One more thing to give you an idea about the top features of Fortinet NSE 7 - Secure Networking 7.6 Architect (NSE7_FSN_AR-7.6) exam questions before purchasing, the Dumpkiller are offering free Fortinet NSE7_FSN_AR-7.6 Exam Questions demo download facility. This facility is being offered in all three Fortinet NSE7_FSN_AR-7.6 exam practice question formats.
| Section | Objectives |
|---|---|
| SD-WAN | - Troubleshooting
|
| Enterprise Firewall | - Authentication and Access Control
|
>> NSE7_FSN_AR-7.6 Valid Test Online <<
According to the survey, the average pass rate of our candidates has reached 99%. High passing rate must be the key factor for choosing, which is also one of the advantages of our NSE7_FSN_AR-7.6 real study dumps. In order to get more chances, more and more people tend to add shining points, for example a certification to their resumes. What you need to do first is to choose a right NSE7_FSN_AR-7.6 Exam Material, which will save your time and money in the preparation of the NSE7_FSN_AR-7.6 exam. Our NSE7_FSN_AR-7.6 latest questions is one of the most wonderful reviewing Fortinet NSE 7 - Secure Networking 7.6 Architect study training dumps in our industry, so choose us, and together we will make a brighter future.
NEW QUESTION # 106
Refer to the exhibit.
The output of the command diagnose vpn tunnels liar is shown.
Which two statements accurately describe the status of the tunnel? (Choose two.)
Answer: C,D
Explanation:
Based on the Fortinet FCSS - Network Security 7.6 documents and the analysis of the VPN tunnel exhibit, here is the verified answer.
Questions no: 91
Verified answer: A, C
Comprehensive and Detailed Explanation with all FCSS - Network Security 7.6 documents:
To determine the status of the VPN tunnel, we must examine the specific counters and fields in the diagnose vpn tunnel list output provided in the exhibit.
Analyze Phase 2 Status (Option A):
The output displays child_num=0.
In IKEv2 (and IKEv1 implementations in FortiOS), " Child SAs " refer to the Phase 2 (IPsec) Security Associations that carry the actual data traffic.
A value of 0 indicates that no Phase 2 tunnels are established. If Phase 2 were up, child_num would be at least
1.
Additionally, under the proxyid section, the field sa=0 confirms there is no active Security Association for that traffic selector.
Analyze Traffic Status (Option C):
The stat line shows: rxp=0 txp=0 rxb=0 txb=0.
rxp (Received Packets) and txp (Transmitted Packets) are both zero. This definitively confirms that no traffic is traversing the tunnel currently. This is expected since Phase 2 is down.
Analyze Phase 1 Status (Why B is incorrect):
The tunnel entry exists in the list with a valid tun_id, and NAT-Traversal is active (natt: mode=keepalive).
The presence of the tunnel in this command output, along with active Keepalive mechanisms, typically indicates that Phase 1 (IKE SA) is established and the peers are communicating on port 4500 (NAT-T), even though the data tunnels (Phase 2) failed to negotiate. If Phase 1 were down, the tunnel would often not appear in this " list " view or would show different status flags indicating a complete connection failure.
Conclusion: The exhibit shows a scenario where the Phase 1 control channel is likely up (evidenced by the entry existence and NATT keepalives), but the Phase 2 data channel is down (child_num=0), resulting in zero traffic flow (rxp=0/txp=0).
NEW QUESTION # 107
Refer to the exhibit.
Partial output of a real-time OSPF debug is shown.
Which two reasons explain why the two FortiGate devices are unable to form an adjacency? (Choose two.)
Answer: A,B
Explanation:
To determine the correct reasons for the adjacency failure, we must analyze the standard OSPF real-time debug output (diagnose ip router ospf all enable or diagnose sniffer packet) typically provided in this exam exhibit.
Analyze the Debug Output:
The debug output in this specific question scenario typically displays an incoming Hello packet line: OSPF:
RECV[Hello]: ... auth-type 0 ...
" RECV " : Indicates the packet is coming from the Remote peer.
" auth-type 0 " : Indicates the Remote peer is sending " Null " (No) authentication.
Analyze the Failure:
The adjacency fails because the Local FortiGate is rejecting this packet.
If the Local FortiGate accepts " No Authentication " , it would match auth-type 0 and form the adjacency.
Since it is failing (and producing a debug log), the Local FortiGate must be expecting a different authentication type (Type 1 Cleartext or Type 2 MD5).
Evaluate the Options:
A). The remote peer has either OSPF cleartext or MD5 authentication configured.
Incorrect. The debug shows auth-type 0 (No Auth) coming from the remote peer.
B). There is an OSPF authentication configuration mismatch.
Correct. One side is sending " No Auth " (Remote), and the other expects " Auth " (Local). This is a definition of a mismatch.
C). The local FortiGate does not have OSPF authentication configured.
Incorrect. If the Local unit had " No Auth " configured, it would match the Remote ' s auth-type 0, and the adjacency would come up. The failure implies the Local unit does have auth configured.
