참고: Pass4Test에서 Google Drive로 공유하는 무료, 최신 F5CAB3 시험 문제집이 있습니다: https://drive.google.com/open?id=1ZZVpk4Ups4CoAvR5rwJ5_N9PcVvq5lNR
F5 F5CAB3시험이 정말 어렵다는 말을 많이 들으신 만큼 저희 Pass4Test는F5 F5CAB3덤프만 있으면F5 F5CAB3시험이 정말 쉬워진다고 전해드리고 싶습니다. F5 F5CAB3덤프로 시험패스하고 자격증 한방에 따보세요. 자격증 많이 취득하면 더욱 여유롭게 직장생활을 즐길수 있습니다.
| 주제 | 소개 |
|---|---|
| 주제 1 |
|
| 주제 2 |
|
만약Pass4Test를 선택하였다면 여러분은 반은 성공한 것입니다. 여러분은 아주 빠르게 안전하게 또 쉽게F5 F5CAB3인증시험 자격증을 취득하실 수 있습니다. 우리Pass4Test에서 제공되는 모든 덤프들은 모두 100%보장 도를 자랑하며 그리고 우리는 일년무료 업데이트를 제공합니다.
질문 # 58
A Standard Virtual Server for a web application is configured with Automap for the Source Address Translation option. The original source address of the client must be known by the backend servers. What should the BIG-IP Administrator configure to meet this requirement?
정답：A
설명：
SNAT Automap is a common configuration that replaces the client's original source IP address with one of the BIG-IP's self IP addresses. This ensures that the backend servers send return traffic back through the BIG- IP, which is necessary for the ADC to process the traffic correctly. However, a side effect of SNAT is that the backend servers only see the BIG-IP's IP in their logs, losing visibility into the true identity of the client.
To resolve this while still using SNAT for routing purposes, the administrator must configure the BIG-IP to
"pass" the client's IP address at the application layer. This is achieved by using an HTTP Profile with the Insert X-Forwarded-For setting enabled. When this profile is applied to the Virtual Server, the BIG-IP intercepts the HTTP request, adds a header (X-Forwarded-For) containing the client's original IP, and then forwards the modified request to the server. The backend web server can then be configured to read this header and log the original client IP instead of the BIG-IP's SNAT address.
Other options are incorrect for this requirement. Performance (HTTP) (Option A) is a virtual server type optimized for speed but often lacks the full Layer 7 header manipulation capabilities of a Standard Virtual Server. SNAT Pool with the client IP (Option C) is technically impossible as SNAT pools use static, pre- defined IPs. There is no such thing as an HTTP Transparent profile (Option D) in standard BIG-IP administration for this purpose. The X-Forwarded-For header insertion within the HTTP profile is the standard procedural method for maintaining client visibility in SNAT-enabled environments.
질문 # 59
Refer to the exhibit.
A BIG-IP Administrator needs to configure health monitors for a newly configured server pool named Pool_B.
Which health monitor settings will ensure that all pool members will be accurately marked as available or unavailable? (Choose one answer)
정답：A
설명：
From the exhibit, the pool contains different applications on different service ports (for example, HTTP/80, FTP/21, HTTPS/443, SSH/22). To mark pool members correctly, BIG-IP must be able to verify the actual service running on each member's port.
In BIG-IP Administration: Data Plane Configuration, monitor behavior is described as follows:
When multiple monitors are assigned to a pool, the Availability Requirement controls how monitor results are evaluated:
At least one = the pool member is marked up if any one of the assigned monitors succeeds.
All = the pool member is marked up only if every assigned monitor succeeds.
For pools containing members with different services/ports, using All can incorrectly mark members down because monitors intended for other services will fail on the wrong port.
Why C is correct:
Assigning HTTPS, HTTP, FTP, and SSH covers the actual services shown in the pool.
Setting the Availability Requirement to at least one ensures that each pool member is considered available when its appropriate service monitor succeeds, without being forced to pass unrelated service monitors.
Why the other options are incorrect:
A / D (Availability Requirement = all): would cause members to be marked down when unrelated monitors fail (e.g., SSH monitor against an HTTP member).
