DOWNLOAD the newest PassLeaderVCE JN0-352 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=12YBd-O6me-xiL5SBVFtXPKnF2zbU22Y2
It is of no exaggeration to say that sometimes JN0-352 certification is exactly a stepping-stone to success, especially when you are hunting for a job. The JN0-352 study materials are of great help in this sense. With the JN0-352 test training, you can both have the confidence and gumption to ask for better treatment. To earn such a material, you can spend some time to study our JN0-352 study torrent. No study can be done successfully without a specific goal and a powerful drive, and here to earn a better living by getting promotion is a good one.
| Section | Objectives |
|---|---|
| Spanning Tree | - Convergence and reconvergence - Bridge Protocol Data Units (BPDUs) - STP and RSTP concepts, roles and states |
| Tunnels | - IP tunneling concepts - GRE and IP-IP configuration and troubleshooting |
| Layer 2 Security | - BPDU, loop and root protection - MACsec and storm control - Port security (MAC limiting, DHCP snooping, DAI, IP source guard) - Layer 2 firewall filters |
| High Availability | - Virtual chassis and graceful restart - VRRP, NSR, NSB and BFD - Link Aggregation Groups and RTG |
| IS-IS | - Levels, areas and metrics - Adjacencies and troubleshooting - Link-state database and PDUs |
| OSPF | - Router ID, adjacencies and neighbors - Areas and LSA types - Link-state database and packet types |
| BGP | - Attributes and path selection - BGP basic operations and message types - EBGP and IBGP peer interactions |
| Layer 2 Switching and VLANs | - Inter-VLAN routing - Ports and VLAN tagging - Native VLANs and voice VLANs - Frame processing - Bridging components |
| Protocol-Independent Routing | - Load balancing and filter-based forwarding - Martian addresses and RIB groups - Static, aggregate, generated routes |
PassLeaderVCE offers authentic and actual JN0-352 dumps that every candidate can rely on for good preparation. Our top priority is to give you the most reliable prep material that helps you pass the JN0-352 Exam on the first attempt. In addition, we offer up to three months of free Enterprise Routing and Switching, Specialist (JNCIS-ENT) questions updates.
NEW QUESTION # 33
How many bytes of overhead does an IP-IP tunnel add to a packet?
Answer: C
NEW QUESTION # 34
You enable persistent MAC learning on your Juniper switch. In this scenario, which statement is correct?
Answer: A
NEW QUESTION # 35
You implemented the MAC address limit feature with the shutdown action on all interfaces on your switch.
In this scenario, which statement is correct when a violation occurs?
Answer: D
Explanation:
When the MAC address limit feature with the shutdown action is implemented on a switch, if a violation occurs, the interface is disabled and a system log entry is generated. If the switch has been configured with the port-error-disable statement, the disabled interface recovers automatically upon expiration of the specified disable timeout. However, if the switch has not been configured for auto-recovery from port error disabled conditions, you must manually clear the violation by running the clear ethernet-switching port-error command for the interface to send and receive traffic again. This explanation is based on the Enterprise Routing and Switching Specialist (JNCIS-ENT) documents and learning resources available at Juniper Networks.
NEW QUESTION # 36 
Click the Exhibit button.
Referring to the exhibit, all possible firewall filters are configured along the path from Server A to Server B.
In which order will Switch 1 process transmit (Tx) and receive (Rx) firewall filters?
Answer: D
Explanation:
Because Server A resides in VLAN 10 and Server B resides in VLAN 20, traffic between them cannot remain a purely Layer 2 switched flow; it must be routed between the two VLANs, which on Switch 1 means the packet traverses the switch's internal routing engine (via an IRB interface) between the ingress and egress switching stages. Junos processes firewall filters along this path in a strict, layered order that mirrors the packet's actual journey through the device. First, any filter applied at the physical ingress port level (Rx-Port) is evaluated as the frame first arrives on ge-0/0/10. Next, any filter applied to the ingress VLAN (Rx-VLAN, i.
e., VLAN 10) is evaluated as the frame is classified into its source broadcast domain. Because the destination subnet requires routing, the packet is then handed to the routing engine, where any input/ingress routed filter (Rx-Router) applied to the receiving IRB interface is evaluated next, followed by any output/egress routed filter (Tx-Router) applied as the now-routed packet is handed from the routing engine back out toward VLAN
20. