300-420 Online Prüfung, 300-420 Zertifizierungsantworten

Übrigens, Sie können die vollständige Version der ZertFragen 300-420 Prüfungsfragen aus dem Cloud-Speicher herunterladen: https://drive.google.com/open?id=1ixc10MtskkfbiR6RumiOf_gZvRKyr7TE

Man sollte die verlässliche Firma auswählen, wenn man etwas kaufen will. Was wir ZertFragen Ihnen garantieren können sind: zuerst, die höchste Bestehensquote der Cisco 300-420 Prüfung, die Probe mit kostenfreier Demo der Cisco 300-420 sowie der einjährige kostenlose Aktualisierungsdienst. Um mehr Ihre Sorgen zu entschlagen, garantieren wir noch, falls Sie die Cisco 300-420 Prüfung leider nicht bestehen, geben wir Ihnen alle Ihre bezahlte Gebühren zurück. ZertFragen----Ihr bester Partner bei Ihrer Vorbereitung der Cisco 300-420!

Cisco 300-420 Exam Syllabus Topics:

SectionWeightObjectives
Services10%- Design network management
- Design end-to-end QoS policy
WAN for Enterprise Networks20%- Design SD-WAN solution
- Design WAN connectivity
- Design QoS for WAN
Advanced Enterprise Campus Networks25%- Design for high availability
- Design Layer 2 and Layer 3 campus networks
- Design campus network services (QoS, multicast, etc.)
Enterprise Campus Security20%- Design network access control
- Design network security
Advanced Addressing and Routing Solutions25%- Create stable, secure, and scalable routing designs for Layer 3
- Determine IPv6 migration strategy
- Create structured addressing designs

>> 300-420 Online Prüfung <<

300-420 Torrent Anleitung - 300-420 Studienführer & 300-420 wirkliche Prüfung

Jeder hat eine Utopie in seinem Herzen. Manchmal macht dieser unzuerfüllende Traum uns traurig. In der Wirklichkeit ist es doch nicht zu erfüllen. Solange Sie geeignete Maßnahmen treffen, ist alles möglich. Sie können doch die Cisco 300-420 Zertifizierungsprüfung bestehen. Warum? Weil Sie die Fragenkataloge von ZertFragen haben. Die Fragenpool zur Cisco 300-420 Prüfung von ZertFragen sind die besten Fragenpool. Sie sind wegen ihrer hohen Erfolgsquote und Effizienz ganz berühmt. Zugleich können Sie auch viel Kraft ersparen. Mit ZertFragen können Sie die Prüfung ganz einfach bestehen und Ihren Traum verwirklichen. Sie werden mehr Selbstbewusstsein haben, was zum Erfolg führt.

Cisco Designing Cisco Enterprise Networks 300-420 Prüfungsfragen mit Lösungen (Q455-Q460):

455. Frage
What is the purpose of a Cisco SD-Access underlay network?

Antwort: B

Begründung:
The Cisco SD-Access underlay provides the physical and IP transport foundation that allows fabric nodes to reach each other. In plain terms, it is the routed connectivity built from the switches, routers, links, and loopback reachability that the overlay depends on. Cisco SD-Access then uses the overlay to provide virtualization, segmentation, policy, and endpoint mobility on top of that transport. This is why the underlay is best described as establishing the connectivity between the switches and routers that form the fabric. Option A describes the abstraction performed by the overlay, not the underlay. Option B is closer to a Layer 2 tunneling description and is not the main purpose of the SD-Access underlay. Option D describes encapsulated overlay behavior, especially VXLAN-based data-plane transport, not the physical/routed foundation itself. A good SD- Access design validates underlay reachability, routing adjacencies, MTU, loopback advertisement, and redundancy before onboarding the overlay services. Without a stable underlay, LISP control-plane mappings and VXLAN data-plane forwarding cannot operate predictably. Reference topics: SD-Access underlay, routed campus foundation, fabric node reachability, overlay dependency.


456. Frage

Refer to the exhibit. A customer experienced an unexpected network outage when the link between R1 and R2 went down. An architect must design a solution to ensure network continuity in the event the link fails again.
Which solution should the design include?

Antwort: A


457. Frage
Which queuing structure is used on SD-WAN Edge routers?

Antwort: A

Begründung:
Cisco SD-WAN edge routers use a queuing model based on LLQ and WFQ concepts. Low Latency Queuing provides strict priority treatment for delay-sensitive traffic such as voice and real-time media, while Weighted Fair Queuing gives proportional service to other traffic classes based on bandwidth allocation. This combination aligns with SD-WAN requirements where business-critical and real-time traffic must be protected without starving normal data applications. FIFO is not appropriate for a multi-class WAN design because it does not distinguish application priority during congestion. A pure priority queue would risk starving lower-priority traffic if it were not controlled by policing or bandwidth limits. Hardware-specific campus queuing models such as 1P-4Q-2T describe certain switch egress queue structures, not the generic SD- WAN edge queuing architecture. In a professional SD-WAN QoS design, traffic is classified, marked, mapped to forwarding classes, and then scheduled using priority and weighted queues according to business intent. Reference topics: Cisco SD-WAN QoS, LLQ, WFQ, forwarding classes, application-aware WAN policy.


458. Frage
Which feature provides the capability for intra-VN traffic filtering and control within the Cisco SD- Access architecture?

Antwort: C


459. Frage

Refer to the exhibit. An engineer is designing an OSPF network for a client. Requirements dictate that the routers in Area 1 should receive all routes belonging to the network, including EIGRP, except the ones originated in the RIP domain. Which action should the engineer take?

Antwort: C

Begründung:
Area 1 should be configured as an NSSA when the design must allow selected external routes, such as EIGRP- originated routes, while controlling other external routes such as those from the RIP domain. A normal OSPF area receives Type 5 external LSAs, so it would not inherently block the unwanted RIP-originated external routes. A stub area blocks Type 5 external LSAs, but it also cannot contain an ASBR that injects external routes in the normal way. An NSSA is designed for this exact middle ground: it restricts external LSAs from the backbone while allowing external routes to be injected inside the area as Type 7 LSAs, which are translated by the ABR when needed. This allows Area 1 to receive the necessary internal and selected redistributed information while excluding external routes originated elsewhere. Making the routers part of area 0 would not solve the external-route filtering requirement and would weaken the intended area structure.
Therefore, NSSA provides the required balance of route visibility and external-route control. Reference topics: OSPF NSSA, Type 5 LSAs, Type 7 LSAs, external route control, area design.


460. Frage
......

Unser ZertFragen ist eine Website, die eine lange Geschichte hinter sich hat. So genießt ZertFragen einen guten Ruf in der IT-Branche. Und wir haben vielen Kandidaten geholfen, die Cisco 300-420 Prüfung zu bestehen. Die Fragen und Antworten zur Cisco 300-420 Zertifizierungsprüfung von ZertFragen werden von den erfahrungsreichen Expertenteams nach ihren Kenntnissen und Erfahrungen bearbeitet. Wenn Sie an der Cisco 300-420 Zertifizierungsprüfung teilnehmen wollen, ist ZertFragen zweifellos eine gute Wahl.

300-420 Zertifizierungsantworten: https://www.zertfragen.com/300-420_prufung.html

Laden Sie die neuesten ZertFragen 300-420 PDF-Versionen von Prüfungsfragen kostenlos von Google Drive herunter: https://drive.google.com/open?id=1ixc10MtskkfbiR6RumiOf_gZvRKyr7TE