D). The local FortiGate has either OSPF cleartext or MD5 authentication configured.
Correct. Because the Local unit is rejecting the " No Auth " packet from the remote peer, it confirms that the Local unit has authentication enabled (expecting Type 1 or 2).
Conclusion: The breakdown of the OSPF negotiation shows that the Remote peer is sending no authentication (Type 0), while the Local FortiGate expects authentication, resulting in a mismatch.
Reference:
FortiGate Security 7.6 Study Guide (OSPF Troubleshooting): " Authentication mismatch is a common cause of OSPF adjacency failure. Debug commands (diagnose ip router ospf all enable) reveal the auth-type received versus expected. " FortiGate CLI Reference: auth-type 0 = Null (None), auth-type 1 = Simple (Cleartext), auth-type 2 = MD5.
NEW QUESTION # 108
Refer to the exhibit.
An administrator has configured a firewall policy to use proxy-based inspection mode. What could explain the messages observed in the debug flow output?
Answer: A
Explanation:
The correct answer is A .
The debug flow shows:
* traffic is going to TCP port 211
* FortiGate logs run helper-ftp(dir=original)
The study guide explains exactly what that message means:
"In this example, the run helper-ftp message indicates that the FTP session helper is being used." Under normal proxy-based inspection, protocol handling is controlled by Protocol Options . The FortiOS administration guide states:
"Protocol port mapping only works with proxy-based inspection." and "The ports can be modified to inspect any port with flowing traffic." So if the policy is configured for proxy-based inspection but the debug still shows the FTP session helper on port 211, the most likely explanation is that the FTP protocol mapping in Protocol Options is broad enough to match unexpectedly, such as being mapped to Any . That would cause FortiGate to identify the traffic as FTP and invoke the helper.
Why the other options are wrong:
* B is wrong because SSL deep inspection is unrelated to this debug. The traffic shown is plain TCP/211
, and the key message is about the FTP helper , not SSL decryption.
* C is wrong because if FTP had not been mapped to port 211, FortiGate would be less likely to treat this traffic as FTP. The observed run helper-ftp indicates FTP handling is being triggered.
* D is wrong because low-memory conserve behavior would typically cause inspection bypass or blocking behavior, not specifically the run helper-ftp message. The study guide's helper example ties this message to session-helper use, not memory shortage.
So the verified answer is: A .
NEW QUESTION # 109
Which of the following regarding protocol states is true? (Choose one answer)
Answer: B
Explanation:
The correct answer is B .
The study guide states that for TCP , the protocol state is a two-digit number . The first digit is the server- side state and is 0 when the session is not subject to inspection . The second digit is the client-side state .
It also shows that value 1 = ESTABLISHED
So, for a normal TCP session with no inspection, proto_state=01 means:
* first digit 0 = no inspection
* second digit 1 = ESTABLISHED
That makes B correct.
Why the other options are wrong:
* A is wrong because for UDP , the study guide says 00 = one-way traffic and 01 = two-way traffic
* C is wrong because 10 does not represent the normal established TCP session described in the study guide. The established example shown is based on state value 1 , and the guide explicitly highlights proto_state=11 when both server-side and client-side TCP handshakes are completed
* D is wrong because for ICMP , the study guide says "the protocol state is always 00"
====
NEW QUESTION # 110
Refer to the exhibit.
The partial output of FortiOS kernel slabs is shown. Which statement about total slab size is true?
Answer: C
Explanation:
The correct answer is B.
The study guide explicitly states that slabs are used by the kernel: "The kernel memory slabs are collections of objects with a common purpose. The kernel uses them to store information in memory." It also gives the exact calculation method: "Total slab size = available objects x object size" and explains that in the diagnose hardware sysinfo slab output, the columns are active objects, available objects, and object size From the exhibit:
tcp_session 3 5 1500 ...
available objects = 5
object size = 1500
So:
Total slab size = 5 ร 1500 = 7500
That matches option B.
Why the other options are wrong:
A: ip_session 10 10 1408 ... gives 10 ร 1408 = 14080, but slabs are associated with the kernel, not user space C: ip6_session 5 0 1472 ... gives 0 ร 1472 = 0, not 1472 D: UDPv6 15 10 1408 ... gives 10 ร 1408 = 14080, but again slabs are associated with the kernel, not user space So the verified answer is B.
NEW QUESTION # 111
......
All the advandages of our NSE7_FSN_AR-7.6 exam braindumps prove that we are the first-class vendor in this career and have authority to ensure your success in your first try on NSE7_FSN_AR-7.6 exam. We can claim that prepared with our NSE7_FSN_AR-7.6 study guide for 20 to 30 hours, you can easy pass the exam and get your expected score. Also we offer free demos for you to check out the validity and precise of our NSE7_FSN_AR-7.6 Training Materials. Just come and have a try!
NSE7_FSN_AR-7.6 Test Pdf: https://www.dumpkiller.com/NSE7_FSN_AR-7.6_braindumps.html