최신버전DOP-C02시험대비인증덤프시험공부자료

참고: Itexamdump에서 Google Drive로 공유하는 무료 2026 Amazon DOP-C02 시험 문제집이 있습니다: https://drive.google.com/open?id=1VNQBjD8pVf_KWddN0WtMWVMGEh69OlVU

Amazon DOP-C02덤프구매에 관심이 있는데 선뜻 구매결정을 하지 못하는 분이라면 사이트에 있는 demo를 다운받아 보시면Amazon DOP-C02시험패스에 믿음이 생길것입니다. Amazon DOP-C02덤프는 시험문제변경에 따라 업데이트하여 항상 가장 최선버전이도록 유지하기 위해 최선을 다하고 있습니다.

Amazon DOP-C02 Exam Syllabus Topics:

Section	Weight	Objectives
Incident and Event Response	18%	- Design and implement event and incident management 1. Design event aggregation and correlation 2. Implement automated incident detection 3. Implement automated response playbooks - Design and implement chaos engineering practices 1. Design resilience testing strategies 2. Implement fault injection experiments (AWS Fault Injection Simulator) 3. Analyze system behavior under failure conditions
Monitoring and Logging	12%	- Design and implement monitoring and observability strategies 1. Implement log aggregation and analysis 2. Design custom metrics and alarms (Amazon CloudWatch) 3. Implement distributed tracing (AWS X-Ray) - Design and implement alerting and incident management 1. Create alarm notification strategies 2. Implement automated incident response 3. Design runbook automation
Policies and Standards Automation	10%	- Design and implement governance strategies 1. Implement approval workflows and automation 2. Implement tagging policies and resource grouping 3. Design cost optimization through policies - Design and implement preventive and detective controls 1. Design and implement security baselines 2. Implement drift detection and remediation 3. Implement AWS Organizations and SCPs
SDLC Automation	22%	- Design and implement CI/CD pipelines 1. Develop CI/CD pipelines considering testing and security requirements 2. Implement deployment strategies (blue-green, canary, rolling) 3. Design failure handling strategies 4. Determine appropriate CI/CD pipeline architecture - Design and implement source code management strategies 1. Determine branching strategies 2. Implement repository configurations and hooks 3. Design code review and approval processes - Design build and test environments 1. Integrate security scanning and compliance checks 2. Design test automation frameworks 3. Implement build environments (isolated, reproducible)
Configuration Management and Infrastructure as Code	22%	- Design and implement configuration management 1. Implement AWS Systems Manager for configuration management 2. Design patch management strategies 3. Implement parameter management (AWS Parameter Store, Secrets Manager) - Design and implement infrastructure as code 1. Develop IaC templates (AWS CloudFormation, Terraform) 2. Design for scalability and repeatability 3. Implement modular and reusable infrastructure components - Implement compliance and configuration monitoring 1. Design remediation automation 2. Implement AWS CloudTrail for auditing 3. Use AWS Config for compliance monitoring - Design and implement data management strategies 1. Implement database migration strategies 2. Design backup and recovery solutions 3. Implement data lifecycle management
High Availability and Disaster Recovery	16%	- Implement data backup and restore strategies 1. Implement validation testing for backups 2. Design point-in-time recovery solutions 3. Implement cross-region replication - Design and implement high availability and scalability 1. Design multi-AZ and multi-region architectures 2. Implement load balancing and traffic management 3. Implement auto scaling strategies - Design and implement disaster recovery strategies 1. Design RTO and RPO based DR solutions 2. Implement multi-region active-active architectures 3. Implement backup and restore mechanisms 4. Implement pilot light and warm standby architectures

>> DOP-C02시험대비 인증덤프 <<

DOP-C02최신버전자료 - DOP-C02최고패스자료

Itexamdump에서 제공하는 제품들은 품질이 아주 좋으며 또 업뎃속도도 아주 빠릅니다 만약 우리가제공하는Amazon DOP-C02인증시험관련 덤프를 구매하신다면Amazon DOP-C02시험은 손쉽게 성공적으로 패스하실 수 있습니다.

