Users using our 300-110 study materials must be the first group of people who come into contact with new resources. When you receive an update reminder from 300-110 practice questions, you can update the version in time and you will never miss a key message. If you use our study materials, you must walk in front of the reference staff that does not use valid 300-110 Real Exam. And you will get the according 300-110 certification more smoothly.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: WLAN High Availability | 20% | - Design controller high availability - Design AP high availability |
| Topic 2: Wired and Wireless Infrastructure | 30% | - Design radio management - Physical infrastructure requirements - Design high-density wireless networks - Design wireless bridging (mesh) - Logical infrastructure requirements - Design for data, voice, video, location |
| Topic 3: Mobility | 25% | - Site Tags - Design mobility groups - Validate mobility tunneling - Optimize client roaming |
| Topic 4: Wireless Site Survey | 25% | - Post-deployment site survey - Pre-deployment site survey - Material attenuation and its design effects - Predictive site survey - Planning tools and network metrics evaluation - Collect design requirements and evaluate constraints - Layer 1 site survey analysis |
>> Training 300-110 For Exam <<
Most people are nervous and anxious to take part in the 300-110 exam for the first time. Then it is easy for them to make mistakes. So it is important to get familiar with the real test environment. Also, the real test environment of the 300-110 Study Materials can help you control time. After all, you must submit your practice in limited time in 300-110 practice materials. Trust in our 300-110 training guide, and you will get success for sure.
NEW QUESTION # 29
A customer designs a Cisco wireless environment to provide connectivity to employees and guests. The guest SSID must be configured on three anchor WLCs named Anchor1, Anchor2, and Anchor3 in a DMZ. The guest anchor priority must be configured to ensure that Anchor1 has the highest priority. Which priority level must be incorporated in the design for Anchor1?
Answer: C
Explanation:
In Cisco ' s guest anchor WLC deployment model, multiple anchor controllers can be configured in a DMZ to provide redundancy for guest WLAN traffic. The anchor priority value determines which anchor controller is preferred for establishing the guest mobility tunnel from the foreign WLC. Cisco ' s anchor priority system assigns the highest preference to the lowest numerical priority value. Priority 1 is the highest priority, meaning the foreign WLC will prefer Anchor1 when establishing the CAPWAP mobility tunnel for anchoring guest client traffic. Priority 2 would be assigned to Anchor2, and Priority 3 to Anchor3, creating a deterministic failover hierarchy. If Anchor1 becomes unreachable, the foreign controller automatically falls over to Anchor2, then to Anchor3. Priority 0 is not a valid anchor priority value in the Cisco WLC configuration. This design pattern is critical for enterprise guest deployments where DMZ anchor redundancy must be maintained without manual intervention. Reference: WLSD Study Guide - Guest Wireless Architecture, Anchor WLC Configuration, Mobility and DMZ Design.
NEW QUESTION # 30
An enterprise is using wireless as the main network connectivity for clients. To ensure wireless network availability, two standalone controllers are installed in the head office. APs are connected to the controllers using a round-robin approach to load balance the traffic. After a power cut, the wireless clients disconnect while roaming. An engineer tried eping from the controller but fails.
Which protocol needs to be allowed between the networks that the controllers are installed?
Answer: D
Explanation:
When eping (EoIP ping) fails between two Cisco Wireless LAN Controllers, it indicates that the data path of the mobility tunnel is blocked. In Cisco AireOS wireless networks, the mobility data path uses IP Protocol 97 (EtherIP -- Ethernet-over-IP encapsulation) for tunneling client traffic between the anchor and foreign controllers. This is distinct from the control path, which uses UDP port 16666. When the mobility data path (IP Protocol 97) is blocked by a firewall or ACL between the two controllers' networks, eping will fail because eping specifically tests the EoIP data encapsulation path. After a power cut, when clients disconnect and attempt to roam between APs on different controllers, the mobility tunnel must be operational for session continuity. If IP Protocol 97 is blocked, the mobility data plane cannot function, causing client disconnections during inter- controller roaming events. The other IP protocols listed (67, 77, 87) are not used for Cisco WLC mobility tunneling.
NEW QUESTION # 31
An engineer configured the optimized client roaming on Cisco WLC with an RSSI threshold of -72 dBm.
Clients report frequent disconnections. What must be configured for the AP to guide the client to a better AP?
