BTW, DOWNLOAD part of Real4dumps F5CAB3 dumps from Cloud Storage: https://drive.google.com/open?id=1pZTR56JyacsGYV7nQRv1MIA5Z2tR22fI
Do you want to pass the F5CAB3 exam by the first attempt? Our F5CAB3 exam questons can be our best assistant on your way to success. And the pass rate of our F5CAB3 study guide is high as 98% to 100%, which also prove our excellent quality. If you study with our F5CAB3 praparation guide, they will strengthen your learning skilles, add to your knowledge and will enable you to revise the entire syllabus more than once. And you will pass for sure with our F5CAB3 learning quiz.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
>> F5CAB3 Training Solutions <<
About F5 F5CAB3 Exam, each candidate is very confused. Everyone has their own different ideas. But the same idea is that this is a very difficult exam. We are all aware of F5 F5CAB3 exam is a difficult exam. But as long as we believe Real4dumps, this will not be a problem. Real4dumps's F5 F5CAB3 exam training materials is an essential product for each candidate. It is tailor-made for the candidates who will participate in the exam. You will absolutely pass the exam. If you do not believe, then take a look into the website of Real4dumps. You will be surprised, because its daily purchase rate is the highest. Do not miss it, and add to your shoppingcart quickly.
NEW QUESTION # 35
A BIG-IP Administrator uses backend servers to host multiple services per server. There are multiple virtual servers and pools defined, referencing the same backend servers.
Which load balancing algorithm is most appropriate to have an equal number of connections on each backend server?
Answer: A
Explanation:
Least Connections (node) balances connections across the physical server regardless of how many services or pool members exist on that node.
NEW QUESTION # 36
Refer to the exhibit.
A BIG-IP Administrator needs to configure health monitors for a newly configured server pool named Pool_B.
Which health monitor settings will ensure that all pool members will be accurately marked as available or unavailable? (Choose one answer)
Answer: C
Explanation:
From the exhibit, the pool contains different applications on different service ports (for example, HTTP/80, FTP/21, HTTPS/443, SSH/22). To mark pool members correctly, BIG-IP must be able to verify the actual service running on each member's port.
In BIG-IP Administration: Data Plane Configuration, monitor behavior is described as follows:
* When multiple monitors are assigned to a pool, the Availability Requirement controls how monitor results are evaluated:
* At least one = the pool member is marked up if any one of the assigned monitors succeeds.
* All = the pool member is marked up only if every assigned monitor succeeds.
* For pools containing members with different services/ports, using All can incorrectly mark members down because monitors intended for other services will fail on the wrong port.
Why C is correct:
* Assigning HTTPS, HTTP, FTP, and SSH covers the actual services shown in the pool.
* Setting the Availability Requirement to at least one ensures that each pool member is considered available when its appropriate service monitor succeeds, without being forced to pass unrelated service monitors.
Why the other options are incorrect:
* A / D (Availability Requirement = all): would cause members to be marked down when unrelated monitors fail (e.g., SSH monitor against an HTTP member).
* B (includes ICMP): ICMP can indicate the host is reachable even if the application service is down, which does not "accurately" reflect service availability.
Therefore, the best choice is HTTPS, HTTP, FTP, and SSH with Availability Requirement of at least one health monitor.
NEW QUESTION # 37
Refer to the exhibit.
DNS queries from two internal DNS servers are being load-balanced to external DNS servers via a virtual server on a BIG-IP device. The DNS queries originate from:
192.168.10.100
192.168.10.200
and target:
192.168.2.150
All DNS queries destined for the external DNS servers fail.
Which property change should the BIG-IP Administrator make in the Virtual Server to resolve this issue?
(Choose one answer)
Answer: A
Explanation:
DNS traffic is primarily transported using UDP port 53. In the exhibit, the Virtual Server is configured with the Protocol set to TCP, which prevents standard DNS queries from being processed correctly. BIG-IP Virtual Servers must be configured with the correct Layer 4 protocol to match the application traffic they are handling.
According to the BIG-IP Administration: Data Plane Configuration documentation:
* The Protocol setting on a Virtual Server defines whether traffic is processed as TCP, UDP, or another supported transport protocol.
* Standard DNS queries and responses use UDP, while TCP is only required for DNS zone transfers (AXFR) or exceptionally large responses.
* When a DNS Virtual Server is incorrectly configured with TCP, UDP-based DNS queries are dropped, causing all requests to fail.
