DOWNLOAD the newest ExamTorrent Civil-Engineering-Technology PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1h7ni5BAU4Y6xKTM_c3z0boFo1kI2gBtg
You may doubt about such an amazing data, which is unimaginable in this industry. But our Civil-Engineering-Technology exam questions have made it. You can imagine how much efforts we put into and how much we attach importance to the performance of our Civil-Engineering-Technology study materials. We use the 99% pass rate to prove that our Civil-Engineering-Technology practice materials have the power to help you go through the exam and achieve your dream. Most candidates show their passion on our Civil-Engineering-Technology guide materials, because we guarantee all of the customers that you will pass for sure with our Civil-Engineering-Technology exam questions.
| Section | Weight | Objectives |
|---|---|---|
| Transportation Engineering | 15% | - Highway & Road Design
|
| Geotechnical Engineering | 18% | - Soil Mechanics & Foundation Engineering
|
| Civil Engineering Fundamentals | 25% | - Engineering Mathematics & Applied Science
|
| Construction Management & Materials | 10% | - Construction Methods & Project Management
|
| Structural Engineering | 20% | - Structural Analysis & Design
|
| Water Resources & Environmental Engineering | 12% | - Hydrology & Water Systems
|
>> Civil-Engineering-Technology Test Practice <<
As is known to us, the quality is an essential standard for a lot of people consuming movements, and the high quality of the Civil-Engineering-Technology study materials is always reflected in the efficiency. We are glad to tell you that the Civil-Engineering-Technology study materials from our company have a high quality and efficiency. If you decide to choose our study materials as you first study tool, it will be very possible for you to pass the Civil-Engineering-Technology Exam successfully, and then you will get the related certification in a short time.
NEW QUESTION # 13
A cologist is required to inspect the installation of a sanitary service pipe to confirm the slope. The technologist measures an elevation of 705.667 at the end of the service and 705.202 at the main. The horizontal measurement from the main to the end of the service is 22.10 m. What is the slope of the pipe?
Answer: C
Explanation:
Pipe slope is computed asrise (or fall) divided by run, expressed as a percent:
This matches standard civil engineering definitions of grade/slope as elevation change over horizontal distance.
Here, the elevation drop from the service end to the ma5.202 =0.465 m.
Horizontal distance (run) =22.10 m.
Slope = 0.465 / 22.10 = 0.02104 =2.104%, which rounds to2.1%.
This calculation reflects standard practice used in roadway and pipeline work for checking grades, confirming that installed utilities meet design slopes for gravity flow. The answer choice that matches the computed slope is2.1% (Option C).
NEW QUESTION # 14
What information is provided by a 5-point Proctor density test on a soil sample?
Answer: C
Explanation:
A Proctor compaction test is performed by compacting the same soil at several different moisture contents, calculatingdry densityfor each point, and plotting dry density versus moisture content to form thecompaction curve. The curve's peak defines two key outputs:maximum dry density (MDD)and its corresponding optimum moisture content (OMC). Standard descriptions note the test is commonly run at aboutfive moisture contents("5-point" curve) specifically to determineand. These outputs are then used in specifications and field QA/QC (relative compaction and moisture window). The test does not directly give maximum particle size (that's from gradation/sieve analysis), nor does it define "maximum density at current moisture" as a standalone acceptance criterion. Therefore, the correct statement is that a 5-point Proctor providesmaximum density at optimum moisture content.
NEW QUESTION # 15
A soil sample has a porosity of 40%, and the specific gravity of solids is 2.60. What would be the approximate value of dry density of the soil if the soil is completely saturated?
Answer: D
Explanation:
For soils, porosityand void ratioare related by. With,
Dry unit weight (often called dry density in kN/m³ terms) is:
whereis specific gravity of solids and. Substituting:
Note that "completely saturated" affects thebulk/saturated unit weight, but thedryunit weight depends only on the solids content (via) and void structure (via), not on how much water occupies the voids. These phase- relationship calculations are standard in soil mechanics.
NEW QUESTION # 16
A civil engineering technologist is installing offset stakes for centreline at 25-metre stations. What information is typically found on the stakes?
Answer: C
Explanation:
Offset stakes are used to carry alignment control when the true centreline point is impractical to occupy (e.g., within excavation, traffic, or unstable ground). Standard field staking practice marks the station and identifies theoffset distanceto the actual centreline so crews can pull the correct perpendicular distance back to the design line. Because construction also needs grade control, the stake commonly includes thecentreline elevation (or cut/fill to grade)at that station to guide grading or excavation. Surveying and construction layout practice emphasize that stakes should communicate the essential geometry:wherethe design line is (by station and offset) andwhat elevation/gradeapplies at that location. Options involving ditch depth or top-of- cut are specific to slope/ditch staking rather than centreline offset stakes. Therefore, the typical information on centreline offset stakes iscentreline elevation and offset distance.
NEW QUESTION # 17
What is a silt fence used for?
Answer: A
Explanation:
A silt fence is an erosion and sediment control measure intended toretain sedimentcarried by runoff, reducing offsite sedimentation. Lindeburg describes temporary silt fences as measures using posts and filter cloth (e.g., filter fabric) placed on the upstream side toretain suspended silt particles in runoff water. This purpose is to reducesoil movement(sediment transport) caused by erosion processes during construction, especially oalong drainage paths where siltation is expected. The fence does not "stop water" (runoff still passes through while sediment is filtered), is not primarily a site limit marker, and is not an access control barrier for the public. Therefore, the correct statement is that a silt fence is usedto prevent soil from moving through the site due to erosion.
NEW QUESTION # 18
......
Our CTTAM Civil-Engineering-Technology Practice Exam software is compatible with Windows computers. If you run into any issues while using our Technical Examination - Civil Engineering Technology C.E.T (Civil-Engineering-Technology) exam simulation software, our 24/7 product support team is here to help you. One of our Civil-Engineering-Technology desktop practice exam software's other feature is that it can be used even without an active internet connection. The Internet is only required for product license validation. This feature allows users to practice without an active internet connection.
Civil-Engineering-Technology Valid Study Questions: https://www.examtorrent.com/Civil-Engineering-Technology-valid-vce-dumps.html
What's more, part of that ExamTorrent Civil-Engineering-Technology dumps now are free: https://drive.google.com/open?id=1h7ni5BAU4Y6xKTM_c3z0boFo1kI2gBtg