What's more, part of that RealExamFree NSE7_FSN_AR-7.6 dumps now are free: https://drive.google.com/open?id=1NSj5FmI1lhMKXk_tNZTfPCkDHCZdzQ3n
You must pay more attention to our NSE7_FSN_AR-7.6 study materials. In order to provide all customers with the suitable study materials, a lot of experts from our company designed the NSE7_FSN_AR-7.6 training materials. Not only that they compile the content of the NSE7_FSN_AR-7.6 praparation quiz, but also they can help our customers deal with all the questions when they buy or download. We can promise that if you buy our NSE7_FSN_AR-7.6 learning guide, it will be very easy for you to pass your exam and get the certification.
| Section | Objectives |
|---|---|
| Enterprise Firewall | - Security profiles
|
| SD-WAN | - Centralized management
|
>> Fortinet NSE7_FSN_AR-7.6 Dumps Vce <<
As is known to us that pass rate is one of the most important standards when candidate choose the practice materials. The pass rate is 98.95% for NSE7_FSN_AR-7.6 training materials, and you can pass and get a certificate successfully. In addition we also pass guarantee and money back guarantee if you fail to pass the exam after using NSE7_FSN_AR-7.6 Exam Dumps. Free update for one year is also available, namely in the following year, you can get latest information about the NSE7_FSN_AR-7.6 training materials. We also have online and offline chat service to solve your confusions.
NEW QUESTION # 72
Refer to the exhibits.
An OSPF peer is advertising route 172.16.52.0/24. The local FortiGate is configured with an inbound distribution list that allows the 172.16.0.0/16 network to be injected into its routing table. However, the 1 '
2.16.52.0/24 subnet cannot be seen in the FIB.
Which two stops can the administrator of the local FortiGate take to ensure that the advertised 172.16. 52.0/24 subnet will be injected into the routing table? (Choose two.)
Answer: C,D
Explanation:
The issue is caused by the strict matching logic of the configured Prefix List.
Current State: The rule is edit 1 with set prefix 172.16.0.0 255.255.0.0 and both ge (greater than or equal) and le (less than or equal) are unset.
Behavior: When ge and le are unset, FortiOS requires an exact match of the subnet mask. The current rule only matches the exact network 172.16.0.0/16. It denies 172.16.52.0/24 because the mask (/24) does not match the rule ' s mask (/16).
To fix this and inject 172.16.52.0/24, you must modify the list to match the /24 mask:
A). Add another entry to the prefix list to specifically allow the 172.16.52.0/24 network:
Creating a new rule (e.g., edit 2) with set prefix 172.16.52.0 255.255.255.0 will provide an exact match for the incoming route, allowing it to pass the distribute-list.
B). Change the ge value to 17:
By configuring set ge 17 on the existing rule (conceptually 172.16.0.0/16 ge 17), you change the logic from " exact match " to " range match " .
This configuration tells the router to match any prefix starting with 172.16.x.x that has a subnet mask length of 17 or greater.
Since the incoming route is a /24, and 24 is greater than 17, the route will match the prefix list and be accepted.
Why other options are incorrect:
C: The option text appears to read " Change the ... value to 16 " . If this refers to le 16, it would enforce the mask to be exactly /16 or less, which still excludes /24.
D: Changing the default behavior to implicit allow defeats the purpose of a filter (security control) and is not a standard configuration step for fixing a single missing route.
Reference:
FortiGate Security 7.6 Study Guide (Routing): " In prefix-lists, if ge and le are not used, the subnet mask must match exactly. To match subnets within a range, you must define the prefix length boundaries using ge or le. "
NEW QUESTION # 73
Refer to the exhibits,
which show the configuration on FortiGate and partial session information for internet traffic from a user on the internal network. If the priority on route ID 2 were changed from 10 to 0, what would happen to traffic matching that user session? (Choose one answer)
Answer: D
Explanation:
The correct answer is A. This behavior is dictated by the configuration command set snat-route-change enable shown in Exhibit 1 under config system global.
Routing Change: By changing the priority of route ID 2 from 10 to 0, it becomes lower than route ID 1 (priority 5). In FortiOS, a lower priority value indicates a more preferred route. Consequently, the active route for the destination changes from port1 to port2.
SNAT Implication: The existing session (shown in Exhibit 2) is using Source NAT (SNAT) with the IP address associated with port1 (10.200.1.1). If the traffic were simply switched to port2, the source IP would be incorrect for that interface and the return traffic would likely fail or be dropped.
snat-route-change enable: This specific setting instructs the FortiGate on how to handle established SNAT sessions when a routing change occurs that alters the preferred outgoing interface. When enabled, if a route change forces an SNAT session to a new interface, FortiGate flushes (deletes) the session from the session table. This is necessary because a live TCP session cannot survive a change in its source IP address. The client must initiate a new session, which will then be created using the new correct route (port2) and the corresponding new SNAT IP.
