P.S. Free 2026 Network Appliance NS0-185 dumps are available on Google Drive shared by PrepAwayTest: https://drive.google.com/open?id=1O7ZgXgGeE9WniVaB2vGG5g14u9fYoNKj
Our NS0-185 practice questions and answers are created according to the requirement of the certification center and the latest exam information. Our NS0-185 real dumps cover the comprehensive knowledge points and latest practice materials that enough to help you Clear NS0-185 Exam tests. You will get our valid NS0-185 dumps torrent and instantly download the exam pdf after payment.
| Section | Weight | Objectives |
|---|---|---|
| Configuration and Administration | 30-35% | - Network Configuration
|
| Security and High Availability | 15-20% | - High Availability Setup
|
| Installation and Initialization | 20-25% | - Pre-installation Planning
|
| Upgrade, Migration and Troubleshooting | 20-25% | - Troubleshooting
|
>> Network Appliance NS0-185 Boot Camp <<
If you have purchased our NS0-185 exam braindumps, you are advised to pay attention to your emails. Our system will automatically send you the updated version of the NS0-185 preparation quiz via email. If you do not receive our email, you can directly send an email to ask us for the new version of the NS0-185 Study Materials. We will soon solve your problems at the first time. And according to our service, you can enjoy free updates for one year.
NEW QUESTION # 40
You have a 4-node ONTAP 9.8 cluster with a FAS8700 HA pair that serves iSCSI LUNs. You are adding a new AFF A250 HA pair to the cluster with new iSCSI SAN LIFs. You need to allow non-optimized data paths from the AFF A250 nodes to the existing LUNs on the FAS8700 nodes.
In this scenario, which two ONTAP configuration settings must you verify? (Choose two.)
Answer: B,C
Explanation:
This scenario is about iSCSI SAN path visibility after cluster expansion. ONTAP usesSelective LUN Map (SLM)concepts so that hosts do not automatically see every LUN through every node, which would create unnecessary paths. ONTAP documentation explains that with SLM, when a LUN map is created, the LUN is accessible through paths on the node that owns the LUN and its HA partner, and this behavior is controlled through thereporting-nodeslist.
If you wantadditional paths(including non-optimized paths) from newly added nodes, you must ensure the new nodes can be included in the reporting scope for those LUN mappings. ONTAP provides an explicit mechanism for this: the lun mapping add-reporting-nodes command is used before or after data mobility events to add nodes to the reporting-nodes list for a LUN mapping. This directly matches optionC (reporting nodes).
However, even if reporting-nodes is expanded, hosts only gain usable iSCSI access if the target LIFs are reachable/allowed. ONTAP documentation describes thatportsetscan be used with SLM to further restrict access, and when using SLM with portsets, LUNs are accessible on the set of LIFs included in the portset (on the owning node and its HA partner). Therefore, to "allow non-optimized paths from the AFF A250 nodes," you must verify whether portsets are being used and that the appropriate new iSCSI LIFs are included (or that no restrictive portset blocks them). That makes optionA (port sets)the second correct configuration item.
Option B (switch zoning) applies to FC fabrics, not iSCSI. Option D (failover groups) affects NAS
/management LIF failover behavior and does not control SAN LUN reporting visibility in the way SLM
/reporting-nodes and portsets do.
NEW QUESTION # 41
Exhibit.
You are installing a FAS2254 and a DS2246 disk shelf at a customer's site. The controller and disk shelf must be racked in separate rows in the data center due to available space.
The customer wants you to use two of the 20-meter copper SAS cables to make connections. Referring to the exhibit, which statement is correct?
Answer: C
Explanation:
This question tests installation cabling constraints and supported cabling media for SAS connectivity. The key issue is distance: the customer wants to use20-meter copper SAS cablesbetween a controller and a shelf that are installed in separate rows.
NetApp hardware cabling guidance indicates that when long distance SAS connectivity is required, the supported approach is to useSAS optical cabling(for applicable platforms and shelf/IOM combinations). The ONTAP hardware systems documentation describes "mini-SAS HD SAS optical cable rules," noting that optical AOC SAS cables are available in lengths up to50 metersfor controller-to-stack and shelf-to-shelf connections in supported configurations. This highlights a critical installation principle: long SAS runs are addressed withoptical, not copper.
