2026 Latest Lead2PassExam JN0-364 PDF Dumps and JN0-364 Exam Engine Free Share: https://drive.google.com/open?id=1mkrpgU1GEHN-QUlv47VrfbJhxJP8HVp2
You can also be part of successful JN0-364 exam candidates. To do this you just need to enroll in JN0-364 exam and strive hard to get success in the Juniper JN0-364 certification exam. In this journey, the JN0-364 Dumps can help you perfectly. The Service Provider Routing and Switching, Specialist (JNCIS-SP) JN0-364 Exam Questions are the real, updated Service Provider Routing and Switching, Specialist (JNCIS-SP) JN0-364 exam practice Test that will assist you in Juniper JN0-364 exam preparation and enable you to pass the final Juniper JN0-364 exam easily.
| Section | Weight | Objectives |
|---|---|---|
| High Availability | 5-8% | - NSR and GRES concepts - Graceful restart - Nonstop active routing |
| Intermediate System to Intermediate System (IS-IS) | 10-15% | - Metrics and wide metrics - Adjacencies and levels - Configuration and monitoring - PDUs and TLVs |
| Tunnels | 5-8% | - GRE and IP-IP tunnels - Tunnel configuration and usage |
| Spanning Tree Protocols | 8-12% | - Configuration and convergence - STP, RSTP, MSTP, VSTP - BPDU and protection features - Port roles and states |
| Multiprotocol Label Switching (MPLS) | 12-18% | - Terminology and forwarding - Configuration and monitoring - Labels and LIB - Segment routing basics - LDP and RSVP |
| Protocol-Independent Routing | 10-15% | - Filter-based forwarding - Load balancing - Routing instances and RIB groups - Static, aggregate, and generated routes - Martian addresses |
| Border Gateway Protocol (BGP) | 20-25% | - Policy and route filtering - Basic operation and message types - Path selection and attributes - Configuration and troubleshooting - IBGP and EBGP |
| IPv6 | 8-12% | - Autoconfiguration - Static and dynamic routing - Address types and format - OSPFv3 and BGP for IPv6 |
| Layer 2 Bridging and VLANs | 8-12% | - VLANs and trunking - Service provider switching features - Bridging concepts |
| Open Shortest Path First (OSPF) | 15-20% | - Link-state database - Areas and router types - LSA types and operation - Configuration and troubleshooting |
>> JN0-364 Reliable Braindumps Pdf <<
Do you want to succeed? Do you want to stand out? Come to choose our products. We are trying our best to offer excellent JN0-364 practice test materials several years. If you choose our products, you can go through the exams and get a valid certification so that you get a great advantage with our Juniper JN0-364 Practice Test materials. If you apply for a good position, a JNCIS-SP will be useful. If you are willing, our JN0-364 practice test files will bring you to a new step and a better nice future.
NEW QUESTION # 97
You are using EBGP to connect to two upstream peers in the same AS. You want to make one of the links less preferred for traffic entering your network from the peer's AS. Which feature should you use to achieve this goal?
Answer: D
Explanation:
In the world of BGP, controllinginbound traffic(traffic entering your network) is significantly more challenging than controlling outbound traffic because it requires influencing a decision made by an external Autonomous System (AS). According to Juniper Networks documentation, when you have multiple links to the same AS or even different ASes, the BGP path selection process is used by the upstream neighbor to decide which path to take to reach your prefixes.
AS-Path Prependingis the standard technique used to make a path appear less attractive to external peers. By artificially lengthening the AS_PATH attribute on the BGP advertisements sent over a specific link, you exploit the BGP best-path algorithm rule that prefers a shorter AS path. When you prepend your own AS number multiple times to the update sent to the "less preferred" peer, that peer's BGP routers will see a longer path compared to the alternative link and will naturally prefer the shorter, unprepended route.
It is important to distinguish why other options are incorrect for this specific goal:
* Local Preference (Option D):This is a well-known discretionary attribute used to influenceoutbound traffic. It is not advertised to EBGP peers; therefore, your upstream neighbor cannot see your local preference settings.
* Origin Code (Option B):While the origin code (IGP, EGP, or Incomplete) is a tie-breaker in the selection process, it is rarely used for traffic engineering and lacks the granular control provided by prepending.
* Route Reflector (Option A):This is an Internal BGP (IBGP) scaling mechanism used to reduce the need for a full mesh of peers within an AS; it does not directly influence external path selection by an upstream provider.
Junos OS allows you to easily implement prepending viarouting policiesapplied as an "export" policy to the EBGP neighbor. By using the as-path-prepend action within a policy term, you can selectively degrade a path's attractiveness to manage your inbound bandwidth.
NEW QUESTION # 98
What information is determined by using the AS path attribute included in the BGP update message? (Choose two.)
Answer: A,D
Explanation:
The AS path attribute lists the autonomous systems that a route advertisement has traversed.
Routers use this attribute to detect routing loops by checking if their own AS number appears in the path.
The AS path length is also used in the BGP best-path selection process, where routes with shorter AS paths are preferred because they represent fewer AS hops to reach the destination prefix.
NEW QUESTION # 99
Click the Exhibit button.
In the exhibit, Site A is sending traffic to Site B. R1 adds MPLS label 7166 to direct the traffic to R5.
Which two criteria did R1 use to determine which label number to add to the traffic? (Choose two.)
Answer: B,D
Explanation:
R1 selects the label based on the packet's destination prefix (the FEC) and then uses the label that its next-hop LSR (R2) advertised for that FEC. In MPLS, each hop forwards using the downstream-assigned label learned from the immediate neighbor, not a label learned directly from the egress router.
NEW QUESTION # 100
You want to enable a routing platform with redundant REs to switch from a primary RE to a backup RE without alerting peer nodes. Which two technologies would you use to satisfy this requirement? (Choose two.)
Answer: B,C
Explanation:
Graceful Routing Engine Switchover (GRES) and Nonstop Active Routing (NSR) are two features used in Junos OS to provide high availability. GRES allows for the stateful failover of the Routing Engine, and NSR allows for the continuation of packet forwarding and protocol states during a Routing Engine switchover. These technologies ensure that peer nodes are not alerted during a switchover. VRRP and ISSU serve different purposes and do not apply to this specific requirement.
NEW QUESTION # 101
Which IPv6 extension header is used to specify intermediate nodes for a packet's path?
Answer: C
Explanation:
The IPv6 Routing extension header is used to specify intermediate nodes that a packet must traverse before reaching its final destination. It allows the sender to define a list of routers that the packet should pass through, enabling source routing functionality in IPv6.
NEW QUESTION # 102
......
The price for JN0-364 exam torrent is reasonable, and no matter you are a student at school or an employee in the company, you can afford the expense. Whatโs more, JN0-364 exam braindumps are high quality, and they can help you pass the exam just one time. We also pass guarantee and money back guarantee, and if you fail to pass the exam, we will give you refund. You can receive the download link and password for JN0-364 Training Materials within ten minutes, so that you can start your learning as quickly as possible. We provide you with free demo for one year, and our system will send the update version for JN0-364 training materials to you automatically.
Top JN0-364 Exam Dumps: https://www.lead2passexam.com/Juniper/valid-JN0-364-exam-dumps.html
BONUS!!! Download part of Lead2PassExam JN0-364 dumps for free: https://drive.google.com/open?id=1mkrpgU1GEHN-QUlv47VrfbJhxJP8HVp2