If this setting were disabled, the session would likely remain " sticky " to the original interface (port1) until it closed, provided the route still existed. However, the explicit configuration forces the deletion.
NEW QUESTION # 74
Refer to the exhibit, which shows the output of get router info bgp summary.
Which two statements are true? (Choose two.)
Answer: A,B
Explanation:
The get router info bgp summary output lists BGP neighbor status:
Prefix Reception: The " State/PfxRcd " column shows the number of prefixes received from the neighbor- neighbor 100.64.1.254 has " 1 " , confirming option A.
Received Message Count: Under " MsgRcvd " , 18 packets have been received from neighbor 100.64.1.254.
This matches option C.
The second neighbor 100.64.2.254 is in " Active " state and has received/sent 0 packets, indicating that its TCP connection is NOT established, disproving option B.
There is no indication anywhere that the router is " still calculating " prefixes; " Active " just means no session is established, so option D is incorrect.
References:
FortiOS BGP Command Reference: BGP Neighbor States, PfxRcd, and Counters
NEW QUESTION # 75
Refer to the exhibit.
You used the SD-WAN overlay orchestrator to prepare an IPsec tunnel configuration for a hub-and-spoke SD- WAN topology. The exhibit shows the FortiManager installation preview for one FortiGate device.
Based on the exhibit, which statement correctly describes the configuration applied to the FortiGate device?
Answer: A
Explanation:
Comprehensive and Detailed 100 to 150 words of Explanation From Secure Networking Architect Study Guides topics:
The installation preview contains two decisive settings: set type dynamic and set auto-discovery-sender enable. Fortinet recommends a dynamic IPsec tunnel on the hub because the hub acts as the dial-up server and does not need the public addresses of all spokes in advance. More importantly, auto-discovery-sender enable identifies the device as the ADVPN hub role responsible for generating shortcut offers.
The Enterprise Firewall 7.6 guide explains that when IPsec traffic transits an ADVPN hub, the sender setting causes the hub to send a shortcut offer to the initiating spoke, indicating that a more direct connection can be established. A spoke normally uses a static tunnel toward its known hub and operates as an ADVPN receiver.
Therefore, C accurately identifies both the device role and its ADVPN behavior.
NEW QUESTION # 76
Refer to the exhibit.
Which two statements about the output are true, considering NGFW-1 and NGFW-2 have been up for a week? (Choose two.)
Answer: B,D
Explanation:
The correct answers are A and B.
The exhibit shows:
override: disable
both members are currently in-sync
only port7 appears under HBDEV stats, so it is the active heartbeat interface the cluster is in HA A-P mode Why A is correct:
With override disabled, after a failover the new primary keeps that role when the old primary comes back.
The FortiOS administration guide states:
"When the primary FortiGate rejoins the cluster the secondary FortiGate continues to operate as the primary FortiGate." So if FGVM...649 reboots and FGVM...650 becomes primary, FGVM...650 will remain primary after FGVM...649 rejoins.
Why B is correct:
The study guide states:
"When FortiGate devices configured in an HA cluster lose communication with each other on the heartbeat interface, each FortiGate assumes the role of the primary device." The exhibit shows only port7 as the heartbeat device in HBDEV stats So if port7 is disconnected and heartbeat communication is lost, the cluster can enter a split-brain condition, where both units believe they are primary. The FortiOS administration guide confirms the same behavior: loss of heartbeat communication causes each member to think it is the primary Why the other options are wrong:
C is wrong because configuration synchronization status is specifically used to detect whether secondary members remain synchronized with the primary. If members are no longer synchronized, the status changes from in-sync to out-of-sync D is wrong because the study guide explains that during a configuration change, checksums may differ briefly while changes are copied, but it does not describe this as the secondary initiating a "synchronization reset" So the verified answers are: A, B.
NEW QUESTION # 77
......
Feedbacks of many IT professionals who have passed Fortinet certification NSE7_FSN_AR-7.6 exam prove that their successes benefit from RealExamFree's help. RealExamFree's targeted test practice questions and answers to gave them great help, which save their valuable time and energy, and allow them to easily and smoothly pass their first Fortinet Certification NSE7_FSN_AR-7.6 Exam. So RealExamFree a website worthy of your trust. Please select RealExamFree, you will be the next successful IT person. RealExamFree will help you achieve your dream.
New NSE7_FSN_AR-7.6 Exam Fee: https://www.realexamfree.com/NSE7_FSN_AR-7.6-real-exam-dumps.html
P.S. Free & New NSE7_FSN_AR-7.6 dumps are available on Google Drive shared by RealExamFree: https://drive.google.com/open?id=1NSj5FmI1lhMKXk_tNZTfPCkDHCZdzQ3n