One of our outstanding advantages is our high passing rate, which has reached 99%, and much higher than the average pass rate among our peers. Our high passing rate explains why we are the top JN0-352 prep guide in our industry. One point does farm work one point harvest, depending on strength speech! The source of our confidence is our wonderful JN0-352 Exam Questions. Passing the exam wonโt be a problem as long as you keep practice with our JN0-352 study materials about 20 to 30 hours.
| Section | Objectives |
|---|---|
| Topic 1: BGP | - Attributes and path selection - EBGP and IBGP peer interactions - BGP basic operations and message types |
| Topic 2: Layer 2 Security | - Layer 2 firewall filters - BPDU, loop and root protection - Port security (MAC limiting, DHCP snooping, DAI, IP source guard) - MACsec and storm control |
| Topic 3: Protocol-Independent Routing | - Martian addresses and RIB groups - Static, aggregate, generated routes - Load balancing and filter-based forwarding |
| Topic 4: Spanning Tree | - STP and RSTP concepts, roles and states - Convergence and reconvergence - Bridge Protocol Data Units (BPDUs) |
| Topic 5: OSPF | - Router ID, adjacencies and neighbors - Link-state database and packet types - Areas and LSA types |
| Topic 6: High Availability | - Link Aggregation Groups and RTG - VRRP, NSR, NSB and BFD - Virtual chassis and graceful restart |
| Topic 7: IS-IS | - Levels, areas and metrics - Adjacencies and troubleshooting - Link-state database and PDUs |
| Topic 8: Layer 2 Switching and VLANs | - Frame processing - Bridging components - Inter-VLAN routing - Native VLANs and voice VLANs - Ports and VLAN tagging |
| Topic 9: Tunnels | - GRE and IP-IP configuration and troubleshooting - IP tunneling concepts |
TestKingIT's Juniper JN0-352 exam training materials' simulation is particularly high. You can encounter the same questions in the real real exam. This only shows that the ability of our IT elite team is really high. Now many ambitious IT staff to make their own configuration files compatible with the market demand, to realize their ideals through these hot IT exam certification. Achieved excellent results in the Juniper JN0-352 Exam. With the Juniper JN0-352 exam training of TestKingIT, the door of the dream will open for you.
NEW QUESTION # 119
In the exhibit, each IP subnet in the campus environment is associated with a unique VLAN ID.
Which action will ensure that Host C will communicate with Host A and Host B?
Answer: D
NEW QUESTION # 120
What are two characteristics of IS-IS? (Choose two.)
Answer: C,D
Explanation:
IS-IS (Intermediate System to Intermediate System) was designed by ISO as a link-state Interior Gateway Protocol for routing within a single autonomous system, functioning on a hierarchical two-level model conceptually similar to OSPF's areas, which makes the first statement unambiguously correct. Within that hierarchy, Level 1 routers maintain detailed topology information only for their own local area and use a default route toward the nearest Level 2 or Level 1/Level 2 router to reach destinations outside the area; they explicitly do not carry inter-area topology information and therefore cannot route traffic between areas on their own. Routers that participate in both levels simultaneously - Level 1/Level 2 (L1/L2) routers - sit at the area boundary, maintaining a Level 1 database for their local area and a Level 2 database for the backbone, and it is specifically these dual-level routers that stitch inter-area traffic together, forwarding packets from the local area into the Level 2 backbone and vice versa, which confirms the second correct statement. Regarding route preference, Junos assigns distinct default preference (administrative distance) values of 15 for IS-IS Level 1 routes and 18 for IS-IS Level 2 routes - neither of which is 20 - so the preference-value statement is factually incorrect and included as a distractor testing precise knowledge of Junos default protocol preferences. Reference topics: Junos Enterprise Routing - IS-IS, Level 1, Level 2, and L1/L2 Router Roles; Default Route Preference Values.
NEW QUESTION # 121 
Click the Exhibit button.
