With the help of our 300-110 training guide, your dream won’t be delayed anymore. Because, we have the merits of intelligent application and high-effectiveness to help our clients study more leisurely on our 300-110 practice questions. If you prepare with our CCNP Wireless actual exam for 20 to 30 hours, the exam will become a piece of cake in front of you. And the pass rate of our 300-110 learning guide is high as 98% to 100%, you will be satisfied with it if you buy it.
| Section | Weight | Objectives |
|---|---|---|
| Wireless Infrastructure Design | 30% | - Wired-wireless integration design
|
| Wireless Site Survey | 25% | - Design requirements collection and constraint evaluation
- RF propagation and attenuation analysis - Layer 1 site survey execution and analysis |
| WLAN High Availability and Security Design | 20% | - Management and monitoring design - Security architecture design
|
| Mobility Design | 25% | - Mobility architecture models
- Roaming optimization
|
>> 300-110 Exam Certification Cost <<
In order to meet the requirements of our customers, Our 300-110 test questions carefully designed the automatic correcting system for customers. It is known to us that practicing the incorrect questions is very important for everyone, so our 300-110 exam question provide the automatic correcting system to help customers understand and correct the errors. If you are finding a study material in order to get away from your exam, you can spend little time to know about our 300-110 Test Torrent, it must suit for you.
NEW QUESTION # 88
An engineer is using Ekahau Site Survey to create a WLAN plan for a warehouse. The plan is to use patch antennas. Which setting is adjusted when simulated APs are placed on the map?
Answer: C
Explanation:
In Ekahau Site Survey, when planning a warehouse deployment using patch (directional) antennas, the antenna downtilt setting is the critical adjustment made when placing simulated APs on the floor plan map.
Patch antennas have a defined radiation pattern with a main lobe that must be aimed precisely at the intended coverage zone. In a warehouse environment, APs with patch antennas are typically wall-mounted and aimed down aisles. The downtilt angle determines the vertical component of the antenna ' s aim - adjusting the downtilt in Ekahau tilts the simulated antenna ' s main radiation lobe downward toward the warehouse floor and the working zone of RF scanner devices, rather than projecting RF energy horizontally at an ineffective angle. Ekahau allows engineers to specify the horizontal and vertical orientation of the antenna in three dimensions, and the downtilt value directly controls how the software models the antenna ' s coverage pattern in the vertical plane. AP channel (Option A) is set during channel planning, not during AP placement. Wi-Fi technology (Option B) determines the modulation and protocol standard but is set as an AP property. AP transmission power (Option D) controls cell radius but is set separately from antenna orientation. Reference:
WLSD Study Guide - Ekahau Predictive Survey, Directional Antenna Configuration, Warehouse RF Design and Antenna Orientation.
NEW QUESTION # 89
A customer has two Cisco wireless controllers named WLC-A and WLC-B. Each controller is in a different building on a campus. The WLCs have different Layer 3 interfaces and broadcast the same SSIDs from their respective APs. Users must remain connected to the same VLAN and maintain their IP addresses during roaming from the APs attached to WLC-A and WLC-B. Which action accomplishes the requirement?
Answer: D
Explanation:
The requirement for users to retain their VLAN assignment and IP address when roaming between buildings managed by different WLCs is a Layer 3 roaming scenario. In Cisco's wireless architecture, IP address preservation across controller boundaries is achieved through inter- controller mobility -- specifically the foreign-anchor mobility tunnel mechanism. When a client roams from Building A (WLC-A) to Building B (WLC-B), WLC-B becomes the foreign controller and WLC-A becomes the anchor controller. WLC-B tunnels the client's traffic back to WLC-A, allowing the client to retain its original IP address even while physically associated to an AP managed by WLC-B. This requires creating a mobility group between WLC-A and WLC-B with both controllers configured with the same mobility group name -- the group name is the trust identifier that permits the mobility tunnel and anchor-foreign relationship to form.
NEW QUESTION # 90
A company has three Cisco WLCs that are joined as a mobility group. Mobility multicast messaging is enabled. All the WLCs in the mobility group communicate via a multicast. Which configuration must be identical between the three WLCs to validate communication?
Answer: B
Explanation:
When Cisco WLCs are configured to use multicast for mobility group communications, all WLCs participating in the same mobility group must be configured with an identical multicast group IP address. The mobility multicast mode allows a WLC to send a single multicast frame received simultaneously by all other WLCs in the group, rather than sending individual unicast copies to each peer. For this to function correctly, every WLC in the group must join the same IP multicast group address, and the underlying network infrastructure must be configured to support IP multicast routing or IGMP snooping for that specific group address. If any WLC is configured with a different multicast IP address, it will join a different multicast group and will not receive mobility messages from the other WLCs, effectively isolating it from the group's communication plane.
NEW QUESTION # 91
An engineer is finalizing the design for a WLAN dedicated to wireless VoIP handsets. Which setting should be applied to this WLAN, and why?
Answer: B
Explanation:
Band Select works by suppressing 2.4 GHz probe responses to dual-band capable clients, deliberately withholding replies so the client is nudged toward discovering the 5 GHz radio instead. That suppression introduces delay into the probe and discovery process, which is harmless for a laptop associating once at the start of the day but damaging for a handset attempting to find a roam target while a call is in progress. Cisco's guidance is therefore to disable Band Select on voice WLANs and instead steer handsets to 5 GHz through client configuration or by not enabling the SSID on 2.4 GHz at all. Client Load Balancing should also be disabled on voice WLANs for the same class of reason - it rejects association attempts to encourage the client toward a different AP, which can block a roaming handset from joining the AP it actually needs. Passive Client mode addresses devices that do not send traffic until polled, such as certain industrial controllers, and is unrelated to handset roaming.
NEW QUESTION # 92
An engineer is designing an outdoor mesh network for a container yard. Which two design rules apply to the mesh deployment? (Choose two.)
Answer: B,E
Explanation:
In a Cisco mesh deployment, the Root AP (RAP) has a wired connection to the network and the Mesh APs (MAPs) connect back to it over a wireless backhaul, typically using the 5 GHz radio.
Cisco recommends limiting the mesh to no more than four hops from RAP to the furthest MAP (Option A); while more hops are technically possible, each additional hop increases latency, jitter, and convergence time after a link failure. Backhaul throughput is roughly halved with each hop (Option C) because a MAP that relays traffic must both receive and retransmit each frame on the same half-duplex radio channel, consuming airtime twice. This compounds down the chain, so an eight-hop design delivers negligible usable throughput at the far end. MAPs by definition have no wired uplink, and RAPs and their associated MAPs must share the same bridge group name to form the mesh tree.
NEW QUESTION # 93
......
If you want to finish it with minimum efforts, TestKingIT Cisco 300-110 test questions and answers is your best choice. TestKingIT Cisco 300-110 test contains high quality exam dumps. Like the actual test, TestKingIT test questions and test answers is of the same standard. Now, the best choice is to choose TestKingIT Cisco 300-110 Certification Training for exam preparation. You must pass at 100%. If you fail, FULL REFUND is allowed.
Test 300-110 Sample Online: https://www.testkingit.com/Cisco/latest-300-110-exam-dumps.html