P.S. Free & New H35-580_V2.0 dumps are available on Google Drive shared by TestPDF: https://drive.google.com/open?id=109qGZxoVZyXZX5WSr1FWDscGcrIRnYh5
TestPDF offers Huawei H35-580_V2.0 practice tests for the evaluation of HCIA-5G-RNP&RNO V2.0 exam preparation. Huawei H35-580_V2.0 practice test is compatible with all operating systems, including iOS, Mac, and Windows. Because this is a browser-based H35-580_V2.0 Practice Test, there is no need for installation.
| Section | Weight | Objectives |
|---|---|---|
| 5G Base Station Overview and Basic Operations | 10% | - 5G Base Station Products and Hardware Composition - 5G Base Station Maintenance and Fault Handling - 5G Base Station Configuration and Commissioning - 5G Base Station Installation and Deployment |
| Basic Features of 5G Wireless Networks | 20% | - 5G QoS and Slicing - Flexible Duplex and Spectrum Sharing - Massive MIMO Technology - Beam Management and Optimization |
| Fundamentals of 5G Network Optimization | 30% | - Performance Monitoring and Evaluation Indicators - Mobility Optimization - Capacity and Throughput Optimization - Coverage Optimization - Network Optimization Process and Methods - Interference Optimization |
| 5G Wireless Network Principles | 20% | - 5G NR Channels and Signals - 5G NR Overview and Key Technologies - 5G NR Frame Structure and Physical Resources - 5G NR Mobility and Power Control |
| Fundamentals of 5G Network Planning | 20% | - Parameter Planning and Configuration - Wireless Environment Analysis and Coverage Planning - Site Survey and Design - 5G Network Planning Process and Principles - Capacity and Interference Planning |
>> H35-580_V2.0 Valid Examcollection <<
Our passing rate is 98%-100% and there is little possibility for you to fail in the exam. But if you are unfortunately to fail in the exam we will refund you in full immediately. Some people worry that if they buy our H35-580_V2.0 exam questions they may fail in the exam and the procedure of the refund is complicated. But we guarantee to you if you fail in we will refund you in full immediately and the process is simple. If only you provide us the screenshot or the scanning copy of the H35-580_V2.0 failure marks we will refund you immediately. If you have doubts or other questions please contact us by emails or contact the online customer service and we will reply you and solve your problem as quickly as we can. So feel relieved when you buy our H35-580_V2.0 guide torrent.
NEW QUESTION # 42
How many RBs are included when a bandwidth of 100 MHz and a subcarrier spacing of 60 kHz are used in a
5G cell?
Answer: D
Explanation:
Explanation
To find the number of RBs in a 5G cell, we need to know the bandwidth and the subcarrier spacing of the cell.
The bandwidth is the total frequency range allocated for the cell, while the subcarrier spacing is the frequency separation between adjacent subcarriers in the cell. A RB is a group of 12 consecutive subcarriers in the frequency domain 12. Therefore, the number of RBs in a 5G cell can be calculated by dividing the bandwidth by the product of the subcarrier spacing and 12.
Given that the bandwidth is 100 MHz and the subcarrier spacing is 60 kHz, we can use the following formula to find the number of RBs:
Number of RBs = Bandwidth / (Subcarrier spacing * 12) Number of RBs = 100 MHz / (60 kHz * 12) Number of RBs = 100000 kHz / 720 kHz Number of RBs = 138.888...
However, since the number of RBs must be an integer, we need to round it down to the nearest multiple of
3 3. This is because the NR standard defines different frequency ranges for different subcarrier spacings, and each frequency range has a minimum and maximum number of RBs that are multiples of 3 4. For example, for subcarrier spacing of 60 kHz, the frequency range is from 24250.08 MHz to 52600.08 MHz, and the minimum and maximum number of RBs are 66 and 273, respectively.
Therefore, the closest multiple of 3 to 138.888... is 135. However, this number is not valid because it is lower than the minimum number of RBs for subcarrier spacing of 60 kHz. The next valid multiple of 3 is 273, which is also the maximum number of RBs for subcarrier spacing of 60 kHz. Therefore, the correct answer is C. 273.
NEW QUESTION # 43
Which piece of information will not be referenced by the automatic deletion of neighbor relations feature?
Answer: A
Explanation:
Automatic Neighbor Relation (ANR) deletion mainly considers neighbor cell definitions, usage statistics, and neighbor cell configurations. X2/XN interface configurations are not typically used as criteria for automatic neighbor deletion.
NEW QUESTION # 44
Which of the following statements about the space principles for 5G BBU installation are correct?(Select All that Apply)
Answer: A,B,D
Explanation:
Explanation
According to the Hardware Description: Bbu5900 V100r013c10, these statements are correct about the space principles for 5G BBU installation:
If the installation space is insufficient, the BBU can be installed on a wall. Ensure that the wall meets the load bearing requirements: The BBU can be installed on a wall using wall-mounted brackets. The wall must be able to bear at least four times the weight of the BBU and must be flat and vertical. The installation height of the BBU must not exceed 2 m.
If the space is greater than 600 mm, a cabinet can be added to install the BBU: The BBU can be installed in a cabinet that meets the requirements of Huawei base stations. The cabinet must have a width of 19 inches and a depth of at least 600 mm. The cabinet must also provide sufficient ventilation, grounding, and lightning protection for the BBU.
If the remaining space of an existing cabinet is greater than 4 U, the BBU can be installed directly: The BBU can be installed in an existing cabinet that has enough space for it. The BBU has a height of 2 U, so it requires at least 4 U of space in a cabinet. The existing cabinet must also meet the requirements of Huawei base stations.
The other statement is incorrect about the space principles for 5G BBU installation:
If the installation space is insufficient, install 5G boards directly into the existing 4G B8U: This statement is not supported by Huawei base stations. The 5G boards cannot be installed directly into the existing 4G B8U because they have different slot distributions and board types. The 5G boards can only be installed in a BBU5900 subrack that supports both LTE and NR modes.
NEW QUESTION # 45
Which of the following are the cause values of QoS flow setup failures?(Select All that Apply)
Answer: A,C
Explanation:
Explanation
According to the HCIA-5G V2.0 Exam Outline, no response from the UE, insufficient radio resources, and unauthorized UE are cause values of QoS flow setup failures, which correspond to options A, B, and D.
Insufficient transmission resources is not a cause value of QoS flow setup failures, but a cause value of handover execution failures, which corresponds to option C.
NEW QUESTION # 46
5G can meet service requirements in scenarios with a mobility speed of up to 500 km/h.
Answer: B
Explanation:
Explanation
According to the Huawei Career Certification Learning, 5G can meet service requirements in scenarios with a mobility speed of up to 500 km/h, which is much higher than the 4G limit of 350 km/h.
NEW QUESTION # 47
......
The H35-580_V2.0 Mock Exams not just give you a chance to self-access before you actually sit for the certification exam, but also help you get an idea of the Huawei exam structure. It is well known that students who do a mock version of an exam benefit from it immensely. Some Huawei certified experts even say that it can be a more beneficial way to prepare for the HCIA-5G-RNP&RNO V2.0 exam than spending the same amount of time studying.
Fresh H35-580_V2.0 Dumps: https://www.testpdf.com/H35-580_V2.0-exam-braindumps.html
BTW, DOWNLOAD part of TestPDF H35-580_V2.0 dumps from Cloud Storage: https://drive.google.com/open?id=109qGZxoVZyXZX5WSr1FWDscGcrIRnYh5