You configure the aggregate route 172.16.0.0/16 on router R1. The routing table currently contains active routes for 172.16.10.0/24 and 172.16.99.0/24. No other more-specific routes exist.
Referring to the exhibit, which statement describes what R1 would do with traffic destined to 172.16.200.5?
Answer: A
Explanation:
The destination address 172.16.200.5 falls within the 172.16.0.0/16 aggregate's summarized range but does not fall within either of the two active, more-specific contributing routes actually present in the table -
172.16.10.0/24 and 172.16.99.0/24 - meaning no route more specific than the /16 itself exists to cover it.
Under Junos's longest-match forwarding logic, the lookup for 172.16.200.5 therefore resolves to the aggregate route itself, and since aggregate routes are installed by default with a reject next hop rather than any real forwarding path, the router drops the packet and simultaneously generates an ICMP destination-unreachable message back to the originating source, explicitly signaling that no valid path exists for that specific destination even though a covering summary is being advertised. This reject behavior is precisely why aggregate routes are valuable for reducing the number of routes advertised upstream while still providing clear, immediate feedback for traffic aimed at address space within the summary that has no genuine underlying route, rather than silently black-holing it or misdirecting it toward an unrelated contributing route's next hop. The aggregate route itself remains active and installed throughout this process - a gap in contributing coverage does not deactivate the aggregate, since the aggregate's activation depends only on at least one contributing route being active, which is satisfied here by both existing /24 blocks. There is also no default route present in this scenario to fall back upon. Reference topics: Junos Enterprise Routing - Protocol Independent Routing, Aggregate Route Reject Behavior for Uncovered Address Space.
NEW QUESTION # 122
Click the Exhibit button. You want the RSTP primary root path from switch C to traverse switch B.
Referring to the exhibit, which solution will accomplish this task?
Answer: A
Explanation:
Switch A is already fixed as the root bridge in this topology (priority 0), so the outcome being engineered here is not about root bridge election at all, but about which of Switch C's two available paths toward that already-established root -- the direct C-to-A link, or the indirect C-to- B-to-A path -- RSTP selects as the lower-cost, primary path. RSTP's path-cost calculation for any non-root switch sums the port costs of every link along a candidate path to the root and always selects whichever candidate path has the lowest total accumulated cost as that switch's active root path, placing the corresponding local port into the forwarding root port role while any higher- cost alternative path is placed into a non-forwarding (alternate) role. To force Switch C to prefer routing through Switch B rather than connecting to Switch A directly, the administrator must make the direct C-to-A link's cost higher than the combined cost of the C-to-B link plus the B-to-A link added together, so that the indirect, two-hop path through Switch B mathematically totals to a lower cumulative cost than the single direct hop, causing RSTP's cost comparison to favor the indirect path as primary. Setting Switch B's priority (to either 1 or 0) is irrelevant here, since Switch B is not a root bridge candidate in this scenario and priority manipulation would only affect a root bridge election, not path cost preference between a fixed root and a downstream switch.
Lowering the direct link's cost, the inverse of the correct answer, would instead reinforce the direct path rather than override it.
NEW QUESTION # 123
What are two purposes of an aggregate route? (Choose two.)
Answer: C,D
NEW QUESTION # 124
......
If you feel that you purchase TestKingIT Juniper JN0-352 exam training materials, and use it to prepare for the exam is an adventure, then the whole of life is an adventure. Gone the furthest person is who are willing to do it and willing to take risks. Not to mention that TestKingIT Juniper JN0-352 exam training materials are many candidates proved in practice. It brings the success of each candidate is also real and effective. Dreams and hopes are important, but more important is to go to practice and prove. The TestKingIT Juniper JN0-352 Exam Training materials will be successful, select it, you have no reason unsuccessful !
JN0-352 Valid Test Forum: https://www.testkingit.com/Juniper/latest-JN0-352-exam-dumps.html