Why the other options are incorrect:
* A. Protocol profile (Client) to DNS_OPTIMIZEDA DNS profile enhances DNS functionality but does not correct an incorrect transport protocol configuration.
* B. Type to Performance (HTTP)Performance (HTTP) Virtual Servers are designed for HTTP traffic and are not suitable for DNS services.
* C. Source Address to 192.168.10.0/24The existing source IPs already fall within the allowed range, so this setting does not address the failure.
Correct Resolution:
Changing the Protocol to UDP aligns the Virtual Server with standard DNS transport requirements, allowing DNS queries to be successfully processed and load-balanced.
NEW QUESTION # 38
Refer to the exhibit.
A BIG-IP Administrator creates a new Virtual Server to load balance SSH traffic. Users are unable to log on to the servers.
What should the BIG-IP Administrator do to resolve the issue? (Choose one answer)
Answer: A
Explanation:
SSH is a Layer 4 TCP-based protocol that operates on TCP port 22 and does not use HTTP in any capacity. In the exhibit, the Virtual Server is configured with an HTTP Profile applied, which is inappropriate for SSH traffic and causes connection failures.
According to the BIG-IP Administration: Data Plane Configuration documentation:
* An HTTP profile must only be applied to Virtual Servers handling HTTP or HTTPS traffic.
* When an HTTP profile is attached, BIG-IP expects HTTP headers and attempts to parse application- layer data.
* Non-HTTP protocols such as SSH, FTP (control), SMTP, and other raw TCP services will fail if an HTTP profile is enabled.
Why the other options are incorrect:
* A. Set Protocol to UDPSSH uses TCP, not UDP. Changing the protocol would break SSH entirely.
* B. Set Source Address to 10.1.1.2The source address setting controls client access restrictions and is unrelated to protocol parsing issues.
* C. Set Destination Address/Mask to 0.0.0.0/0The destination address is already valid for a specific SSH service and does not impact protocol handling.
Correct Resolution:
The BIG-IP Administrator should remove the HTTP Profile (set it to None) so the Virtual Server functions as a pure Layer 4 TCP service, allowing SSH connections to pass through successfully.
NEW QUESTION # 39
Refer to the exhibit.
A BIG-IP Administrator creates a new Virtual Server to load balance SSH traffic. Users are unable to log on to the servers.
What should the BIG-IP Administrator do to resolve the issue? (Choose one answer)
Answer: A
Explanation:
SSH is a Layer 4 TCP-based protocol that operates on TCP port 22 and does not use HTTP in any capacity. In the exhibit, the Virtual Server is configured with an HTTP Profile applied, which is inappropriate for SSH traffic and causes connection failures.
According to the BIG-IP Administration: Data Plane Configuration documentation:
An HTTP profile must only be applied to Virtual Servers handling HTTP or HTTPS traffic.
When an HTTP profile is attached, BIG-IP expects HTTP headers and attempts to parse application-layer data.
Non-HTTP protocols such as SSH, FTP (control), SMTP, and other raw TCP services will fail if an HTTP profile is enabled.
Why the other options are incorrect:
A . Set Protocol to UDP
SSH uses TCP, not UDP. Changing the protocol would break SSH entirely.
B . Set Source Address to 10.1.1.2
The source address setting controls client access restrictions and is unrelated to protocol parsing issues.
C . Set Destination Address/Mask to 0.0.0.0/0
The destination address is already valid for a specific SSH service and does not impact protocol handling.
Correct Resolution:
The BIG-IP Administrator should remove the HTTP Profile (set it to None) so the Virtual Server functions as a pure Layer 4 TCP service, allowing SSH connections to pass through successfully.
NEW QUESTION # 40
......
If you haplessly fail the F5CAB3 exam, we treat it as our responsibility then give you full refund and get other version of F5CAB3 practice material for free. That is why we win a great deal of customers around the world. Especially for those time-sensitive and busy candidates, all three versions of F5CAB3 Exam Questions can be chosen based on your preference. Such as app version of our F5CAB3 learning guide, you can learn it using your phone without the limitation of place or time.
Reliable F5CAB3 Test Camp: https://www.real4dumps.com/F5CAB3_examcollection.html
P.S. Free 2026 F5 F5CAB3 dumps are available on Google Drive shared by Real4dumps: https://drive.google.com/open?id=1pZTR56JyacsGYV7nQRv1MIA5Z2tR22fI