If you choose our study materials and use our products well, we can promise that you can pass the exam and get the VNX301 certification. Then you will find you have so many chances to advance in stages to a great level of social influence and success. Our VNX301 Dumps Torrent can also provide all candidates with our free demo, in order to exclude your concerts that you can check our products. We believe that you will be fond of our products.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
>> Pass4sure VNX301 Dumps Pdf <<
If you are still unsure whether to pursue Versa Networks VNX301 exam questions for Versa Networks Versa Certified SD-WAN Specialist (VNX300) exam preparation, you are losing the game at the first stage in a fiercely competitive marketplace. Versa Networks VNX301 Questions are the best option for becoming Versa Networks Versa Certified SD-WAN Specialist (VNX300).
NEW QUESTION # 27
A customer has purchased 10 Versa SD-WAN licenses. In this scenario, which statement is correct?
Answer: A
Explanation:
The correct answer is C . In Versa Secure SD-WAN, licensing and device management are centralized through Versa Director , not directly through the Controller. During zero-touch provisioning and staging, the branch device is brought under centralized management, and Director pushes the required staging and operational configuration. Versa staging documentation explains that during Stage 2 and Stage 3, Versa Director pushes configuration to the branch device, and after Stage 3 the branch becomes fully operational as part of the customer SD-WAN network.
Versa monitoring documentation also shows that the Director node provides license visibility, specifically stating that the Director monitoring view includes a License pane that displays information about the licenses installed on the VOS devices managed by the Director node. This confirms that license administration is handled from Director, not from the Controller. The Controller is responsible for SD-WAN control-plane functions and tunnel connectivity, but it is not the primary system for managing customer license subscriptions.
Option A is incomplete because the practical operational model is not simply receiving individual soft licenses. Option B incorrectly implies licenses are preloaded on physical CPEs as the key licensing method. Option D is incorrect because ZTP management and license subscription handling are not performed by the Controller.
NEW QUESTION # 28
A Director administrator opens the Monitor tab for a provider organization and wants to see the number of tenants, SD-WAN branches, Controllers, hubs, Director nodes, and Analytics nodes. Which pane provides this information?
Answer: D
Explanation:
The correct answer is A . Versa monitoring documentation states that when an administrator selects a provider organization in Director and opens the Summary tab, the screen displays several panes. The Asset Inventory pane displays the number of tenants, SD-WAN branches, SD-WAN Controller nodes, vCPEs, SD-WAN hubs, uCPEs, Director nodes, and Analytics nodes in the organization.
This pane is useful for quickly validating the managed estate and confirming whether expected infrastructure objects exist under the provider organization. It also provides a Details button to display asset information in tabular format, which can help during audits or operational checks.
Package Information shows software package details for the selected node, not organization-wide inventory. Uptime shows how long a node and its software have been running. High Availability shows Director HA information. These panes are useful, but they do not provide the organization-level asset count requested in the question.
NEW QUESTION # 29
Examine the exhibit below.
Spoke1 and Spoke2 are part of Spoke-to-Hub-Only spoke group, the hub is advertising a default route to both the spokes.
Referring to the exhibit, which statement is true?
Answer: B
Explanation:
In Versa SD-WAN, a Spoke-to-Hub-Only topology is specifically designed for deployments where spoke branches communicate only with hub resources and not with other spokes. Versa's SD-WAN design documentation states that in a spoke-to-hub-only topology, the default behavior is that only hub routes are advertised, and spoke routes are not re-advertised by the hub branch. It also explains that this topology is used when spokes do not have to communicate with each other.
Even though the hub in the exhibit advertises a default route, that does not change the topology behavior into spoke-to-spoke communication. The default route can attract unknown traffic from the spokes toward the hub, but the Spoke-to-Hub-Only policy prevents the spoke prefixes from being redistributed or imported in a way that allows spoke-to-spoke reachability. Versa documentation further shows that spoke routes are filtered using BGP communities and import policies, and that the spoke route table contains only destinations behind the hubs, not other spoke routes.
NEW QUESTION # 30
In an HA active-active deployment, one device has two WAN networks, INET-1 and MPLS-1 , and its peer also has two WAN networks, INET-2 and MPLS-2 . In this scenario, how many subinterfaces will be created on the cross-connect link between the devices by an HA active-active workflow?
Answer: A
Explanation:
The correct answer is D . In a Versa HA active-active branch deployment, the cross-connect link between the two CPE devices is used to extend WAN transport reachability between the peers. Versa SD-WAN design documentation explains that, in an HA active-active design, a cross-connect cable between the two devices extends one device's transport VR to the other device and vice versa. For example, the documentation describes the cross-connect as extending the MPLS-Transport-VR to one device and the Internet- Transport-VR to the peer device.
In the question, there are four total WAN networks across the HA pair: INET-1 , MPLS-1 , INET-2 , and MPLS-2 . The HA active-active workflow must create separate logical subinterfaces on the cross-connect link for each WAN network so that each transport segment can be extended and kept logically separated across the two appliances. Therefore, the number of subinterfaces created on the cross-connect link equals the total number of WAN networks across the HA pair, which is four .
Options A, B, and C are incorrect because they undercount the number of required transport extensions. Two subinterfaces would only account for two WAN networks, but this design has four separate WAN transport networks.
NEW QUESTION # 31
Examine the exhibit below.
An SD-WAN administrator has configured Direct Internet Access (DIA) for INET and INET-2 and wants to use SaaS Application Monitoring and SD-WAN policies to steer certain applications to the best Internet path on a certain VOS device.
Which two statements are true regarding the configuration shown in the exhibit? (Choose two.)
Answer: B,D
Explanation:
The correct answers are B and D . In the exhibit, the Next-Hop Selection Method is configured as Load Balance , and both INET and INET-2 have the same next-hop priority value of 1 . Versa SD-WAN guidance states that load balancing between WAN paths is achieved by configuring at least two circuits with equal priority. Therefore, when both INET and INET-2 satisfy the SLA requirements, sessions can be load-balanced across those two internet circuits.
Option D is also correct because the exhibit shows SLA Violation Action: Forward . This means that if no next hop is SLA-compliant, the VOS device is still allowed to forward traffic instead of dropping it. This behavior is consistent with Versa SD-WAN traffic-steering concepts, where forwarding profiles define circuit or path priorities, connection methods, load-balancing behavior, and SLA handling for traffic that matches an SD-WAN policy.
Option A is incorrect because the exhibit does not use the Automatic next-hop selection method. Versa' s performance-based SaaS optimization uses monitoring metrics to select the best path when configured for automatic/performance-based selection, but this exhibit shows Load Balance instead. Option C is not the best answer because LTE has lower priority 2 and would be considered only after the higher- priority INET and INET-2 paths are unavailable or unusable, not merely when one INET circuit fails.
NEW QUESTION # 32
......
You may be upset about the too many questions in your VNX301 test preview. Now, you will clear your worries. Our VNX301 test engine can allow unlimited practice your exam. With the options to highlight the missed questions, you can know your mistakes in your VNX301 test training, then, you can practice with purpose. If you want to have 100% confidence, you can practice until you get right. Besides, you can do marks where possible, so as to review and remember next time.Through effort and practice, you can get high scores in your Versa Networks VNX301 real test.
Reliable VNX301 Test Objectives: https://www.practicevce.com/Versa-Networks/VNX301-practice-exam-dumps.html