P.S. Free & New EDGE-Expert dumps are available on Google Drive shared by Fast2test: https://drive.google.com/open?id=12OCYNtIPGuFeMVffS31kTQi9QDdm7g-g
The price for Excellence in Design for Greater Efficiencies (EDGE Expert) Exam EDGE-Expert study materials is quite reasonable, and no matter you are a student or you are an employee, you can afford the expense. Besides, EDGE EDGE-Expert exam materials are compiled by skilled professionals, therefore quality can be guaranteed. EDGE-Expert Study Materials cover most knowledge points for the exam, and you can learn lots of professional knowledge in the process of trainning.
| Section | Weight | Objectives |
|---|---|---|
| Water Efficiency & Materials | 25% | - Water Demand
|
| Energy Efficiency | 25% | - HVAC Systems
|
| Financial & Results Analysis | 10% | - Results and outputs of EDGE
|
| EDGE System Overview | 15% | - Understanding the EDGE Standard
|
| Software & Methodology | 25% | - Climate Zones & Weather Data
|
>> EDGE-Expert Online Version <<
Don't waste much more time on preparing for a test. Hurry to purchase Fast2test EDGE EDGE-Expert certification training dumps. With the exam dumps, you will know how to effectively prepare for your exam. This is precious tool that can let you sail through EDGE-Expert test with no mistakes. Missing the chance, I am sure you must regret it. Thus, don't hesitate and act quickly.
NEW QUESTION # 99
Which of the following must be included in the EDGE Auditor submission for Preliminary Certification?
Answer: A
Explanation:
The EDGE Auditor's submission for Preliminary Certification (design stage) must include specific elements to support the recommendation for certification. The EDGE Certification Protocol specifies: "For Preliminary Certification, the EDGE Auditor's submission must include compliance documents for the selected measures, such as drawings, specifications, and manufacturer's data sheets, which verify that the design aligns with the self-assessment in the EDGE software. These documents are reviewed by the Certification Provider to confirm eligibility" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option C, compliance documents for selected measures, directly matches this requirement. Option A (all available design data) is too broad and not required: "Only documents directly related to the selected measures are needed, not all design data" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option B (Chapter 5 EDGE certification protocol) is incorrect, as this refers to the protocol document itself, not a submission component:
"The certification protocol is a reference, not part of the Auditor's submission" (EDGE Certification Protocol, Section 1.1: Overview). Option D (design audit site visit results) is incorrect, as site visits are not required at the design stage: "Preliminary Certification is based on a desk audit, not a site visit, which occurs at the post- construction stage" (EDGE Certification Protocol, Section 3.3: Certification Decision). Thus, compliance documents (Option C) are required in the submission.
Reference:EDGE Certification Protocol, Section 3.2: Audit Requirements, Section 3.3: Certification Decision, Section 1.1: Overview.
NEW QUESTION # 100
In the EDGE software, the Base Case selection of external wall materials in hotels relies on information derived from:
Answer: D
Explanation:
The EDGE software uses a Base Case to establish a benchmark for resource consumption, tailored to local conditions. The EDGE Methodology Report explains how the Base Case is constructed: "The Base Case for external wall materials in hotels is determined using data from market surveys of typical building practices in the project's country, supplemented by national building performance codes where available. This ensures the baseline reflects local construction norms and regulatory standards" (EDGE Methodology Report Version 2.0, Section 3.1: Base Case Determination). Option A matches this description by referencing typical building practices and national codes. Option B incorrectly refers to global practices and international codes, which EDGE does not use, as the software prioritizes local context. Option C, focusing on corporate specifications, is not part of the Base Case methodology, as the Base Case is standardized, not project-specific. Option D, involving local suppliers or accreditation, is irrelevant to how EDGE determines the Base Case, which relies on broader market data rather than supplier-specificinformation.
Reference:EDGE Methodology Report Version 2.0, Section 3.1: Base Case Determination; EDGE User Guide Version 2.1, Section 2.3: Using the EDGE App.
NEW QUESTION # 101
Which of the following measures will impact energy, water, and materials in an air-conditioned hospital with a water-cooled chiller?
