P.S. Free & New NSE5_FNC_AD_7.6 dumps are available on Google Drive shared by FreeDumps: https://drive.google.com/open?id=1XJxLwcwJH2UIi9f8Gf8EaseKMCN9Kn1t
In order to meet all demands of all customers, our company has employed a lot of excellent experts and professors in the field to design and compile the NSE5_FNC_AD_7.6 test dump with a high quality. It has been a generally accepted fact that the NSE5_FNC_AD_7.6 exam reference guide from our company are more useful and helpful for all people who want to pass exam and gain the related exam. We believe this resulted from our constant practice, hard work and our strong team spirit. With the high class operation system, the NSE5_FNC_AD_7.6 study question from our company has won the common recognition from a lot of international customers for us. If you decide to buy our NSE5_FNC_AD_7.6 test dump, we can assure you that you will pass exam in the near future.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
>> New NSE5_FNC_AD_7.6 Braindumps Sheet <<
Our NSE5_FNC_AD_7.6 exam questions are supposed to help you pass the exam smoothly. Don't worry about channels to the best NSE5_FNC_AD_7.6 study materials so many exam candidates admire our generosity of offering help for them. Up to now, no one has ever challenged our leading position of this area. The existence of our NSE5_FNC_AD_7.6 learning guide is regarded as in favor of your efficiency of passing the exam.
NEW QUESTION # 47
Which two statements are true about integrating a third-party device using SNMP traps from that device as input to generate an event? (Choose two.)
Answer: A,D
NEW QUESTION # 48
Refer to the exhibit.
An administrator has configured the DHCP scope for a registration isolation network, but the isolation process isn't working.
What is the problem with the configuration?
Answer: C
Explanation:
In a FortiNAC-F deployment, the configuration of the DHCP scope for isolation networks (Registration, Remediation, etc.) must perfectly align with the underlying network infrastructure to ensure that isolated hosts can communicate with the FortiNAC appliance. In the provided exhibits, there is a clear discrepancy between the DHCP configuration and the Network Topology.
As shown in the "Network Topology" exhibit, the Registration Network resides on a router interface (or sub-interface) with the IP address 192.168.180.1. This address represents the default gateway for any host placed into the Registration VLAN. However, the "DHCP configuration" exhibit shows the scope "REG-ScopeOne" configured with a Gateway of 10.0.1.254. This 10.0.1.254 address belongs to the management/service network (port2 of FortiNAC), not the registration subnet. If a host in the Registration VLAN receives this incorrect gateway via DHCP, it will attempt to send all off-link traffic to an unreachable IP, preventing it from loading the Captive Portal or communicating with the FortiNAC server.
According to the FortiNAC-F Configuration Wizard Reference, when defining a Layer 3 network scope, the "Gateway" field must contain the IP address of the router interface that acts as the gateway for that specific isolation VLAN. The FortiNAC appliance itself usually sits on a different subnet, and traffic is directed to it via the router's DHCP Relay (IP Helper) and DNS redirection.
"When configuring scopes for a Layer 3 network, the Gateway value must be the IP address of the router interface for that subnet. This allows the host to reach its local gateway to route traffic. If the gateway is misconfigured, the host will be unable to reach the FortiNAC eth1/port2 interface for registration... Ensure the Gateway matches the network topology for the isolation VLAN." - FortiNAC-F Configuration Wizard Reference Manual: DHCP Scopes.
NEW QUESTION # 49
When creating a device profiling rule, what is an advantage of modeling the endpoint as a device in the inventory view?
Answer: A
Explanation:
The correct answer is B . When a device profiling rule classifies an endpoint, the Register as setting can place the device in the host view, the topology/inventory view, or both. The study guide explains that if the profiled endpoint is registered into the topology view, the administrator must select a topology container.
The advantage of modeling the endpoint as a device in the inventory view is that it can be treated as a pingable device , where FortiNAC-F can use Contact Status settings. The guide explains that a modeled pingable device has contact status controls that allow polling to be enabled or disabled, the polling interval to be set, and the last successful and last attempted poll to be displayed.