The documentation also establishes that SAS cabling within a stack must be consistent (all copper or all optical) and that mixed approaches have specific constraints. While the excerpt emphasizes optical rules (because optical is the mechanism for long distance), it implicitly reinforces that copper has practical distance limitations and is not the long-distance solution.
Therefore, if the customer insists on copper SAS, the correct guidance is thatthe controller and disk shelf must be closer togetherto remain within supported copper SAS distance limits and to ensure signal integrity and supported operation. Option B is incorrect because simply "obtaining" 20-meter copper SAS cables does not make the configuration supported. Option D is incorrect because Ethernet adapters do not replace SAS for shelf connectivity. Option A is nonsensical in this context because SAS shelf connectivity cannot be replaced by a "wireless adapter" as a supported installation practice.
Thus, the correct answer isC: if copper cables are to be used, the devices must be closer together; otherwise the supported solution is to use a supported SAS optical approach.
NEW QUESTION # 42
You were dispatched to install a cluster made up of FAS8060 and FAS8080 controllers. There are three FAS8060 controllers and three FAS8080 controllers.
Which solution would provide the largest possible cluster?
Answer: B
Explanation:
As part of the ONTAP SAN solution assessment domain, NetApp defines strict rules governingcluster composition and scalability. ONTAP clusters support a maximum of24 nodes, and within that limit, clusters can includedifferent controller models, provided they are supported by the same ONTAP release and meet hardware compatibility requirements.
BothFAS8060andFAS8080controllers are supported within ONTAP clusters and can coexist in a single cluster configuration. NetApp installation documentation explicitly allows mixed-controller clusters as long as the controllers are compatible and running the same ONTAP version.
In this scenario, there are six total controllers available: three FAS8060 and three FAS8080. Since ONTAP supports heterogeneous clusters and there is no architectural limitation preventing all six controllers from participating, thelargest possible clusteris achieved by includingall six nodes.
Smaller cluster sizes-two, four, or five nodes-are technically valid but do not meet the requirement of providing thelargest possible cluster. The assessment objective focuses on maximizing usable resources while staying within supported configuration guidelines.
Additionally, ONTAP automatically manages performance balancing and high availability across mixed- controller clusters. Each node pair forms an HA pair, and ONTAP ensures consistent data access across the entire cluster fabric.
Therefore, the correct answer isD, a cluster made up of six nodes.
NEW QUESTION # 43
Which two switch operating system are supported on ONTAP cluster switches? (Choose two.)
Answer: C,D
Explanation:
https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Systems/Fabric_Interconnect
_and_Management_Switches/NetApp_Cluster_Switches_Compatibility_Matrix
NEW QUESTION # 44
You are working with a customer on a new data center installation. You need to calculate the noise levels, power draw, and heat that the NetApp systems in this data center will produce. In this scenario, which two tools would satisfy these requirements? (Choose two.)
Answer: B,C
Explanation:
https://kb.netapp.com/on-prem/ontap/DM/Efficiency/Efficiency-
KBs/How_to_check_AFF_storage_efficiency_with_the_NetApp_PowerShell_Toolkit
NEW QUESTION # 45
......
Overall we can say that NetApp Storage Installation Engineer, ONTAP Professional Exam; NS0-185 certification can provide you with several benefits that can assist you to advance your career and achieve your professional goals. Are you ready to gain all these personal and professional benefits? Looking for a sample, is smart and quick for Network Appliance NS0-185 Exam Dumps preparation? If your answer is yes then you do not need to go anywhere, just download PrepAwayTest NS0-185 Questions and start Network Appliance NS0-185 exam preparation with complete peace of mind and satisfaction.
NS0-185 Valid Exam Preparation: https://www.prepawaytest.com/NetworkAppliance/NS0-185-practice-exam-dumps.html
DOWNLOAD the newest PrepAwayTest NS0-185 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1O7ZgXgGeE9WniVaB2vGG5g14u9fYoNKj