You can also trust TorrentExam Microsoft AZ-802 exam questions and start this journey with complete peace of mind and satisfaction. The Administering Windows Server practice questions are designed and verified by experienced and qualified Administering Windows Server (AZ-802) exam experts. They work collectively and put their expertise to ensure the top standard of TorrentExam Microsoft AZ-802 Exam Dumps. So we can say that with the TorrentExam Microsoft AZ-802 exam questions, you will get everything that you need to learn, prepare and pass the difficult Microsoft AZ-802 certification exam with good scores.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Deploy and manage Active Directory Domain Services (AD DS) in on-premises and cloud environments | 20% | - Install and configure domain controllers - Integrate AD DS with Azure AD and Azure Arc - Implement and manage Group Policy Objects - Manage FSMO roles and replication |
| Topic 2: Manage Windows Servers and workloads in a hybrid environment | 20% | - Deploy servers using Windows Admin Center and Azure Arc - Manage updates and patches across hybrid servers - Implement hybrid identity solutions - Configure remote management and secure administration |
| Topic 3: Implement high availability and disaster recovery | 5% | - Monitor and troubleshoot Windows Server environments - Use Azure Site Recovery for hybrid workloads - Implement backup and recovery solutions - Perform server and workload migrations - Configure failover clustering |
| Topic 4: Implement and manage an on-premises and hybrid networking infrastructure | 15% | - Secure network traffic in hybrid environments - Configure software-defined networking - Implement hybrid network connectivity - Configure IP addressing, DNS, and DHCP |
| Topic 5: Manage virtual machines and containers | 15% | - Configure Azure Arc-enabled servers and VMs - Deploy and manage Hyper-V virtual machines - Deploy and manage containers and Kubernetes on Windows Server |
| Topic 6: Manage storage and file services | 15% | - Configure file servers and shares - Integrate on-premises storage with Azure Storage - Implement Storage Spaces and Storage Spaces Direct - Configure data deduplication and replication |
| Topic 7: Secure Windows Server on-premises and hybrid infrastructures | 10% | - Manage access control and permissions - Implement security baselines and hardening - Configure Windows Defender and audit policies |
>> AZ-802 Most Reliable Questions <<
The price for Microsoft AZ-802 exam materials is reasonable, and no matter you are a student at school or an employee in the company, you can afford it. Besides, Administering Windows Server AZ-802 Exam Materials are compiled by skilled professionals, and they are familiar with the exam center, therefore the quality can be guaranteed.
NEW QUESTION # 289
You have a Hyper-V failover cluster named Cluster1 at a main datacenter. Cluster1 contains two nodes that have the Hyper-V server role installed. Cluster1 hosts 10 highly available virtual machines. You have a cluster named Cluster2 in a disaster recovery site. Cluster2 contains two nodes that have the Hyper-V server role installed. You plan to use Hyper-V Replica to replicate the virtual machines from Cluster1 to Cluster2.
What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Cluster role to create on Cluster2: Hyper-V Replica Broker. Replication target name to specify: The name of the Hyper-V Replica Broker.
When Hyper-V Replica is used with a clustered Hyper-V host as either the primary or the replica site, that cluster requires a Hyper-V Replica Broker role, because the broker abstracts away which specific physical node currently owns a given replicated virtual machine, keeping replication working correctly even as VMs live-migrate or fail over between nodes within the cluster. Before enabling replication, an administrator must create this Hyper-V Replica Broker role on Cluster2 and configure its replication settings, including the authentication method, the storage location for replica virtual machine files, and which primary servers are allowed to replicate to it. When subsequently configuring replication for the virtual machines on Cluster1, the destination (replica server) must be specified using the Hyper-V Replica Broker ' s own client access point name -- not the name of an individual physical node in Cluster2 -- because the broker, not any single node, is what tracks current VM ownership as virtual machines move between Cluster2 ' s nodes. Specifying an individual node name instead would break replication and failover as soon as a VM ' s ownership moved to a different node in Cluster2.
NEW QUESTION # 290
You have an on-premises Active Directory Domain Services (AD DS) domain that syncs with an Azure Active Directory (Azure AD) tenant.
The AD DS domain contains a domain controller named DC1. DC1 does NOT have internet access.
You need to configure password security for on-premises users. The solution must meet the following requirements:
* Prevent the users from using known weak passwords.
* Prevent the users from using the company name in passwords.
What should you do? To answer, drag the appropriate configurations to the correct targets. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
On DC1: Install the Microsoft Entra Password Protection DC agent. On a member server: Install the Microsoft Entra Password Protection proxy service. In Microsoft Entra ID: Configure Microsoft Entra Password Protection.
Microsoft Entra Password Protection uses a distributed on-premises architecture: the DC agent service runs on every domain controller (including DC1) to evaluate each password change against the banned-password list locally, while a separate proxy service runs on a domain-joined member server -- never on a domain controller itself -- and relays policy download requests from the DC agent out to Microsoft Entra ID over the internet. Because DC1 has no internet access, this design lets DC1 obtain the current banned-password list indirectly through the proxy rather than needing direct outbound connectivity of its own. Both the global banned-password list (covering common weak passwords) and any custom banned terms (such as the company name) are defined and managed centrally in the Microsoft Entra admin center in the cloud, which is why Microsoft Entra Password Protection itself must be configured there. This combination meets both requirements -- blocking known weak passwords and organization-specific terms -- without requiring internet connectivity on the domain controller.
