectives |
|---|---|
| Topic 1: Certification Process | - Verification and audit process - Project registration and documentation requirements |
| Topic 2: Resource Efficiency Metrics | - Materials efficiency and embodied energy basics - Water efficiency strategies and benchmarks - Energy efficiency concepts and savings calculation |
| Topic 3: EDGE Green Building Fundamentals | - Sustainable design principles - Overview of EDGE system and certification framework |
| Topic 4: EDGE Software Application | - Interpreting performance results and compliance - Project modeling and inputs in EDGE software |
>> EDGE-Expert Key Concepts <<
Through years of persistent efforts and centering on the innovation and the clients-based concept, our company has grown into the flagship among the industry. Our company struggles hard to improve the quality of our EDGE-Expert study materials and invests a lot of efforts and money into the research and innovation of our EDGE-Expert Study Materials. Our brand fame in the industry is like the Microsoft in the computer industry, Google in the internet industry and Apple in the cellphone industry. High quality, considerate service, constant innovation and the concept of customer first are the four pillars of our company.
NEW QUESTION # 19
Which of the following heating systems uses Coefficient of Performance (COP) as a measure of efficiency in the EDGE software?
Answer: C
Explanation:
In EDGE, the Coefficient of Performance (COP) is used to measure the efficiency of heating systems that produce heat using a refrigeration cycle, such as heat pumps. The EDGE Methodology Report specifies: "The Coefficient of Performance (COP) is used in EDGE to evaluate the efficiency of heat pumps, including ground source heat pumps, where it is defined as the ratio of thermal output to electrical input. This metric is not applied to direct heating systems like electric heaters or boilers" (EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics). Option C, ground source heat pump, fits this description as it operates using a refrigeration cycle to transfer heat, and its efficiency is measured by COP in EDGE. Option A (electric heater) has an efficiency typically measured as 100% (or COP of 1), but EDGE does not use COP for such systems, as noted: "Electric heaters are assumed to have a fixed efficiency in EDGE, not evaluated via COP" (EDGE User Guide, Section 4.2: Energy Efficiency Measures). Option B (condensing boiler) uses thermal efficiency (%), not COP, as per: "Boilers in EDGE are assessed by their thermal efficiency, not COP" (EDGE Methodology Report Version 2.0, Section 5.2: Heating Systems). Option D (sensible heat recovery from exhaust air) is a heat recovery method, not a heating system, and does not use COP: "Heat recovery systems are evaluated by their heat recovery effectiveness, not COP" (EDGE User Guide, Section 4.3:
Ventilation Measures). Thus, ground source heat pump (Option C) is the correct choice.
Reference: EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics, Section 5.2:
Heating Systems; EDGE User Guide Version 2.1, Section 4.2: Energy Efficiency Measures, Section 4.3:
Ventilation Measures.
NEW QUESTION # 20
Which of the following measures will impact energy, water, and materials in an air-conditioned hospital with a water-cooled chiller?
Answer: C
Explanation:
In EDGE, measures are evaluated for their impact on energy, water, and embodied energy in materials, the three core pillars of the standard. For an air-conditioned hospital with a water-cooled chiller, the measure must affect all three areas to be the correct answer. The EDGE User Guide provides detailed descriptions of each measure's impact: "Variable speed drive (VSD) pumps in HVAC systems, such as those used in water- cooled chillers, impact energy by reducing electricity consumption through load modulation, water by optimizing the chiller's cooling water circulation (reducing water use in the cooling tower), and materials because their installation may involve additional components with embodied energy, such as the VSD unit itself" (EDGE User Guide, Section 4.2: Energy Efficiency Measures). Option C, variable speed drive pumps, thus impacts all three areas: energy (reduced electricity use), water (less cooling tower water loss), and materials (embodied energy in the VSD equipment). Option A (insulation of the roof) affects energy (reduced cooling load) and materials (embodied energy in insulation), but not water: "Roof insulation reduces energy demand but does not directly impact water consumption" (EDGE User Guide, Section 4.1: Insulation Measures). Option B (water-efficient urinals) impacts water (reduced consumption) and potentially materials (embodied energy in fixtures), but not energy: "Water-efficient urinals save water but have no direct energy impact in EDGE calculations" (EDGE User Guide, Section 5.2: Water Efficiency Measures). Option D (water- efficient dishwashers) also affects water and materials, but not energy in this context: "Water-efficient dishwashers reduce water use, but their energy impact is minimal unless they include hot water savings, which is not specified for hospital dishwashers in EDGE" (EDGE Methodology Report Version 2.0, Section
4.2: Water Savings Calculations). The EDGE Methodology Report further confirms: "VSD pumps in water- cooled chillers are unique in affecting all three EDGE metrics-energy through efficiency, water through reduced cooling tower evaporation, and materials through the embodied energy of the equipment" (EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics). Thus, variable speed drive pumps (Option C) is the measure impacting energy, water, and materials.
Reference:EDGE User Guide Version 2.1, Section 4.2: Energy Efficiency Measures, Section 4.1: Insulation Measures, Section 5.2: Water Efficiency Measures; EDGE Methodology Report Version 2.0, Section 5.1:
Energy Efficiency Metrics, Section 4.2: Water Savings Calculations.
