Our NSE6_FNC_AD-7.6 exam questions are easy to purchase. You can just add it to the cart and pay for it with your credit card or PAYPAL. And we will send it to you in 5 to 10 minutes after your paied successfully. If we have a new version of the NSE6_FNC_AD-7.6 Study Material, we will send an E-mail to you. Whenever you have questions about our NSE6_FNC_AD-7.6 training braindumps, you are welcome to contact us via E-mail. We sincerely offer you 24/7 online service.
| Section | Objectives |
|---|---|
| Concepts and Initial Configuration | - Explain isolation networks and the configuration wizard - Model and organize infrastructure devices |
| Deployment and Provisioning | - Configure and monitor high availability (HA) - Configure access control on FortiNAC-F - Configure FortiNAC-F security policies - Configure security automation |
| Network Visibility and Monitoring | - Explain and configure device profiling - Use logging options available on FortiNAC - Troubleshoot network devices and device status - Guests and contractors |
| Integration | - Configure and use FortiNAC-F Manager - Integrate with third-party devices using Syslog and SNMP trap input - Explain and configure MDM integration |
>> Test NSE6_FNC_AD-7.6 Practice <<
You can use this Fortinet NSE6_FNC_AD-7.6 version on any operating system, and this software is accessible through any browser like Opera, Safari, Chrome, Firefox, and IE. You can easily assess yourself with the help of our NSE6_FNC_AD-7.6 practice software, as it records all your previous results for future use.
NEW QUESTION # 61
Where should you configure MAC notification traps on a supported switch?
Answer: D
Explanation:
In FortiNAC-F,MAC notification traps(also known as MAC Move or MAC Change traps) are essential for achieving real-time visibility of endpoint connections and disconnections. When a device connects to a switch port, the switch generates an SNMP trap that informs FortiNAC-F of the new MAC address on that specific interface. This allows FortiNAC-F to immediately initiate the profiling and policy evaluation process without waiting for the next scheduled L2 poll.
According to theFortiNAC-F Administration GuideandSwitch Integrationdocumentation, MAC notification traps should be configured onall ports except uplink ports. Uplink ports are the interfaces that connect one switch to another or to the core network. Because these ports see the MAC addresses of every device on the downstream switches, enabling MAC notification on uplinks would cause the switch to send a massive volume of redundant traps to FortiNAC-F every time any device anywhere in the downstream branch moves or reconnects. This can overwhelm the FortiNAC-F process queue and degrade system performance.
By only enabling these traps on " edge " or " access " ports-where individual endpoints like PCs, printers, and VoIP phones connect-FortiNAC-F receives precise data regarding exactly where a device is physically located. Uplinks should be identified in the FortiNAC-F inventory as " Uplink " or " Learned Uplink, " which tells the system to ignore MAC data seen on those specific ports.
" To ensure accurate host tracking and optimal system performance, SNMP MAC notification traps must be enabled on all access (downlink) ports.Do not enable MAC notification traps on uplink ports, as this will result in excessive and unnecessary trap processing. Uplink ports should be excluded to prevent the system from attempting to map multiple downstream MAC addresses to a single infrastructure interface. " - FortiNAC-F Administration Guide: SNMP Configuration for Network Devices.
NEW QUESTION # 62
An administrator wants to continually monitor endpoints for the existence of a specific registry key and the status of a required security service. Which two requirements must be in place for the administrator to use FortiNAC-F compliance monitors? (Choose two.)
Answer: A,B
Explanation:
The correct answers are B and C . FortiNAC-F must have a persistent agent on the endpoint if the goal is continual or background endpoint monitoring. The study guide states that the persistent agent is an install-and- stay resident agent and that, after deployment, it communicates back to FortiNAC-F every 15 minutes. It also performs scheduled scans in the background without normal user interaction unless the scan fails. That is the agent model required for continuous compliance monitoring, not a one-time captive portal scan.
A custom scan is also required because the administrator wants to check very specific endpoint conditions: a registry key and a security service. The FortiNAC-F study guide lists Windows custom scan types including Registry Keys and Service , which directly match the two conditions in the question.
Option A is wrong because MDM integration is used to synchronize mobile device data, retrieve MDM- known hosts, receive MDM host updates, and apply policies based on MDM attributes; it is not the required mechanism for checking Windows registry keys or Windows service status. Option D is wrong because a remediation admin scan is not what defines the compliance check itself. The compliance logic must be created as a custom scan, and continuous monitoring requires the persistent agent.
NEW QUESTION # 63
Refer to the exhibit. What would FortiNAC-F generate if only one of the security fitters is satisfied?
Answer: D
Explanation:
In FortiNAC-F, Security Triggers are used to identify specific security-related activities based on incoming data such as Syslog messages or SNMP traps from external security devices (like a FortiGate or an IDS). These triggers act as a filtering mechanism to determine if an incoming notification should be escalated from a standard system event to a Security Event.