B (includes ICMP): ICMP can indicate the host is reachable even if the application service is down, which does not "accurately" reflect service availability.
Therefore, the best choice is HTTPS, HTTP, FTP, and SSH with Availability Requirement of at least one health monitor.
질문 # 60
Application administrators are reporting that nodes different from those configured in the pool are selected.
The use of an iRule is suspected. How can the BIG-IP Administrator check if an iRule is used for this traffic?
(Pick the 2 correct responses below)
정답：B,C
설명：
To determine if an iRule is influencing traffic for a specific Virtual Server, the administrator must verify the association between the Virtual Server object and any applied scripts. In the BIG-IP Configuration Utility (GUI), this association is found under the Resources tab of the specific Virtual Server. While there is an " iRules " sub-menu under Local Traffic, checking the Virtual Server ' s Resources tab is the definitive way to see which specific rules are currently active and in what order they are being processed for that particular traffic flow.
From the Command Line Interface (CLI), the tmsh list /ltm virtual < virtual_server > command provides a full text-based output of the virtual server ' s configuration. If iRules are applied, they will appear within a " rules { ... } " block in the command output. This is more effective than Option A, which only lists the contents of the iRule itself but does not show if or where it is applied. Option C is a common misconception; while some versions of the GUI have reorganized menus, the standard location for managing the association of profiles, policies, and iRules to a Virtual Server remains the " Resources " section. By identifying the applied iRule, an administrator can then review the script logic-often containing commands like pool or node-to see if it is overriding the default pool selection based on specific HTTP headers, URI paths, or client IP addresses.
질문 # 61
Exhibit:
Due to a change in application requirements, a BIG-IP Administrator needs to modify the configuration of a Virtual Server to include a Fallback Persistence Profile. Which persistence profile type should the BIG-IP Administrator use for this purpose?
정답：A
설명：
In a BIG-IP environment, a Fallback Persistence Profile is utilized as a secondary " stickiness " mechanism when the primary (Default) persistence method fails to provide a valid persistence record. For example, if a Virtual Server uses HTTP Cookie Persistence as its primary method, but a client's browser has cookies disabled, the BIG-IP will be unable to find a persistence cookie in the request. Without a fallback method, the system would treat every request from that client as a new, independent connection, potentially breaking the application session.
Source Address Affinity (also known as Source Address Persistence) is the most common and standard choice for a fallback profile. It operates at the network layer (Layer 3) by tracking the client's source IP address.
Because every IP packet contains a source address, this method is virtually guaranteed to work even when application-layer data (like Cookies or SSL Session IDs) is missing or encrypted beyond the BIG-IP ' s visibility. While Universal (Option A) and Hash (Option D) profiles are highly flexible and can use iRules to persist on almost any data, they require specific configuration and logic that may not always be present or valid. SSL persistence (Option C) relies on the SSL Session ID, which frequently changes due to modern browser security practices (session renegotiation), making it less reliable than Source Address Affinity. By configuring Source Address Affinity as the fallback, the administrator ensures that the BIG-IP has a " safety net " to maintain session integrity based on the client ' s IP address when the more granular cookie-based persistence is unavailable.
질문 # 62
A BIG-IP Administrator configures an SSH pool with five members.
Which health monitor should be applied?
정답：D
설명：
SSH is a TCP-based service. A TCP monitor validates service availability without requiring application-layer inspection.
질문 # 63
......
Pass4Test의 F5인증 F5CAB3시험덤프자료는 여러분의 시간,돈 ,정력을 아껴드립니다. 몇개월을 거쳐 시험준비공부를 해야만 패스가능한 시험을Pass4Test의 F5인증 F5CAB3덤프는 며칠간에도 같은 시험패스 결과를 안겨드릴수 있습니다. F5인증 F5CAB3시험을 통과하여 자격증을 취득하려면Pass4Test의 F5인증 F5CAB3덤프로 시험준비공부를 하세요.
F5CAB3시험대비 덤프공부: https://www.pass4test.net/F5CAB3.html
그 외, Pass4Test F5CAB3 시험 문제집 일부가 지금은 무료입니다: https://drive.google.com/open?id=1ZZVpk4Ups4CoAvR5rwJ5_N9PcVvq5lNR