Best 300-425 Vce | 300-425 Hot Questions

P.S. Free 2026 Cisco 300-425 dumps are available on Google Drive shared by Real4exams: https://drive.google.com/open?id=1RTAAJ6z1RDQhWkNPedTnFG8gULRFf8Lk

You only need 20-30 hours to learn our 300-425 test braindumps and then you can attend the exam and you have a very high possibility to pass the 300-425 exam. For many people whether they are the in-service staff or the students they are busy in their job, family lives and other things. But you buy our 300-425 prep torrent you can mainly spend your time energy and time on your job, the learning or family lives and spare little time every day to learn our Designing Cisco Enterprise Wireless Networks exam torrent. And you will pass the 300-425 exam as it is a piece of cake to you with our 300-425 exam questions.

Cisco 300-425 Exam Syllabus Topics:

SectionWeightObjectives
Mobility25%- Design mobility groups based on roles
- Validate mobility tunneling
  • 1. Data path
  • 2. Control path
- Optimize client roaming
Wireless Site Survey25%- Perform and analyze Layer 1 site survey
- Perform pre-deployment site survey
- Describe material attenuation and wireless impact
- Perform post-deployment site survey
- Perform predictive site survey
- Utilize planning and analysis tools
  • 1. AirMagnet
  • 2. Chanalyzer
  • 3. Ekahau
  • 4. Spectrum Analyzer
  • 5. Prime Infrastructure
- Collect design requirements and evaluate constraints
  • 1. Deployment type
  • 2. Client density
  • 3. Access point type
  • 4. Security
  • 5. Real-time applications
Wired and Wireless Infrastructure30%- Determine physical infrastructure requirements
  • 1. Mounting
  • 2. Access point power
  • 3. Switch port capacity
  • 4. Cabling
  • 5. Grounding
- Apply wireless network design requirements
  • 1. Location services
  • 2. Voice and video
  • 3. Hyperlocation
  • 4. Data
- Design radio management
  • 1. RxSOP
  • 2. RRM
  • 3. RF profiles
- Design high-density wireless networks
  • 1. Campus
  • 2. Lecture halls
  • 3. Conference rooms
- Determine logical infrastructure requirements
  • 1. WLC licensing
  • 2. Wireless architecture selection
- Design wireless bridging
  • 1. Workgroup bridge and roaming
  • 2. Modes of operation
  • 3. Ethernet bridging
WLAN High Availability20%- Design high availability for controllers
  • 1. Link Aggregation Group
  • 2. Anchor controller redundancy
  • 3. Stateful Switchover
- Design high availability for access points
  • 1. Fallback configuration
  • 2. Access point prioritization

>> Best 300-425 Vce <<

300-425 Hot Questions | 300-425 Test Study Guide

The Real4exams Designing Cisco Enterprise Wireless Networks (300-425) exam dumps are ready for quick download. Just choose the right 300-425 exam questions format and download it after paying an affordable Designing Cisco Enterprise Wireless Networks in 300-425 Practice Questions charge and start this journey. Best of luck in the Cisco 300-425 exam and career!!!

Cisco Designing Cisco Enterprise Wireless Networks Sample Questions (Q251-Q256):

NEW QUESTION # 251
A customer has multiple WLCs running N+1 redundancy with APs equally distributed. Only one WLC is a designated backup for all other WLCs so the customer must ensure that the most critical APs remain registered or get priority over other APs in case of a WLC failure. However, the customer notices on WLC failure that some critical APs remain unregistered What needs to be addressed in the design?

Answer: B

Explanation:
In a scenario where a customer has multiple Wireless LAN Controllers (WLCs) running N+1 redundancy with Access Points (APs) equally distributed, the critical APs must have priority in case of a WLC failure. If critical APs remain unregistered during a WLC failure, it indicates that the AP failover priority is not enabled globally on the backup WLC. Enabling AP failover priority ensures that critical APs are given precedence over other APs, allowing them to register with the backup WLC first.


NEW QUESTION # 252
An engineer is working for an enterprise and deployed a Cisco 9800 Series Wireless Controller. The wireless infrastructure serves the employees and guest users across the company. The engineer must configure the controller to alleviate the sticky client issue in the deployment. Which action resolves the issue?

Answer: A

Explanation:
The sticky client issue occurs when a wireless client device clings to a suboptimal access point instead of roaming to a better one with a stronger signal. Enabling Optimize Roaming on the Cisco 9800 Series Wireless Controller can alleviate this issue. This feature prompts clients to roam by disassociating them when their signal strength drops below a threshold, encouraging them to seek a better connection.


NEW QUESTION # 253
A customer has two Cisco 550B WLCs that manage all the access points in their network and provide N+1 redundancy and load balancing. The primary Cisco WLC has 60 licenses and the secondary Cisco WLC has 40. The customer wants to convert the N+1 model to an HA model and provide SSO. Configuration must be performed during a maintenance window.
After performing all the configurations on both controllers, the config redundancy unit secondary command is issued on the secondary Cisco WLC and it fails.
Which parameter needs to be in place to complete the configuration?

Answer: B

Explanation:
If you want to convert any existing WLC as a Standby WLC, do so using the config redundancy unit secondary command in the CLI. This CLI command will only work if the WLC which is intended to work as Standby has some number of permanent license count. This condition is only valid for the 5508 WLC, where a minimum of 50 AP Permanent licenses are needed to be converted to Standby. There is no restriction for other WLCs such as the 5520, WiSM2, 7500, and 8500.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-7/High_Availability_DG.html


NEW QUESTION # 254
Refer to the exhibit. An engineer is about to establish a mobility peer connection between a Cisco Catalyst 9800-CL version 16.10.1e and Cisco AireOS 5520 version 8.8.120.0. The data path between the 9800-CL and AireOS 5520 is down, but its control path is up. Based on the configuration, what is the cause of the issue?

Answer: C


NEW QUESTION # 255
A customer has two Cisco wireless controllers named WLC-A and WLC-B. Each controller is in a different building on a campus. The WLCs have different Layer 3 interfaces and broadcast the same SSIDs from their respective APs. Users must remain connected to the same VLAN and maintain their IP addresses during roaming from the APs that are attached to WLC-A and WLC B.
Which action accomplishes the requirement?

Answer: D

Explanation:
To maintain the same VLAN and IP address for users roaming between APs attached to different WLCs, a mobility group should be created between WLC-A and WLC-B. This allows for inter- controller roaming, where client sessions are maintained across different controllers, ensuring that users can move across the campus without losing connectivity or changing IP addresses.


NEW QUESTION # 256
......

Actual and updated 300-425 questions are essential for individuals who want to clear the 300-425 examination in a short time. At Real4exams, we understand that the learning style of every 300-425 exam applicant is different. That's why we offer three formats of Cisco 300-425 Dumps. With our actual and updated 300-425 questions, you can achieve success in the Cisco Certification Exam and accelerate your career on the first attempt.

300-425 Hot Questions: https://www.real4exams.com/300-425_braindumps.html

BTW, DOWNLOAD part of Real4exams 300-425 dumps from Cloud Storage: https://drive.google.com/open?id=1RTAAJ6z1RDQhWkNPedTnFG8gULRFf8Lk