P.S. Free & New 350-101 dumps are available on Google Drive shared by Real4test: https://drive.google.com/open?id=1QhEmKTCrIDjfcGoCKjkwAaYF27YT9b36
Annual test syllabus is essential to predicate the real 350-101 questions. So you must have a whole understanding of the test syllabus. After all, you do not know the 350-101 exam clearly. It must be difficult for you to prepare the 350-101 exam. Then our 350-101 Study Materials can give you some guidance for our professional experts have done all of these above matters for you by collecting the most accurate questions and answers. And you can have a easy time to study with them.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
It is a truth universally acknowledged that the exam is not easy but the related 350-101 certification is of great significance for workers in this field, I am glad to tell you that our company aims to help you to pass the 350-101 examination as well as gaining the related certification in a more efficient and simpler way. During nearly ten years, our 350-101 Exam Questions have met with warm reception and quick sale in the international market. Our 350-101 study materials are not only as reasonable priced as other makers, but also they are distinctly superior.
NEW QUESTION # 123 
Refer to the exhibit. A client authenticates via 802.1X against an ISE server that is configured to return a specific VLAN ID (VLAN 100) via an attribute value pair. However, the administrator notices that the client is placed in the wrong VLAN (VLAN 50). What must the administrator implement to resolve the issue?
Answer: A
Explanation:
In this scenario, the client is placed in the wrong VLAN (VLAN 50) even though the ISE server is configured to assign VLAN 100. The key part of the issue is that the VLAN assignment returned by ISE is not being applied correctly.
Option A: "Configure the policy profile to allow ISE to override the VLAN."This is the correct answer. The policy profile on the Wireless LAN Controller (WLC) should be configured to allow the ISE server's VLAN assignment to override the locally configured VLAN settings on the WLC. Without this, the WLC might default to its pre-configured VLAN (VLAN 50) instead of the VLAN assigned by ISE (VLAN 100).
Option B: "Configure VLAN 100 as an SVI on the WLC."This option is unnecessary. While an SVI (Switched Virtual Interface) is required to route between VLANs, it is not the cause of the issue here. The problem is that the correct VLAN (VLAN 100) is not being applied to the client, not that the WLC lacks an SVI.
Option C: "Configure VLAN 100 on the trunk ports of the WLC."This option is also not relevant. The issue is not with trunking but with VLAN assignment from ISE. The trunking configuration ensures that VLANs are allowed across ports, but it does not address the client being placed in the wrong VLAN.
Option D: "Configure AAA VLAN enable on the WLAN."This option is not directly related to the issue.
While enabling AAA VLAN can allow for more dynamic VLAN assignments, the core issue is related to overriding the default VLAN setting from ISE, which is handled by configuring the policy profile on the WLC.
Therefore,Option Ais the correct solution, as it ensures the WLC will allow the ISE server's VLAN assignment to override the default VLAN on the WLC, resolving the issue of incorrect VLAN assignment.
NEW QUESTION # 124
What is a benefit of applying TACACS authentication for device access?
Answer: C
Explanation:
TACACS+ is used for device administration, especially for GUI and CLI access to infrastructure platforms such as Cisco Catalyst 9800 WLCs, switches, and routers. Cisco defines TACACS+ as a security application that provides centralized validation for users attempting to access a device or network access server, and it separates authentication, authorization, and accounting functions for administrative control. Cisco ISE device administration documentation further states that TACACS+ is used to control and audit network device configuration, allowing devices to query ISE for administrator authentication and authorization while sending accounting records for logging administrator actions.
Therefore, the primary benefit is streamlined administrator access across platforms. Instead of maintaining local administrator accounts independently on every WLC or network device, TACACS+ enables centralized identity validation, role-based authorization, and consistent audit trails. Option A is incorrect because TACACS+ supports differentiated authorization rather than static grouping. Option B is the opposite of centralized accounting. Option D is inaccurate because TACACS+ is mainly for device administration, whereas client or endpoint network access is typically handled with RADIUS. Reference topics:Wireless Monitoring and Management - AAA for WLC administration, TACACS+ device administration, role-based access, and centralized audit control.
