Autodesk인증사에서 주췌하는 BIM_MGT_101시험은 IT업계에 종사하는 분이시라면 모두 패스하여 자격증을 취득하고 싶으리라 믿습니다. KoreaDumps에서는 여러분이 IT인증자격증을 편하게 취득할수 있게 도와드리는 IT자격증시험대비시험자료를 제공해드리는 전문 사이트입니다. KoreaDumps덤프로 자격증취득의 꿈을 이루세요.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Corporate standards and documentation | 16% | - Document best practices at the corporate level
|
| Topic 2: Data management | 20% | - Conduct project closeout
|
| Topic 3: Project needs assessment | 28% | - Initialize project setup
|
| Topic 4: Collaboration process | 36% | - Review consultant and subcontractor BIM deliverables
|
Autodesk인증 BIM_MGT_101시험을 등록하였는데 시험준비를 어떻게 해애 될지 몰라 고민중이시라면 이 글을 보고KoreaDumps를 찾아주세요. KoreaDumps의Autodesk인증 BIM_MGT_101덤프샘플을 체험해보시면 시험에 대한 두려움이 사라질것입니다. KoreaDumps의Autodesk인증 BIM_MGT_101덤프는Autodesk인증 BIM_MGT_101실제시험문제를 마스터한 기초에서 제작한 최신시험에 대비한 공부자료로서 시험패스율이 100%입니다. 하루 빨리 덤프를 마련하여 시험을 준비하시면 자격증 취득이 빨라집니다.
질문 # 43
A BIM manager is running clash detection for the first time on a large retail project during the Design Development phase. After copying all the models to the coordination space on Autodesk Forma, the matrix shows no clashes among any of the models.
How should the BIM manager proceed?
정답：B
설명：
A complete absence of clashes on a large multidisciplinary retail project is more likely to indicate an input or positioning problem than perfect coordination. The BIM manager should first confirm that every published model uses the approved shared-coordinate system and appears in the correct horizontal position, elevation, and orientation. Models exported using unrelated internal or project coordinates may be separated by a substantial distance in the coordination space, preventing the clash engine from detecting intersections.
After correcting the source models, the teams should republish the designated coordination views and verify visually that the architectural, structural, and building-services models overlay correctly before rerunning clash detection. Publication status, model versions, included geometry, and coordination-space assignments should also be checked.
Adding sheets does not affect three-dimensional clash detection because sheets are documentation containers rather than coordinated model geometry. Proceeding on the assumption that zero results means zero issues would bypass essential input validation. A case study would be inappropriate until the unexpected result has been investigated and confirmed.
The governing principle is that clash results are only reliable when the model inputs, coordinate systems, publication settings, and federation are validated first.
Reference topics: Shared coordinates; model publication; coordination-space validation; clash-detection inputs; federated-model positioning; quality assurance.
질문 # 44
A Revit model in Autodesk Forma that does not have any consultant links is opening for all team members except one. The project BIM manager has already audited and compacted the model.
What should the BIM manager do so that the team member can open the model?
정답：A
설명：
Because the same model opens successfully for every other team member, the central or cloud-hosted model is unlikely to be the primary cause. The failure is isolated to one workstation or user profile. After the model itself has already been audited and compacted, the most appropriate next action is to clear that user's local collaboration cache and allow Revit to rebuild the locally stored model data during the next connection attempt.
Cloud-workshared Revit models rely on locally cached information to reduce transfer time and support synchronization. A damaged, incomplete, or obsolete cache can prevent one user from opening a model even though the authoritative cloud version remains healthy. Re-creating the local cache is therefore a targeted and proportionate troubleshooting step.
A hardware upgrade is not justified without evidence of insufficient memory, storage, graphics capability, or processor resources. Rolling the model back would affect the entire team and could discard valid work despite the model opening normally for other users. Republishing the model also fails to address a user-specific local condition and may unnecessarily alter the project's delivery state.
Reference topics: Revit cloud-worksharing troubleshooting; collaboration cache management; user-specific model access; audit and compact; fault isolation; Autodesk cloud-model workflows.
질문 # 45
Refer to the exhibit.
A designer cannot see a 2x4 tile ceiling in the hallway area of their Reflected Ceiling Plan, but that same ceiling is visible in a 3D view. The 2x2 ceilings in the other rooms are visible in both views.
What are two possible reasons for this? (Select two.)
정답：A,E
설명：
A view filter can be configured to act only on ceilings meeting specific criteria, such as family name, type name, material, height, or another parameter. Because the missing ceiling is a 2x4 type while the visible ceilings are 2x2 types, a filter targeting the 2x4 ceiling could hide it or override its graphics without affecting the other ceilings.
