The best news is that during the whole year after purchasing, you will get the latest version of our AZ-802 exam prep study materials for free, since as soon as we have compiled a new version of the AZ-802 study materials, our company will send the latest one of our AZ-802 study materials to your email immediately. Therefore, we can assure that you will miss nothing needed for the AZ-802 Exam. What's more, the latest version of our AZ-802 study materials will be a good way for you to broaden your horizons as well as improve your skills.
| Section | Objectives |
|---|---|
| Networking and high availability | - Networking infrastructure
|
| Compute, storage, and virtualization | - Storage and file services
|
| Hybrid infrastructure management | - Azure integration
|
| Secure and manage Windows Server environments | - Identity and access management
|
>> Practice Microsoft AZ-802 Exams <<
Why you should trust Pass4guide? By trusting Pass4guide, you are reducing your chances of failure. In fact, we guarantee that you will pass the AZ-802 certification exam on your very first try. If we fail to deliver this promise, we will give your money back! This promise has been enjoyed by over 90,000 takes whose trusted Pass4guide. Aside from providing you with the most reliable dumps for AZ-802, we also offer our friendly customer support staff. They will be with you every step of the way.
NEW QUESTION # 485
You have a server named DHCP1 that runs Windows Server and has the DHCP Server role installed. DHCP1 hosts an activated IPv4 scope for a subnet of 192.168.15.0/24. You have a CSV file named PrinterReservations.csv that contains the following columns: ClientId, ScopeId, IPAddress, MacAddress. All the IP addresses in PrinterReservations.csv are within the scope range and are currently available. You need to create DHCP reservations for 20 printers by using PrinterReservations.csv. The solution must minimize administrative effort. Which PowerShell command should you run?
Answer: C
Explanation:
Add-DhcpServerv4Reservation is the DHCP Server PowerShell module cmdlet that creates a single IPv4 client reservation on a specified DHCP server, and it accepts pipeline input, so importing PrinterReservations.
csv with Import-Csv and piping the resulting objects directly into Add-DhcpServerv4Reservation lets the cmdlet consume each row ' s ScopeId, IPAddress, and ClientId (MAC address) values to create all 20 reservations in a single pipelined command, which is the minimum-effort approach since it avoids writing any loop or per-row logic. Set-DhcpServerv4Reservation is used only to modify properties of a reservation that already exists, such as its description or client type, not to create new reservations, so piping CSV rows into it would fail outright since none of the reservations exist yet. Add-DhcpServerv4ExclusionRange creates an exclusion range that prevents the DHCP server from ever leasing addresses in that range to any client, which is the opposite of a reservation (which still requires the address to be leasable specifically to one identified client) and would actually break the ability to service these printers via DHCP. The fourth option ' s ForEach- Object with Add-DhcpServerv4Filter is scoped to the MAC address allow/deny filtering feature, an unrelated security control for permitting or blocking specific hardware addresses from obtaining any lease at all, not a mechanism for creating per-client static IP reservations from a CSV of address assignments.
NEW QUESTION # 486
Your network contains an Active Directory Domain Services (AD DS) domain. The domain contains servers that run Windows Server 2022.
You have a Storage Spaces Direct cluster named SSCIuster1 that contains two physical nodes named Node!
and Node2. Node! and Node2 host highly available virtual machines.
You plan to perform an in-place upgrade to Windows Server 2025 on Node1 You need to ensure that the virtual machines remain running during the upgrade.
Which four actions should you perform in sequence on Node1? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
To keep the highly available virtual machines running while a single Storage Spaces Direct node undergoes an in-place operating system upgrade, the node must first be drained of its clustered roles and its storage placed into maintenance mode using Suspend-ClusterNode with the -Drain parameter together with the storage maintenance mode setting, which together live-migrate the running virtual machines off Node1 onto Node2 and stop Node1 from participating in storage I/O for the duration of the upgrade. Only once Node1 has been fully drained of its clustered workloads and isolated from storage traffic should the in-place upgrade to Windows Server 2025 actually be performed on that node, since attempting the OS upgrade while the node is still actively hosting VMs or participating in storage I/O would risk both workload disruption and storage inconsistency. After the operating system upgrade completes successfully, the node is taken back out of storage maintenance mode so it can resume participating in the Storage Spaces Direct pool ' s I/O operations, and finally Resume-ClusterNode is run to return Node1 to active participation in the cluster so it can once again host clustered roles and receive virtual machines back through live migration. This four-step sequence, drain and enter storage maintenance mode, upgrade, exit storage maintenance mode, resume, mirrors Microsoft ' s documented procedure for safely updating an individual node in a Storage Spaces Direct cluster without workload downtime.