Answer: A
Explanation:
The scenario presents a critical distinction in where Cisco WLC features are configured. Optimized roaming on Cisco WLC is a radio-level feature that monitors connected client RSSI and, when a client ' s signal falls below the configured threshold (-72 dBm), triggers a disassociation to force the client to reconnect to a stronger AP. However, without a mechanism to guide the client proactively before reaching the threshold, clients that disassociate simply reconnect to whatever AP their device selects, potentially causing the reported frequent disconnections. BSS Transition Management (802.11v) is configured at the SSID level and provides the complementary mechanism: before the client reaches the RSSI threshold, the AP sends a BSS Transition Management Request pointing the client toward a specific target AP with stronger signal. The correct architecture requires: optimized roaming configured at the radio level (triggering disconnection when RSSI falls too low) combined with BSS transition enabled at the SSID level (guiding the client to a better AP before forced disconnection). Options C and D incorrectly reverse the configuration levels for these features.
Disabling coverage hole detection (Option B) addresses a different problem and would not resolve the disconnection issue. Reference: WLSD Study Guide - Optimized Roaming Configuration, BSS Transition Management (802.11v), Client Roaming Architecture on Cisco WLC.
NEW QUESTION # 32
A customer wants to provide wireless coverage in a parking lot outside of a building. An engineer determines that three APs are required. The APs can be mounted on the light poles in the parking lot because there are cable routes already in place for these locations. The closest wiring closet is approximately 200 meters away. Which setup powers and connects the APs back to the customer network?
Answer: A
Explanation:
This question hinges on a fundamental network engineering constraint: the maximum transmission distance of copper Ethernet cabling. IEEE 802.3 standards specify a maximum segment length of 100 meters (328 feet) for all standard PoE and Ethernet over Category 5e, 6, or 6A UTP copper cabling. The parking lot light poles are approximately 200 meters from the closest wiring closet -- more than double the maximum copper distance. This immediately eliminates Options A and D, which specify Category 6 UTP cabling: at 200 meters, UTP copper cannot reliably carry Ethernet at any supported speed, and PoE cannot be delivered over this distance regardless of standard. The correct solution is fiber optic connectivity between the wiring closet and the parking lot, combined with a local AC/DC power module at each pole location.
Fiber optic cabling supports single-mode runs of kilometers and multi-mode runs of hundreds of meters at Gigabit speeds -- easily spanning 200 meters. At the AP mounting location on the light pole, an AC/DC power module (powered from the pole's existing electrical supply) converts AC power to the DC power the AP requires. Option B (fiber with 802.3af) is incorrect because PoE cannot be delivered over fiber -- 802.3af requires copper cabling for simultaneous power and data delivery.
NEW QUESTION # 33
An engineer is implementing a wireless design for a manufacturing company with a Catalyst 9800, a stack of two Catalyst 9300-48HX switches, and 9166 APs. Each AP must be named using the Zone-053424189-01X string where X is the area number. The engineer needs to connect the APs to the switch stack using PoE. How many APs must the engineer connect to the stack so that they run with full functionality?
Answer: A
Explanation:
The Cisco Catalyst 9300-48HX is a high-density PoE switch specifically designed for Cisco Catalyst 9100 Series AP deployments. The 48HX variant features 48 Multi-Gigabit PoE ports with IEEE 802.3bt (PoE++) support, providing up to 90W per port. The Cisco 9166 Access Point is a Wi-Fi 6E AP that requires IEEE
802.3bt (PoE++) power to achieve full radio functionality - enabling all three radios including the 6 GHz radio. In a two-switch stack of 48HX units, the total PoE budget is designed and rated to support full-port utilization with Cisco 9100 series APs simultaneously. The design intent is to connect APs to all ports on all switches - maximizing the deployment density and ensuring every AP runs with full functionality.
Connecting to only half the ports on one switch (Option B), half of each switch (Option C), or all ports on only one switch (Option D) would underutilize the infrastructure and fail to achieve the full deployment density that the switch stack was architected to deliver. The AP naming scheme requiring sequential area numbering requires all APs to be connected and fully operational across the entire stack. Reference: WLSD Study Guide - Catalyst 9300 PoE Infrastructure, 9166 AP Power Requirements, High-Density Wired Infrastructure Design.
NEW QUESTION # 34
......
As a professional website, DumpsMaterials offers you the latest and valid 300-110 test questions and latest learning materials, which are composed by our experienced IT elites and trainers. They have rich experience in the Cisco actual test and are good at making learning strategy for people who want to pass the 300-110 Practice Exam.
300-110 Exam Dumps Provider: https://www.dumpsmaterials.com/300-110-real-torrent.html