A Plan Region can also impose a localized View Range that differs from the parent Reflected Ceiling Plan. If the hallway contains a Plan Region with a higher cut plane or an otherwise incompatible view range, the ceiling can fall outside the region's visible range even though it remains present and visible in a 3D view.
The ceiling was not deleted because it is still visible in 3D. Turning off the Ceilings category through a View Template would ordinarily hide all ceilings governed by that category in the view, contradicting the fact that the 2x2 ceilings remain visible. Similarly, Hide in View by Category affects the entire Ceilings category within that view rather than one ceiling type or a single hallway element.
Reference topics: Reflected Ceiling Plans; View Range; Plan Regions; view filters; category visibility; view-template troubleshooting.
질문 # 46
The BIM manager is working on a mixed-use project in which consultants are on different platforms and delivery timelines. The client requires COBie-compliant data handover and weekly coordination uploads.
What is the best approach to ensure project-specific BIM processes are effectively implemented from the outset?
정답：C
설명：
A project-specific BIM kickoff is required to convert the BEP and client information requirements into operating procedures understood by every contributor. The session should align teams on weekly publication deadlines, approved file formats, model naming, coordinate standards, coordination responsibilities, issue workflows, COBie parameter requirements, validation gates, and final handover expectations.
This is particularly important where consultants use different platforms. The team must agree on interoperability methods, exchange formats, responsibility for data loss during conversion, and the authoritative location for approved information. The kickoff also provides an opportunity to identify training, software, access, and resource gaps before they affect production.
Accepting each firm's standard workflow would preserve incompatible practices rather than establish a unified project process. Configuring permissions is necessary, but a Common Data Environment cannot compensate for undefined workflows or inconsistent deliverables. Waiting to modify a baseline BEP only after coordination problems occur is reactive and allows preventable errors to enter the project.
The kickoff should conclude with confirmed responsibilities, documented decisions, action owners, and controlled updates to the BEP and delivery plans.
Reference topics: BIM kickoff; multidisciplinary alignment; COBie; interoperability planning; coordination uploads; project-specific workflows; BIM Execution Plan implementation.
질문 # 47
The BIM manager received a subcontractor's 3D model containing specialty equipment to be integrated into the federated model. Upon review, they observe that:
Many elements lack consistent object styles and category assignments.
Some components are modelled with excessive detail, affecting performance.
Embedded data does not follow the project's naming conventions outlined in the BEP.
What is the most appropriate next step when evaluating this geometry and content?
정답：D
설명：
The BIM manager should perform a formal compliance review against the BIM Execution Plan, model-content standard, information requirements, and applicable element or classification matrix. Each nonconforming condition should be documented clearly, including incorrect category assignments, inconsistent object styles, excessive geometric detail, missing parameters, invalid naming, and unsuitable data structures.
The subcontractor should then receive a controlled revision request identifying the required corrections and resubmission criteria. Geometry should be simplified to the level needed for coordination and downstream use, but required metadata, classifications, connection points, clearances, and asset information must be retained. Optimization and information compliance are parallel requirements, not competing alternatives.
Approving the model unchanged would introduce performance and data-quality defects into the federation and could cause unreliable clash results, scheduling errors, or handover deficiencies. Hiding excessive detail with view filters changes only its visibility; the underlying geometry and data remain noncompliant and continue to affect model processing. Instructing the subcontractor to reduce file size regardless of information loss also fails the project's deliverable requirements.
Acceptance should occur only after the revised model passes the defined quality-control checks.
Reference topics: Content standards; subcontractor deliverables; model acceptance criteria; geometry optimization; classification and metadata; BEP compliance; quality-control reporting.
질문 # 48
......
KoreaDumps는Autodesk인증BIM_MGT_101시험에 대하여 가이드를 해줄 수 있는 사이트입니다. KoreaDumps는 여러분의 전업지식을 업그레이드시켜줄 수 잇고 또한 한번에Autodesk인증BIM_MGT_101시험을 패스하도록 도와주는 사이트입니다. KoreaDumps제공하는 자료들은 모두 it업계전문가들이 자신의 지식과 끈임없은 경헌등으로 만들어낸 퍼펙트 자료들입니다. 품질은 정확도 모두 보장되는 문제집입니다.Autodesk인증BIM_MGT_101시험은 여러분이 it지식을 한층 업할수 잇는 시험이며 우리 또한 일년무료 업데이트서비스를 제공합니다.
BIM_MGT_101최신 인증시험정보: https://www.koreadumps.com/BIM_MGT_101_exam-braindumps.html