NEW QUESTION # 487
You need to meet the technical requirements for Cluster2.
Which four actions should you perform in sequence before you can enable replication? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
1. Create an Azure Recovery Services vault. 2. Create a Hyper-V site. 3. Install and register Azure Site Recovery Providers. 4. Create and associate replication policies.
Setting up Azure Site Recovery for a Hyper-V cluster that is not managed by Virtual Machine Manager follows a fixed infrastructure-preparation order. An Azure Recovery Services vault must exist first, since it is the container that every later step registers against. A Hyper-V site is then created in that vault to represent the on-premises Hyper-V environment, because a Hyper-V host or cluster must belong to a site before its hosts can be registered against Azure Site Recovery. The Azure Site Recovery Provider is then installed on the Hyper-V hosts (Cluster2 ' s nodes) and registered to that site/vault, which is what actually connects the cluster nodes to Azure Site Recovery. Only once the hosts are registered can a replication policy be created and associated with the Hyper-V site, since a policy has nothing to attach to until the site and its registered hosts already exist. Installing Azure Connected Machine agents is unrelated to Hyper-V VM replication -- that agent is used for onboarding servers to Azure Arc -- and is not part of this workflow. Therefore, the correct order is: create the vault, create the Hyper-V site, install and register the Providers, and create and associate the replication policy.
NEW QUESTION # 488
Your network contains a multi-site Active Directory Domain Services (AD DS) forest. Each Active Directory site is connected by using manually configured site links and automatically generated connections. You need to minimize the convergence time for changes to Active Directory. What should you do?
Answer: A
Explanation:
By default, replication between sites waits for a scheduled interval and does not immediately notify partner domain controllers when a change occurs, which is the main source of intersite convergence delay; intra-site replication, by contrast, uses change notification and typically converges within seconds. The site link ' s options attribute contains a bit flag that controls whether intersite change notification is enabled for that link; turning it on causes a source domain controller to notify its intersite replication partners of a change almost immediately, similar to intra-site behavior, rather than waiting for the next scheduled replication cycle, which directly minimizes convergence time. Modifying site link costs changes which path the Knowledge Consistency Checker prefers when multiple routes exist, affecting topology efficiency but not how quickly a given link propagates a change once it ' s used. Modifying the replication schedule adjusts the windows during which replication over a link is permitted to occur at all, and while a more frequent schedule can reduce worst-case latency somewhat, it does not eliminate the fundamental polling-interval delay the way change notification does. A site link bridge only affects whether transitivity is assumed between site links for cost calculation and has no bearing on notification behavior. Enabling change notification via the options attribute is therefore the correct answer.
NEW QUESTION # 489
You have a server named Server1 that runs Windows Server.
For Server1, you enable the default App Control for Business policies in audit mode.
You need to ensure that specific third-party applications installed on Server1 are allowed to run by using App Control for Business.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
On Windows Server, App Control for Business policies are now managed through OSConfig: you build the rule set for the specific third-party applications with New-CIPolicy and New-CIPolicyRule, use the App Control Policy Wizard to assemble and export those rules into a supplemental policy XML file, finish preparing that file for deployment by setting its version and policy identifier with Set-CIPolicyVersion and Set-CIPolicyIdInfo (including marking it as a supplement to the running audit-mode base policy), and finally push it into effect with Set-OSConfigDesiredConfiguration -Scenario AppControl. This lets the previously audited third-party applications run under the enforced policy without having to author an entirely new base policy, and generating an EVTX file from Event Viewer or running Enable-OSConfigDriftControl are unrelated actions that play no part in authoring or deploying this supplemental allow policy. Building the rules from New-CIPolicyRule can itself be driven from the audit-mode EVTX data to capture exactly the executables the third-party applications actually use, but that consumption of the audit log happens inside the New-CIPolicy/New-CIPolicyRule step rather than as a separate action in this four-step sequence.
NEW QUESTION # 490
......
Pass4guide AZ-802 exam dumps have been developed with a conscious effort to abridge information into fewer questions and answers that any candidate can learn easily. Now you don't need to go through the hassle of studying lengthy manuals for AZ-802 Exam Questions preparation. What you actually required is packed into easy to grasp content. Fix your attention on these AZ-802 questions and answers and your success is guaranteed.
Pass4sure AZ-802 Exam Prep: https://www.pass4guide.com/AZ-802-exam-guide-torrent.html