Option A and option C are not the best answers because connection logs are associated with host connection tracking, not the key advantage of placing a profiled endpoint into inventory as a modeled device. Option D is wrong because user association applies more naturally to hosts or BYOD ownership workflows; it is not the main benefit of inventory modeling. The tested benefit is scheduled reachability monitoring through contact status polling.
NEW QUESTION # 50
Refer to the exhibit.
An administrator is configuring FortiNAC-F (or the onboarding of guest users. Which IP address would be used for the gateway defined in the DHCP scope?
Answer: C
Explanation:
The correct answer is D . The question is about guest onboarding , and the exhibit shows the Guest Network using gateway 10.20.1.250 . In a Layer 3 captive network design, FortiNAC-F provides DHCP and DNS services to isolated or captive-network hosts, but the DHCP scope must still give the endpoint the correct default gateway for the network where that endpoint is placed. The study guide specifically warns that, when configuring Layer 3 captive network scopes, the administrator must think from the isolated host's perspective for the IP pool and gateway configuration . It also states that each captive network interface configuration includes an IP address, subnet mask, default gateway, and one or more DHCP scopes.
Option A , 10.0.1.254 , is the infrastructure gateway on the FortiNAC-F service/production-side segment, not the guest network gateway. Option B , 10.0.1.110 , is the FortiNAC-F interface address shown in the diagram, not the default gateway for guest clients. Option C , 10.10.1.250 , is the gateway for the Isolation Network , not the Guest Network . Since the administrator is configuring guest onboarding, the DHCP scope for guest users must hand out 10.20.1.250 as the gateway.
NEW QUESTION # 51
While discovering network infrastructure devices, a switch appears in the inventory topology with a question mark (?) on the icon. What would cause this?
Answer: C
Explanation:
In FortiNAC-F, the Inventory topology uses specific icons to represent the status and model of discovered network infrastructure. When a switch or other network device is discovered via SNMP, FortiNAC-F retrieves its System ObjectID (sysObjectID) to identify the specific make and model. This OID is then compared against the internal database of supported device mappings.
A question mark (?) icon appearing on a discovered switch indicates that while the discovery process successfully communicated with the device (meaning SNMP credentials were correct), the SNMP ObjectID is not recognized or mapped in the current version of FortiNAC-F. This essentially means the device is "unsupported" by the current software out-of-the-box. Because the OID is unknown, FortiNAC-F does not know which CLI or SNMP command set to use for critical functions like L2 polling (host visibility) or VLAN switching (enforcement). To resolve this, an administrator can manually "Set Device Mapping" to a similar existing model or a "Generic SNMP Device" if only basic L3 visibility is required.
"Discovered devices displaying a '?' icon indicate the currently running version does not have a mapping for that device's System OID (device is not supported). Device mappings are used to manage the device by performing functions such as L2/L3 Polling, Reading, and Switching VLANs." - Fortinet Technical Tip: Options for devices unable to be modeled in Inventory.
NEW QUESTION # 52
......
If you're still learning from the traditional old ways and silently waiting for the test to come, you should be awake and ready to take the exam in a different way. Study our NSE5_FNC_AD_7.6 study materials to write "test data" is the most suitable for your choice, after recent years show that the effect of our NSE5_FNC_AD_7.6 Study Materials has become a secret weapon of the examinee through qualification examination, a lot of the users of our NSE5_FNC_AD_7.6 study materials can get unexpected results in the examination.
New NSE5_FNC_AD_7.6 Study Plan: https://www.freedumps.top/NSE5_FNC_AD_7.6-real-exam.html
BTW, DOWNLOAD part of FreeDumps NSE5_FNC_AD_7.6 dumps from Cloud Storage: https://drive.google.com/open?id=1XJxLwcwJH2UIi9f8Gf8EaseKMCN9Kn1t