Answer: A
Explanation:
In EDGE, measures are evaluated for their impact on energy, water, and embodied energy in materials, the three core pillars of the standard. For an air-conditioned hospital with a water-cooled chiller, the measure must affect all three areas to be the correct answer. The EDGE User Guide provides detailed descriptions of each measure's impact: "Variable speed drive (VSD) pumps in HVAC systems, such as those used in water- cooled chillers, impact energy by reducing electricity consumption through load modulation, water by optimizing the chiller's cooling water circulation (reducing water use in the cooling tower), and materials because their installation may involve additional components with embodied energy, such as the VSD unit itself" (EDGE User Guide, Section 4.2: Energy Efficiency Measures). Option C, variable speed drive pumps, thus impacts all three areas: energy (reduced electricity use), water (less cooling tower water loss), and materials (embodied energy in the VSD equipment). Option A (insulation of the roof) affects energy (reduced cooling load) and materials (embodied energy in insulation), but not water: "Roof insulation reduces energy demand but does not directly impact water consumption" (EDGE User Guide, Section 4.1: Insulation Measures). Option B (water-efficient urinals) impacts water (reduced consumption) and potentially materials (embodied energy in fixtures), but not energy: "Water-efficient urinals save water but have no direct energy impact in EDGE calculations" (EDGE User Guide, Section 5.2: Water Efficiency Measures). Option D (water- efficient dishwashers) also affects water and materials, but not energy in this context: "Water-efficient dishwashers reduce water use, but their energy impact is minimal unless they include hot water savings, which is not specified for hospital dishwashers in EDGE" (EDGE Methodology Report Version 2.0, Section
4.2: Water Savings Calculations). The EDGE Methodology Report further confirms: "VSD pumps in water- cooled chillers are unique in affecting all three EDGE metrics-energy through efficiency, water through reduced cooling tower evaporation, and materials through the embodied energy of the equipment" (EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics). Thus, variable speed drive pumps (Option C) is the measure impacting energy, water, and materials.
Reference:EDGE User Guide Version 2.1, Section 4.2: Energy Efficiency Measures, Section 4.1: Insulation Measures, Section 5.2: Water Efficiency Measures; EDGE Methodology Report Version 2.0, Section 5.1:
Energy Efficiency Metrics, Section 4.2: Water Savings Calculations.
NEW QUESTION # 102
A Client is developing two identical hotels in different cities but finds that the energy intensity (kWh/m²/year) of the hotels are different. Which of the following difference in these two cities could have caused this?
Answer: D
Explanation:
In the EDGE methodology, the baseline and improved-case energy calculations are highly dependent on local climate conditions because climate directly affects heating and cooling demands. Even if two hotels are identical in design, construction, and systems, their modeled energy intensity can differ if they are located in cities with different temperature profiles, humidity levels, solar radiation, and seasonal variations. In hotter or more humid climates, cooling loads and dehumidification energy increase; in colder climates, heating loads increase. EDGE uses location-specific weather data to determine these loads, which then influences the annual delivered energy consumption expressed in kWh per square meter per year.
Electricity prices do not affect energy intensity because kWh/m²/year is a consumption metric, not a cost metric. Cost of materials may influence project budgeting and material choices, but it does not directly change the operational energy calculation unless it results in different envelope performance, which the question states is identical. Availability of fresh water affects water strategy decisions and water consumption, not energy intensity. Therefore, the difference most directly responsible for differing energy intensities in EDGE for identical hotels in different cities is climate.
NEW QUESTION # 103
Which of the following is an accurate statement regarding record keeping for an EDGE Auditor?
Answer: D
Explanation:
According to the CBCI EDGE protocols and auditor requirements, EDGE Auditors are responsible for maintaining proper records of the projects they audit. This obligation is part of the professional and ethical framework that ensures transparency, accountability, and traceability in the certification process. Auditors must retain documentation related to the design audit, site audit, calculations, correspondence, and supporting evidence reviewed during certification.
The requirement is not satisfied by merely reviewing documents and returning them to the client or transferring them to another party. The auditor must independently keep records, typically in electronic format, to allow for quality assurance checks, potential appeals, disputes, or oversight reviews conducted by the Certification Body or IFC. This retention obligation extends for a defined period after certification.
Options A and D are incorrect because the auditor cannot transfer full responsibility for record retention to the client or EDGE Partner. Option B is incorrect because reviewing without retaining records violates audit protocol requirements. Therefore, the accurate statement is that the auditor should keep the electronic format of the information about the project submission.
NEW QUESTION # 104
......
You can enter a better company and improve your salary if you obtain the certification for the exam. EDGE-Expert exam materials will help you pass the exam and get corresponding certification successfully. EDGE-Expert exam materials contain most of knowledge points for the exam, and you can have a good command of the knowledge points if you choose us. In addition, we offer you free demo for EDGE-Expert Exam Braindumps, and you can have a try before buying. We provided you with free update for 365 days, and the update version will be sent to your email automatically.
New EDGE-Expert Dumps Files: https://www.fast2test.com/EDGE-Expert-premium-file.html
BONUS!!! Download part of Fast2test EDGE-Expert dumps for free: https://drive.google.com/open?id=12OCYNtIPGuFeMVffS31kTQi9QDdm7g-g