For starters and professionals Versa Certified SD-WAN Specialist (VNX300) play a significant role to verify skills, experience, and knowledge in a specific technology. Enrollment in the Versa Certified SD-WAN Specialist (VNX300) VNX301 is open to everyone. Upon completion of Versa Certified SD-WAN Specialist (VNX300) VNX301 Exam Questions' particular criteria. Participants in the VNX301 Questions come from all over the world and receive the credentials for the Versa Certified SD-WAN Specialist (VNX300) VNX301 Questions. They can quickly advance their careers in the fiercely competitive market and benefit from certification after earning the VNX301 Questions badge. However, passing the Versa Certified SD-WAN Specialist (VNX300) VNX301 is the primary concern.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
Versa Networks VNX301 certification exam is a very difficult test. Even if the exam is very hard, many people still choose to sign up for the exam. As to the cause, VNX301 exam is a very important test. For IT staff, not having got the certificate has a bad effect on their job. Versa Networks VNX301 certificate will bring you many good helps and also help you get promoted. In a word, this is a test that will bring great influence on your career. Such important exam, you also want to attend the exam.
NEW QUESTION # 33
A CGNAT rule is configured, but traffic is not being translated. You want to confirm whether the expected source and destination prefixes are programmed in the CGNAT access list for the tenant. Which command is most appropriate?
Answer: C
Explanation:
The correct answer is A . Versa CGNAT troubleshooting documentation states that, after connecting to the vsmd daemon, administrators can view CGNAT access lists used for traffic matching with the command show cgnat acl info < tenant-id > . The sample output shows ACL handle, rule ID, category, precedence, VRF, source IP, destination IP, tenant ID, and total filters.
This is the correct command when NAT configuration appears present but translations do not occur, because it verifies whether the runtime dataplane has the correct traffic-match rules. If the source prefix, destination prefix, VRF, or precedence is wrong, the session may never match the NAT rule, and no translation will be applied.
show system status checks system services. show device clients shows active and failed sessions, CPU usage per session, and memory load for processes. show system storage shows disk usage. These commands are useful in other troubleshooting workflows, but they do not validate CGNAT ACL matching criteria for tenant traffic.
NEW QUESTION # 34
An SD-WAN branch is deployed behind a NAT device. In the VSM local-tunnel-site output, which field or flag indicates that a WAN link is behind NAT?
Answer: A
Explanation:
The correct answer is A . Versa SD-WAN data-path troubleshooting documentation shows the VSM local- tunnel-site output and includes a legend in which BN means Behind NAT . In the WAN local link details, the output also displays a field named WAN lcl link behind NAT , with values such as 1 or 0, and link flags including [ BN CT PT SLA-P ] when the WAN link is behind NAT.
This information is important because NAT status affects how SD-WAN tunnel endpoints are discovered and how public and private transport addresses are represented. The same output includes both public and private WAN link addresses, making it useful for troubleshooting sites behind NAT, stale tunnel endpoints, or incorrect public-address learning.
WAN lcl vrf-id identifies the local transport routing instance ID, not NAT status. Tenant ID identifies the tenant context. Neighbour site type identifies whether the remote endpoint is a Controller, hub, or SD-WAN site. None of those fields specifically confirms whether the local WAN transport is behind NAT.
NEW QUESTION # 35
Examine the exhibit below.
Spoke1 and Spoke2 are part of Spoke-to-Hub-Only spoke group, the hub is advertising a default route to both the spokes.
Referring to the exhibit, which statement is true?
Answer: A
Explanation:
In Versa SD-WAN, a Spoke-to-Hub-Only topology is specifically designed for deployments where spoke branches communicate only with hub resources and not with other spokes. Versa's SD-WAN design documentation states that in a spoke-to-hub-only topology, the default behavior is that only hub routes are advertised, and spoke routes are not re-advertised by the hub branch. It also explains that this topology is used when spokes do not have to communicate with each other.
Even though the hub in the exhibit advertises a default route, that does not change the topology behavior into spoke-to-spoke communication. The default route can attract unknown traffic from the spokes toward the hub, but the Spoke-to-Hub-Only policy prevents the spoke prefixes from being redistributed or imported in a way that allows spoke-to-spoke reachability. Versa documentation further shows that spoke routes are filtered using BGP communities and import policies, and that the spoke route table contains only destinations behind the hubs, not other spoke routes.
NEW QUESTION # 36
Which two methods would be used to upgrade deployed VOS branch devices? (Choose two.)
Answer: A,C
Explanation:
The correct answers are A and C . Versa supports upgrading deployed VOS branch devices either directly on the VOS appliance or centrally through Versa Director. The Director-based method is performed from the Administration > Appliances area: Versa documentation says to select one or more Controller nodes or VOS devices, click the Upgrade Selected Appliances icon, choose the software image package, and proceed with the appliance upgrade. The same upgrade procedure is referenced for remaining VOS branch devices, including the option to upgrade branches individually or all at once.
A CLI-based upgrade using a software .bin package is also a valid operational method when the image is copied to the device and installed locally, particularly for controlled or recovery-style maintenance.
Option B is not the best answer for already deployed branch upgrades because the Preferred Software Version field applies to zero-touch provisioning; Versa states that during ZTP, Director upgrades a branch to the preferred version if applicable. That setting influences onboarding behavior, not the normal upgrade workflow for already deployed branches. Option D is incorrect because System > Director Upgrade is used to upgrade the Versa Director node itself, not VOS branch appliances.
NEW QUESTION # 37
You configured Direct Internet Access on your Versa branches using the workflow template. Which statement is true in this scenario?
Answer: A
Explanation:
The correct answer is C . In Versa Secure SD-WAN, Direct Internet Access, or DIA, provides local internet breakout from the branch rather than backhauling internet-bound traffic through a hub. Versa design documentation explains that the DIA architecture creates an internal connection between the tenant VRF and the WAN transport VR and uses CGNAT to translate internet-bound LAN traffic to the public IP address associated with the WAN transport interface. It specifically states that the main DIA components include the CGNAT function for translating internet-bound traffic and that DIA is configured using Director Workflows when configuring tunnels.
When the workflow template is used and the DIA option is selected for the internet breakout tunnel, Director automatically builds the required DIA infrastructure, including the NAPT/CGNAT configuration associated with the internet-facing transport network. This is why manual creation of the CGNAT pool and rule is not required in the workflow-based method. Option A describes a manual configuration approach, not the workflow-generated behavior. Option B is incorrect because NAT must be associated with the internet-facing breakout path, not simply the LAN interface. Option D is incorrect because DIA normally requires address translation for LAN users accessing the public internet.
NEW QUESTION # 38
......
You may be also one of them, you may still struggling to find a high quality and high pass rate Versa Certified SD-WAN Specialist (VNX300) study question to prepare for your exam. Your search will end here, because our study materials must meet your requirements. Our product is elaborately composed with major questions and answers. Our study materials are choosing the key from past materials to finish our VNX301 Torrent prep. It only takes you 20 hours to 30 hours to do the practice. After your effective practice, you can master the examination point from the VNX301 exam torrent. Then, you will have enough confidence to pass it. So start with our VNX301 torrent prep from now on. We can succeed so long as we make efforts for one thing.
Free VNX301 Dumps: https://www.troytecdumps.com/VNX301-troytec-exam-dumps.html