NEW QUESTION # 125
Refer to the exhibit.
An engineer must configure wireless guest networking for a deployment at site A, which requires support for guest VLAN assignment and assignment for wlan guest-network 20. The controller will provide network segregation and restrict access to internal resources. Based on the configuration commands, which action meets the requirements?
Answer: C
Explanation:
The exhibit creates WLAN profileguest-networkwith WLAN ID20and enables web authentication, but it does not yet define the client VLAN or bind the WLAN to a deployable policy. On Catalyst 9800 controllers, the WLAN profile defines SSID and wireless/security characteristics, while thepolicy profiledefines client-facing network policy, including VLAN assignment, AAA, ACLs, and switching behavior. Cisco's web authentication configuration guide states that the policy profile specifies client VLAN, AAA, ACLs, timeout settings, and related policy, and the VLAN is assigned under the policy profile.
The second required object is thepolicy tag, because a policy tag maps the WLAN profile to the policy profile.
Cisco also notes that the default policy tag automatically maps only WLAN IDs1 through 16; WLAN ID17 or highercannot use that default mapping. Since this WLAN is ID 20, a custom policy tag mapping is required.
Mesh bridging, STP, AP group naming, or physical-interface isolation do not complete the Catalyst 9800 WLAN-to-VLAN policy model. Reference topics:Wireless Network Implementation - Catalyst 9800 configuration model, WLAN profiles, policy profiles, policy tags, guest VLAN assignment, and web authentication.
NEW QUESTION # 126
What defines RSSI in radio signal measurements?
Answer: C
Explanation:
RSSI, or Received Signal Strength Indicator, is a measure of the detected power level of a radio signal at the receiver, expressed in dBm. It reflects the strength of the wireless signal received by the client or access point and is a critical metric for assessing coverage, link quality, and roaming decisions. Higher RSSI values (closer to 0 dBm) indicate stronger signals, while lower values (more negative) represent weaker signals. RSSI is used by Cisco wireless controllers and clients to make roaming decisions, select access points, and optimize transmit power levels.
NEW QUESTION # 127
An organization must manage ongoing firmware updates for redundant controllers in the network.
They will use Cisco Catalyst Center for deployment and visibility. The current environment uses centralized and distributed management approaches. Automation and reporting are critical to minimize operational workload. Which method must be used to manage structured update processes and monitor progress throughout the update cycle?
Answer: C
Explanation:
The correct method is software image management workflows, specifically Cisco Catalyst Center Software Image Management, commonly referenced as SWIM. Cisco documents SWIM as the mechanism used to manage software upgrades and maintain consistency of image versions across the network. It provides an image repository, golden-image assignment, image distribution, activation, readiness checks, and scheduled execution. Cisco's wireless automation guidance specifically states that SWIM is used to update Catalyst 9800 Series Wireless Controller software by distributing the image from the Catalyst Center repository to wireless controllers and upgrading the images running on those controllers; both stages can run immediately or be scheduled for a defined maintenance window.
Option C is also validated by Catalyst Center's update-status and workflow views. Cisco documents Image Update Status as the view that shows all update tasks, filters by in-progress, success, or failure, and displays a progress bar for active updates. The workflow view then exposes distribution and activation task status, timing, prechecks, postchecks, checksum verification, and AP pre-image download details. Inventory snapshots and templates do not execute controller firmware upgrades, and "lifecycle workflow" is too generic.
NEW QUESTION # 128
......
When you see other people in different industry who feel relaxed with high salary, do you want to try another field? And is the difficulty of learning a new piece of knowledge often deterring you? It doesn't matter, now 350-101 practice exam offers you a great opportunity to enter a new industry. Our 350-101 learning material was compiled from the wisdom and sweat of many industry experts. And it is easy to learn and understand our 350-101 exam questions.
350-101 New Learning Materials: https://www.real4test.com/350-101_real-exam.html
What's more, part of that Real4test 350-101 dumps now are free: https://drive.google.com/open?id=1QhEmKTCrIDjfcGoCKjkwAaYF27YT9b36