최신 AWS Certified Professional DOP-C02 무료샘플문제 (Q430-Q435):

질문 # 430
A company has an application that stores data that includes personally Identifiable Information (Pll) In an Amazon S3 bucket All data Is encrypted with AWS Key Management Service (AWS KMS) customer managed keys. All AWS resources are deployed from an AWS Cloud Formation template.
A DevOps engineer needs to set up a development environment for the application in a different AWS account The data in the development environment's S3 bucket needs to be updated once a week from the production environment's S3 bucket.
The company must not move Pll from the production environment without anonymizmg the Pll first The data in each environment must be encrypted with different KMS customer managed keys.
Which combination of steps should the DevOps engineer take to meet these requirements? (Select TWO )

A. Create a development environment from the CloudFormatlon template in the development account.
Schedule an Amazon EventBridge rule to start the AWS Step Functions state machine once a week
B. Activate Amazon Macie on the S3 bucket In the production account Create an AWS Step Functions state machine to initiate a discovery job and redact all Pll before copying files to the S3 bucket in the development account. Give the state machine tasks decrypt permissions on the KMS key in the production account. Give the state machine tasks encrypt permissions on the KMS key in the development account
C. Set up S3 replication between the production S3 bucket and the development S3 bucket Activate Amazon Macie on the development S3 bucket Create an AWS Step Functions state machine to initiate a discovery job and redact all Pll as the files are copied to the development S3 bucket. Give the state machine tasks encrypt and decrypt permissions on the KMS key in the development account.
D. Set up an S3 Batch Operations job to copy files from the production S3 bucket to the development S3 bucket. In the development account, configure an AWS Lambda function to redact all Pll. Configure S3 Object Lambda to use the Lambda function for S3 GET requests Give the Lambda function's 1AM role encrypt and decrypt permissions on the KMS key in the development account.
E. Create a development environment from the CloudFormation template in the development account.Schedule a cron job on an Amazon EC2 instance to run once a week to start the S3 Batch Operations job.

정답：A,B

설명：
Activate Amazon Macie on the Production S3 Bucket:
* Macie can identify and protect sensitive data such as PII.
* Create a Step Functions state machine to automate data discovery and redaction before copying it to the development environment.
Example Step Functions state machine:
{
"Comment": "Anonymize PII and copy data",
"StartAt": "MacieDiscoveryJob",
"States": {
"MacieDiscoveryJob": {
"Type": "Task",
"Resource": "arn:aws:states:::macie:startClassificationJob",
"End": true
}
}
}
Create a Development Environment from CloudFormation Template:
* Deploy the development environment in a new account using the existing CloudFormation template.
* Schedule an EventBridge rule to start the Step Functions state machine on a weekly basis.
EventBridge rule example:
{
"ScheduleExpression": "rate(7 days)",
"StateMachineArn": "arn:aws:states:<region>:<account-id>:stateMachine:AnonymizeAndCopyData"
}
* By using Macie for data anonymization and Step Functions for automation, you ensure PII is properly handled before data transfer between environments.
References:
* Amazon Macie
* AWS Step Functions
* AWS CloudFormation Templates

질문 # 431
A company needs a strategy for failover and disaster recovery of its data and application. The application uses a MySQL database and Amazon EC2 instances. The company requires a maximum RPO of 2 hours and a maximum RTO of 10 minutes for its data and application at all times.
Which combination of deployment strategies will meet these requirements? (Select TWO.)

A. Set up the application in two AWS Regions. Configure AWS Global Accelerator to point to Application Load Balancers (ALBs) in both Regions. Add both ALBs to a single endpoint group. Use health checks and Auto Scaling groups in each Region.
B. Set up the application in two AWS Regions. Use Amazon Route 53 failover routing that points to Application Load Balancers in both Regions. Use health checks and Auto Scaling groups in each Region.
C. Create an Amazon Aurora global database in two AWS Regions as the data store. In the event of a failure, promote the secondary Region to the primary for the application. Update the application to use the Aurora cluster endpoint in the secondary Region.
D. Create an Amazon Aurora cluster in multiple AWS Regions as the data store. Use a Network Load Balancer to balance the database traffic in different Regions.
E. Create an Amazon Aurora Single-AZ cluster in multiple AWS Regions as the data store. Use Aurora's automatic recovery capabilities in the event of a disaster.

