If you are preparing for 300-110 exam and upset without accurate exam torrent and practice materials, ValidExam guarantees you to pass exam at first attempt absolutely. Our 300-110 exam torrent is edited by latest official examination knowledge. Once official department change questions we will release new version of 300-110 Exam Torrent accordingly. We provide one year free update and service warranty for all products. You will have sufficient time to take part in exams.
| Section | Weight | Objectives |
|---|---|---|
| Wired and Wireless Infrastructure | 30% | - Physical infrastructure requirements - Design high-density wireless networks - Design radio management - Logical infrastructure requirements - Design for data, voice, video, location - Design wireless bridging (mesh) |
| Mobility | 25% | - Site Tags - Optimize client roaming - Design mobility groups - Validate mobility tunneling |
| Wireless Site Survey | 25% | - Pre-deployment site survey - Material attenuation and its design effects - Predictive site survey - Post-deployment site survey - Layer 1 site survey analysis - Collect design requirements and evaluate constraints - Planning tools and network metrics evaluation |
| WLAN High Availability | 20% | - Design AP high availability - Design controller high availability |
>> Latest 300-110 Exam Discount <<
The Designing Cisco Wireless Networks web-based practice exam has all the features of the desktop software, but it requires an active internet connection. If you are busy in your daily routine and cant manage a proper time to sit and prepare for the 300-110 certification test, our Designing Cisco Wireless Networks 300-110 PDF Questions file is ideal for you. You can open and use the 300-110 Questions from any location at any time on your smartphones, tablets, and laptops. Questions in the Designing Cisco Wireless Networks 300-110 PDF document are updated, and real.
NEW QUESTION # 38
An engineer in a branch office that does not have a wired backhaul must ensure that local clients can be switched locally and authenticated centrally. In which mode must the AP be configured?
Answer: D
Explanation:
Flex+Bridge mode is a specialized AP operating mode that combines two distinct Cisco wireless capabilities:
FlexConnect (for local switching of client data traffic and central authentication via the WLC) and Bridge
/Mesh mode (enabling wireless backhaul when no wired Ethernet uplink is available). In a branch environment without wired backhaul, a standard FlexConnect AP (Option D) cannot operate because FlexConnect still requires an Ethernet connection for its control plane. Bridge mode alone provides mesh backhaul but does not support the local switching with central authentication model required here. MAP (Option A) is a Mesh Access Point role for wireless backhaul, and RAP (Option C) is a Root Access Point with a wired connection - neither meets the no-wired-backhaul requirement with local switching.
Flex+Bridge uniquely satisfies both requirements: the Flex component allows locally switched VLANs to be bridged directly to the access layer without traversing the WAN, while the Bridge component enables the AP to use a wireless mesh link for its backhaul uplink. Central authentication is maintained via the CAPWAP control tunnel over the mesh link. Reference: WLSD Study Guide - FlexConnect Design, Mesh Networking, Flex+Bridge Mode Configuration and Use Cases.
NEW QUESTION # 39
A consultant must design a WLAN for a large campus with high AP density, 50-100 clients per cell, 5 Mbps throughput per client minimum, 5 GHz and 2.4 GHz coverage at -67 dBm, and no
802.11b clients. Which two WLAN design approaches meet the requirements? (Choose two.)
Answer: C,E
Explanation:
Designing for 50-100 clients per cell with 5 Mbps minimum throughput and no 802.11b clients requires two critical optimizations. First, setting minimum mandatory data rates to 12-18 Mbps (Option A) removes legacy lower data rates from the AP's supported rate set. When 1, 2, 5.5, and
11 Mbps rates are disabled and 12 Mbps becomes the minimum mandatory rate, legacy 802.11b clients are excluded from the cell, airtime efficiency improves dramatically, and clients connecting at higher rates use less channel time per frame, increasing effective capacity. Second, Flexible Radio Assignment (FRA) for 2.4 GHz reduction (Option D) is critical in high-density environments.
FRA allows the WLC to dynamically reassign some 2.4 GHz radios to 5 GHz operation or monitor mode, reducing 2.4 GHz cell size and interference while increasing 5 GHz capacity in the high- density area.