NEW QUESTION # 21
Company A is developing a logistic center of 15,000 m² in Kenya. The project consists of 14,000 m² of warehouse space, 500 m² of office space, and 500 m² of technical areas mechanical and electrical. The company is looking for a single certification for the project. Which EDGE Building type should be selected for the certification?
Answer: A
Explanation:
In the CBCI EDGE curriculum, the correct building type in the EDGE software is selected based on the project's dominant functional use, because the baseline assumptions for energy and water are driven by occupancy patterns, internal loads, operating hours, and typical system types for that use. In this project, the overwhelming majority of area is warehouse space: 14,000 m² out of 15,000 m², while office and technical areas together represent only 1,000 m².
EDGE does not treat "Logistic" as a separate building type for modeling; logistics centers are typically modeled under the Industrial category because warehouses and distribution facilities have industrial-like operational characteristics and baselines. Selecting Office would misrepresent schedules and plug loads and would distort the baseline comparison, leading to inaccurate savings results. Retail is also inappropriate because it assumes customer-facing operating hours, lighting levels, and HVAC patterns different from warehouses.
For a single certification covering the whole development, the appropriate approach is to select the building type that best matches the primary use and area share. Therefore, the correct EDGE building type for this logistics center is Industrial.
NEW QUESTION # 22
Is it possible to be both the EDGE Expert and Auditor on a project?
Answer: A
Explanation:
The EDGE framework strictly enforces separation of roles to maintain integrity and avoid conflicts of interest during the certification process. The EDGE Expert and Auditor Protocols explicitly address this issue: "An individual cannot serve as both the EDGE Expert and EDGE Auditor on the same project. This separation ensures independence in the audit process, as the Expert's role as a consultant advising the project team could bias the Auditor's objective assessment of the project's compliance with EDGE standards" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). Option A, no, an EDGE Expert cannot be the EDGE Auditor on the same project, directly reflects this rule. Option B (no, even if the Certifier agrees to special terms) adds an unnecessary condition, as the protocols do not allow exceptions: "No exceptions are permitted for an individualto serve in both roles on the same project, regardless of agreements or special terms" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). Option C (yes, in all cases) is incorrect, as it contradicts the conflict-of-interest rules: "Allowing dual roles in all cases would undermine the impartiality required for certification" (EDGE Certification Protocol, Section 3.1: Certification Process). Option D (yes, if no other Auditors are available) is also incorrect, as availability does not override the conflict-of-interest prohibition: "Even if no other Auditors are available, the roles must remain separate; the Client must find a different Auditor or delay the audit" (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). The EDGE User Guide reinforces this principle: "The separation of Expert and Auditor roles ensures a fair and unbiased certification process, protecting the credibility of EDGE certification" (EDGE User Guide, Section
6.4: Working with EDGE Experts). Thus, it is not possible to be both (Option A).
Reference:EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest, Section 4.1: Audit Process; EDGE Certification Protocol, Section 3.1: Certification Process; EDGE User Guide Version 2.1, Section 6.4:
Working with EDGE Experts.
NEW QUESTION # 23
The COP of the water-cooled chiller is 6, and the cooling thermal load is 3516 W. What is the power rating of the chiller?
Answer: A
Explanation:
The Coefficient of Performance (COP) is used in EDGE to calculate the electrical power input required for a given thermal output of a chiller. The EDGE Methodology Report defines COP as: "COP is the ratio of thermal output to electrical input, expressed as COP = Thermal Output / Electrical Input. To find the electrical input (power rating), rearrange the formula: Electrical Input = Thermal Output / COP" (EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics). Given the COP of the water-cooled chiller as 6 and the cooling thermal load (thermal output) as 3516 W, the power rating is calculated as follows: Electrical Input = 3516 W / 6 = 586 W. Option A, 586 W, matches this calculation. Option B (3510 W) is incorrect, as it is slightly less than the thermal output, implying an unrealistic COP near 1. Option C (3522 W) is slightly above the thermal output, also incorrect. Option D (21096 W) is the result of multiplying the thermal output by the COP (3516 × 6), which is the inverse of the correct calculation. The EDGE User Guide confirms: "For a chiller with a COP of 6, the electrical input is one-sixth of the thermal output, ensuring energy efficiency is accurately assessed" (EDGE User Guide, Section 4.2: Energy Efficiency Measures). Thus, the power rating is
586 W (Option A).
Reference:EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics; EDGE User Guide Version 2.1, Section 4.2: Energy Efficiency Measures.
NEW QUESTION # 24
......
EDGE EDGE-Expert certification exam is a very difficult test. Even if the exam is very hard, many people still choose to sign up for the exam. As to the cause, EDGE-Expert exam is a very important test. For IT staff, not having got the certificate has a bad effect on their job. EDGE EDGE-Expert certificate will bring you many good helps and also help you get promoted. In a word, this is a test that will bring great influence on your career. Such important exam, you also want to attend the exam.
EDGE-Expert Reliable Test Cost: https://www.itexamsimulator.com/EDGE-Expert-brain-dumps.html
DOWNLOAD the newest ITExamSimulator EDGE-Expert PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1lFRhOAQ7czOKUAJOMHBjf209k6ozJzYW