정답：A,C

설명：
Explanation
Short Explanation: To meet the requirements of failover and disaster recovery, the company should use the following deployment strategies:
Create an Amazon Aurora global database in two AWS Regions as the data store. In the event of a failure, promote the secondary Region to the primary for the application. Update the application to use the Aurora cluster endpoint in the secondary Region. This strategy can provide a low RPO and RTO for the data, as Aurora global database replicates data with minimal latency across Regions and allows fast and easy failover12. The company can use the Amazon Aurora cluster endpoint to connect to the current primary DB cluster without needing to change any application code1.
Set up the application in two AWS Regions. Configure AWS Global Accelerator to point to Application Load Balancers (ALBs) in both Regions. Add both ALBs to a single endpoint group. Use health checks and Auto Scaling groups in each Region. This strategy can provide high availability and performance for the application, as AWS Global Accelerator uses the AWS global network to route traffic to the closest healthy endpoint3. The company can also use static IP addresses that are assigned by Global Accelerator as a fixed entry point for their application1. By using health checks and Auto Scaling groups, the company can ensure that their application can scale up or down based on demand and handle any instance failures4.
The other options are incorrect because:
Creating an Amazon Aurora Single-AZ cluster in multiple AWS Regions as the data store would not provide a fast failover or disaster recovery solution, as the company would need to manually restore data from backups or snapshots in another Region in case of a failure.
Creating an Amazon Aurora cluster in multiple AWS Regions as the data store and using a Network Load Balancer to balance the database traffic in different Regions would not work, as Network Load Balancers do not support cross-Region routing. Moreover, this strategy would not provide a consistent view of the data across Regions, as Aurora clusters do not replicate data automatically between Regions unless they are part of a global database.
Setting up the application in two AWS Regions and using Amazon Route 53 failover routing that points to Application Load Balancers in both Regions would not provide a low RTO, as Route 53 failover routing relies on DNS resolution, which can take time to propagate changes across different DNS servers and clients. Moreover, this strategy would not provide deterministic routing, as Route 53 failover routing depends on DNS caching behavior, which can vary depending on different factors.

질문 # 432
A company recently created a new AWS Control Tower landing zone in a new organization in AWS Organizations. The landing zone must be able to demonstrate compliance with the Center tor Internet Security (CIS) Benchmarks tor AWS Foundations.
The company's security team wants to use AWS Security Hub to view compliance across all accounts Only the security team can be allowed to view aggregated Security Hub Findings. In addition specific users must be able to view findings from their own accounts within the organization All accounts must be enrolled m Security Hub after the accounts are created.
Which combination of steps will meet these requirements in the MOST automated way? (Select THREE.)

A. In the organization's management account create an Amazon EventBridge rule that reacts to the CreateManagedAccount event Create an AWS Lambda function that uses the Security Hub CreateMembers API operation to add new accounts to Security Hub. Configure the EventBridge rule to invoke the Lambda function.
B. In Security Hub, turn on automatic enablement.
C. Create an AWS IAM identity Center (AWS Single Sign-On) permission set that includes the required permissions Use the CreateAccountAssignment API operation to associate the security team users with the permission set and with the delegated security account.
D. Create an SCP that explicitly denies any user who is not on the security team from accessing Security Hub.
E. Turn on trusted access for Security Hub in the organization's management account. Create a new security account by using AWS Control Tower Configure the new security account as the delegated administrator account for Security Hub. In the new security account provide. Security Hub with the CIS Benchmarks for AWS Foundations standards.
F. Turn on trusted access for Security Hub in the organ ration's management account. From the management account, provide Security Hub with the CIS Benchmarks for AWS Foundations standards.

정답：B,C,E

설명：
Explanation
https://docs.aws.amazon.com/securityhub/latest/userguide/accounts-orgs-auto-enable.html

질문 # 433
An ecommerce company hosts a web application on Amazon EC2 instances that are in an Auto Scaling group.
The company deploys the application across multiple Availability Zones.
Application users are reporting intermittent performance issues with the application.
The company enables basic Amazon CloudWatch monitoring for the EC2 instances. The company identifies and implements a fix for the performance issues. After resolving the issues, the company wants to implement a monitoring solution that will quickly alert the company about future performance issues.
Which solution will meet this requirement?

A. Use AWS X-Ray to implement distributed tracing. Integrate X-Ray with Amazon CloudWatch RUM.
Use Amazon EventBridge to trigger automatic scaling actions based on custom events.
B. Enable detailed monitoring for the EC2 instances. Create custom CloudWatch metrics for application- specific performance indicators. Set up CloudWatch alarms based on the custom metrics. Use CloudWatch Logs Insights to analyze application logs for error patterns.
C. Use Amazon CloudFront to deliver the application. Use AWS CloudTrail to monitor API calls. Use AWS Trusted Advisor to generate recommendations to optimize performance. Use Amazon GuardDuty to detect potential performance issues.
D. Enable VPC Flow Logs. Use Amazon Data Firehose to stream flow logs to Amazon S3. Use Amazon Athena to analyze the logs and to send alerts to the company.