According to the FortiNAC-F Administrator Guide and relevant training materials for versions 7.2 and 7.4, the Filter Match setting is the critical logic gate for this process. As seen in the exhibit, the "Filter Match" configuration is set to "All". This means that for the Security Trigger named
"Infected File Detected" to "fire" and generate a Security Event or a subsequent Security Alarm, every single filter listed in the Security Filters table must be satisfied simultaneously by the incoming data.
In the provided exhibit, there are two filters: one looking for the Vendor "Fortinet" and another looking for the Sub Type "virus". If only one of these filters is satisfied (for example, a message from Fortinet that does not contain the "virus" subtype), the logic for the Security Trigger is not met. Consequently, FortiNAC-F does not escalate the notification. Instead, it processes the incoming data as a Normal Event, which is recorded in the Event Log but does not trigger the automated security response workflows associated with security alarms.
"The Filter Match option defines the logic used when multiple filters are defined. If 'All' is selected, then all filter criteria must be met in order for the trigger to fire and a Security Event to be generated. If the criteria are not met, the incoming data is processed as a normal event. If 'Any' is selected, the trigger fires if at least one of the filters matches."
NEW QUESTION # 64
When configuring FortiNAC-F to manage FortiGate VPN users, an endpoint compliance policy must be created for the integration.
Why is the endpoint compliance policy necessary for this type of integration?
Answer: A
Explanation:
The integration of FortiNAC-F with FortiGate VPN requires a specific policy workflow to bridge the gap between initial user authentication and full network access. When a user connects to the VPN, the FortiGate typically provides the User ID and IP address, but FortiNAC-F requires a MAC address to uniquely identify and manage the endpoint's record.
According to the FortiGate VPN Integration Guide, the Endpoint Compliance Policy is a mandatory component of this setup because it is used to designate the required agent type.
Because a VPN connection is Layer 3, FortiNAC cannot "see" the MAC address through traditional SNMP or L2 polling. The compliance policy instructs the system to present a Captive Portal to the remote user, requiring them to download and run either the Persistent or Dissolvable Agent. The agent then reports the device's MAC address back to FortiNAC, allowing the system to correlate the VPN session with a host record.
Once the agent is running and the MAC is known, FortiNAC-F can evaluate the device's security posture (if scanning is configured) and send the necessary FSSO tags back to the FortiGate to lift the initial network restrictions. Without the compliance policy to enforce the agent requirement, the connection would remain in an isolated "IP-only" state with no unique hardware identity.
"The Endpoint Compliance Policy is necessary to control the agent requirement for VPN users.
Create a default VPN Endpoint Compliance Policy to distribute an agent via captive portal for isolated machines. This policy allows the administrator to designate the required agent type (Persistent or Dissolvable) that will be used to collect the hardware (MAC) address and perform health scans on the remote endpoint."
NEW QUESTION # 65
An administrator wants to create a conference manager administrator account but would like to limit the number of conference accounts that can be generated to 30.
Which statement about conference accounts is true?
Answer: D
Explanation:
In FortiNAC-F, the Conference Manager is a specialized administrative role designed for delegated administration, often used by receptionists or event organizers to create temporary guest accounts. To maintain security and prevent the over-provisioning of credentials, FortiNAC-F allows for granular restrictions on these accounts.
According to the FortiNAC-F Administration Guide regarding Administrative Profiles, when an administrator creates a profile for a Conference Manager, they can define specific "Account Limits." Under the profile settings (located in System > Settings > Admin Profiles), there is a field specifically for "Max Accounts." By entering "30" into this field, the administrator ensures that any user assigned to this profile cannot exceed 30 active conference accounts at any given time.
This setting is distinct from the Portal configuration or the Guest templates. While templates define the type of account (e.g., duration and access level), the Administrative Profile defines the capabilities and limitations of the person creating those accounts. This ensures that even if a guest template allows for unlimited registrations, the specific administrator is physically restricted by the system from generating more than the allotted 30.
"Administrative Profiles define what an administrator can see and do within the system. For delegated administration roles like the Conference Manager, the 'Max Accounts' field in the Administrative Profile is used to specify the maximum number of accounts the user is permitted to create. Once this limit is reached, the user will be unable to generate additional accounts until existing ones expire or are deleted."
NEW QUESTION # 66
......
The talent is everywhere in modern society. This is doubly true for IT field. With the popularity of the computer, hardly anyone can't use a computer. Working in the IT industry, don't you feel pressure? Educational level is not representative of your strength. Education is just a ticket, however really keeping your status is your strength. As IT staff, how to cultivate your strength? It is a good choice to take IT certification test which can not only help you master more skills, also can get the certificate to prove your ability. Do you want to take Fortinet NSE6_FNC_AD-7.6 Exam that is very popular in recent?
Latest NSE6_FNC_AD-7.6 Dumps Questions: https://www.2pass4sure.com/NSE-6-Network-Security-Specialist/NSE6_FNC_AD-7.6-actual-exam-braindumps.html