NEW QUESTION # 40
A customer has two Cisco wireless controllers named WLC-A and WLC-B. Each controller is in a different building on a campus. The WLCs have different Layer 3 interfaces and broadcast the same SSIDs from their respective APs. Users must remain connected to the same VLAN and maintain their IP addresses during roaming from the APs attached to WLC-A and WLC-B. Which action accomplishes the requirement?
Answer: D
Explanation:
The requirement for users to retain their VLAN assignment and IP address when roaming between buildings managed by different WLCs is a Layer 3 roaming scenario. In Cisco ' s wireless architecture, IP address preservation across controller boundaries is achieved through inter-controller mobility - specifically the foreign-anchor mobility tunnel mechanism. When a client roams from Building A (WLC-A) to Building B (WLC-B), WLC-B becomes the foreign controller and WLC-A becomes the anchor controller. WLC-B tunnels the client ' s traffic back to WLC-A, allowing the client to retain its original IP address even while physically associated to an AP managed by WLC-B. This requires creating a mobility group between WLC-A and WLC-B with both controllers configured with the same mobility group name - the group name is the trust identifier that permits the mobility tunnel and anchor-foreign relationship to form. An SSO cluster (Option B) creates redundancy between two WLCs operating as one logical entity, not inter-building roaming between independent controllers. 802.11r (Option C) accelerates re-association but does not preserve IP addresses across different Layer 3 subnets. AP groups (Option D) control SSID and VLAN assignments but do not enable inter-controller IP preservation. Reference: WLSD Study Guide - Inter-Controller Mobility, Layer 3 Roaming, IP Address Preservation.
NEW QUESTION # 41
An engineer is performing capacity planning for an open-plan office with 900 concurrent devices, each requiring 2 Mbps of application throughput. Assuming approximately 120 Mbps of usable aggregate throughput per 5 GHz radio, how should the AP count be determined?
Answer: C
Explanation:
Capacity-driven design starts with aggregate demand rather than area. Here 900 devices at 2 Mbps each represent 1800 Mbps of required throughput; dividing by roughly 120 Mbps of usable per-radio throughput yields a minimum of about 15 client-serving radios, before applying any headroom for growth or peak concurrency. That number is then cross-checked against the coverage model, because the resulting AP density must still deliver the required RSSI and SNR everywhere without creating excessive co-channel interference - if capacity demands more APs than coverage requires, transmit power and channel width are reduced to keep the cells small enough to coexist. Designing purely from coverage radius (Option A) is the classic failure mode in dense environments, producing enough signal but nowhere near enough airtime. Fixed device- per-AP ratios ignore the actual application profile, and available switch ports are a constraint to satisfy, not a method for sizing the RF design.
NEW QUESTION # 42
A wireless engineer is designing a wireless network for a warehouse using access points with internal antennas. Which two elements have a negative effect on the wireless users? (Choose two.)
Answer: A,E
Explanation:
In a warehouse setting, two elements with a significant negative effect on wireless performance are AP height and absorption. AP height (Option B) is critical because warehouses often have very high ceilings (25-45 feet). When APs with internal (omnidirectional) antennas are mounted too high, the signal propagates primarily in the horizontal plane and the path loss to floor-level worker devices becomes excessive.
Additionally, metal shelving between the AP and users further attenuates the already weak signal at high mounting heights. Absorption (Option E) is a major challenge in warehouses because the inventory stored on metal racks, particularly liquid goods, dry goods in cardboard, and dense materials, absorbs RF energy significantly. Metal racking causes both absorption and reflection, creating RF shadows and multipath environments that degrade connection quality. Wireless channels (Option A) are a design parameter, not an environmental impediment. Client authentication (Option C) and authorization (Option D) are network security processes unrelated to RF propagation quality. Reference: WLSD Study Guide - Warehouse Wireless Design, AP Height Considerations, RF Absorption in Industrial Environments.
NEW QUESTION # 43
......
This kind of polished approach is beneficial for a commendable grade in the Designing Cisco Wireless Networks (300-110) exam. While attempting the exam, take heed of the clock ticking, so that you manage the Cisco 300-110 questions in a time-efficient way. Even if you are completely sure of the correct answer to a question, first eliminate the incorrect ones, so that you may prevent blunders due to human error.
Latest 300-110 Braindumps Files: https://www.validexam.com/300-110-latest-dumps.html