NEW QUESTION # 291
Your network contains an Active Directory Domain Services (AD DS) domain. The domain contains 10 servers that run Windows Server. The servers have static IP addresses. You plan to use DHCP to assign IP addresses to the servers. You need to ensure that each server always receives the same IP address. Which type of identifier should you use to create a DHCP reservation for each server?
Answer: C
Explanation:
A DHCP reservation permanently binds a specific IP address to a specific client so that the client receives the same address on every lease renewal, and Windows Server DHCP identifies the client for this binding by its network adapter ' s MAC (hardware) address, which is the unique Layer 2 identifier included in every DHCPDISCOVER/DHCPREQUEST message. This makes the MAC address the correct and only supported identifier type for a standard client reservation in Windows Server DHCP. A UUID (client identifier option) is used in certain scenarios such as PXE/network boot or specific DHCPv6 configurations (as a DUID), but it is not the mechanism used for ordinary IPv4 reservations on Windows Server DHCP. An FQDN or a NetBIOS name identifies a computer for name resolution purposes (DNS or WINS/NetBIOS) but is not part of the DHCP protocol ' s client identification handshake and cannot be used to key a reservation, since DHCP operates below and independently of the name-resolution layer, at the point where the client does not necessarily have a resolvable name yet. A MAC-address-based reservation is therefore the correct approach.
NEW QUESTION # 292
Your network contains an on-premises Active Directory Domain Services (AD DS) domain. The domain contains a user named User1 and the servers shown in the following table: Server1 (Windows Server 2016), Server2 (Windows Server 2022), Backup1 (Windows Server 2019). User1 is a member of the Protected Users security group. User1 performs the following actions: * From Server1, establishes a remote PowerShell session on Server2 * From the PowerShell session on Server2, attempts to access a resource on Backup1 The request to access the resource on Backup1 is denied. You need to ensure that User1 can access the resources on Backup1 by using the PowerShell session on Server2. The solution must follow the principle of least privilege and minimize administrative effort. What should you configure?
Server OS version table
Answer: A
Explanation:
This is a classic Kerberos double-hop scenario, but with a critical twist: User1 is a member of the Protected Users security group, and Microsoft ' s documentation on the Protected Users group explicitly states that members are unable to " delegate with unconstrained or constrained delegation, " and separately that Credential Delegation (CredSSP) " doesn ' t cache the user ' s plain text credentials even when the user enables the Allow delegating default credentials Group Policy setting. " This means neither unconstrained Kerberos delegation nor CredSSP can be used to solve the double-hop for User1 ' s own credentials -- both are explicitly blocked by Protected Users membership by design, and resource-based constrained delegation relies on the same underlying Kerberos S4U ticket-delegation mechanism for the user ' s identity, which Protected Users membership likewise prevents from being used. The solution that sidesteps the problem entirely, rather than attempting to delegate User1 ' s own (undelegatable) credentials, is to configure a PowerShell session configuration (as used in Just Enough Administration) on Server2 with a fixed RunAs credential: commands run inside that session configuration execute using the RunAs account ' s identity when reaching out to Backup1, rather than using User1 ' s identity for the second hop at all, so no delegation of User1 ' s own protected credentials is ever needed. This also satisfies least privilege and minimal administrative effort, since a single, purpose-built session configuration can be scoped to exactly the actions User1 needs, without provisioning any delegation for User1 individually. Therefore, configuring a PSSessionConfiguration that uses RunAs is the correct solution.
NEW QUESTION # 293
Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com. The domain contains a server named Server1 that has the DFS Namespaces role service installed. Server1 hosts a domain-based Distributed File System (DFS) Namespace named Files. The domain contains a file server named Server2. Server2 contains a shared folder named Share1, which contains a subfolder named Folder1. In the Files namespace, you create a folder named Folder1 that has a target of \\Server2.contoso.
com\Share1\Folder1. You need to configure a logon script that will map drive letter M to Folder1. The solution must use the path of the DFS Namespace. How should you complete the command? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
net use m: \\contoso.com\files\folder1
A domain-based DFS Namespace is accessed using the domain name as the server component of the UNC path, in the form \\ < domain > \ < namespace > \ < folder > , precisely so that clients are insulated from which physical server is actually hosting the namespace or the underlying share; this is the defining benefit of a domain-based namespace over a direct UNC path. Because the requirement explicitly says the solution must use the path of the DFS Namespace, rather than a direct reference to the file server, the command must use
\\contoso.com (the domain name) rather than \\Server1.contoso.com or \\Server2.contoso.com, both of which are specific server names and would bypass the namespace referral entirely. The namespace itself is named Files, and the folder created inside it is Folder1, so the path beneath the domain name must be \files\folder1, not \files\share1\folder1 (which incorrectly includes the underlying share name that DFS abstracts away) and not a bare \folder1 (which omits the namespace name and would not resolve). The complete command is therefore net use m: \\contoso.com\files\folder1, which the DFS Referral service transparently resolves to
\\Server2.contoso.com\Share1\Folder1 behind the scenes.
NEW QUESTION # 294
......
Preparing for the AZ-802 test can be challenging, especially when you are busy with other responsibilities. Candidates who don't use AZ-802 dumps fail in the AZ-802 examination and waste their resources. Using updated and valid AZ-802 questions; can help you develop skills essential to achieve success in the AZ-802 Certification Exam. That's why it's indispensable to use Administering Windows Server (AZ-802) real exam dumps. TorrentExam understands the significance of Updated Microsoft AZ-802 Questions, and we're committed to helping candidates clear tests in one go.
Valid AZ-802 Mock Test: https://www.torrentexam.com/AZ-802-exam-latest-torrent.html