정답：B

질문 # 434
A company is migrating its container-based workloads to an AWS Organizations multi-account environment. The environment consists of application workload accounts that the company uses to deploy and run the containerized workloads. The company has also provisioned a shared services account tor shared workloads in the organization.
The company must follow strict compliance regulations. All container images must receive security scanning before they are deployed to any environment. Images can be consumed by downstream deployment mechanisms after the images pass a scan with no critical vulnerabilities. Pre-scan and post-scan images must be isolated from one another so that a deployment can never use pre-scan images.
A DevOps engineer needs to create a strategy to centralize this process.
Which combination of steps will meet these requirements with the LEAST administrative overhead? (Select TWO.)

A. Create an AWS Lambda function. Create an Amazon EventBridge rule that reacts to image scanning completed events and invokes the Lambda function. Write function code that determines the image scanning status and pushes images without critical vulnerabilities to the post-scan repositories.
B. Create a pipeline in AWS CodePipeline for each pre-scan repository. Create a source stage that runs when new images are pushed to the pre-scan repositories. Create a stage that uses AWS CodeBuild as the action provider. Write a buildspec.yaml definition that determines the image scanning status and pushes images without critical vulnerabilities lo the post-scan repositories.
C. Create Amazon Elastic Container Registry (Amazon ECR) repositories in the shared services account: one repository for each pre-scan image and one repository for each post-scan image. Configure Amazon ECR image scanning to run on new image pushes to the pre-scan repositories. Use resource-based policies to grant the organization write access to the pre-scan repositories and read access to the post-scan repositories.
D. Create pre-scan Amazon Elastic Container Registry (Amazon ECR) repositories in each account that publishes container images. Create repositories for post-scan images in the shared services account. Configure Amazon ECR image scanning to run on new image pushes to the pre-scan repositories. Use resource-based policies to grant the organization read access to the post-scan repositories.
E. Configure image replication for each image from the image's pre-scan repository to the image's post-scan repository.

정답：C,E

설명：
* Step 1: Centralizing Image Scanning in a Shared Services Account
The first requirement is to centralize the image scanning process, ensuring pre-scan and post-scan images are stored separately. This can be achieved by creating separate pre-scan and post-scan repositories in the shared services account, with the appropriate resource-based policies to control access.
Action: Create separate ECR repositories for pre-scan and post-scan images in the shared services account. Configure resource-based policies to allow write access to pre-scan repositories and read access to post-scan repositories.
Why: This ensures that images are isolated before and after the scan, following the compliance requirements.
Reference:
This corresponds to Option A: Create Amazon Elastic Container Registry (Amazon ECR) repositories in the shared services account: one repository for each pre-scan image and one repository for each post-scan image. Configure Amazon ECR image scanning to run on new image pushes to the pre-scan repositories. Use resource-based policies to grant the organization write access to the pre-scan repositories and read access to the post-scan repositories.
* Step 2: Replication between Pre-Scan and Post-Scan Repositories
To automate the transfer of images from the pre-scan repositories to the post-scan repositories (after they pass the security scan), you can configure image replication between the two repositories.
Action: Set up image replication between the pre-scan and post-scan repositories to move images that have passed the security scan.
Why: Replication ensures that only scanned and compliant images are available for deployment, streamlining the process with minimal administrative overhead.
This corresponds to Option C: Configure image replication for each image from the image's pre-scan repository to the image's post-scan repository.

질문 # 435
......

만일Amazon DOP-C02인증시험을 첫 번째 시도에서 실패를 한다면 Amazon DOP-C02덤프비용 전액을 환불 할 것입니다. 만일 고객이 우리 제품을 구입하고 첫 번째 시도에서 성공을 하지 못 한다면 모든 정보를 확인 한 후에 구매 금액 전체를 환불 할 것 입니다. 이러한 방법으로 저희는 고객에게 어떠한 손해도 주지 않을 것을 보장합니다.

DOP-C02최신버전자료: https://www.itexamdump.com/DOP-C02.html

참고: Itexamdump에서 Google Drive로 공유하는 무료, 최신 DOP-C02 시험 문제집이 있습니다: https://drive.google.com/open?id=1VNQBjD8pVf_KWddN0WtMWVMGEh69OlVU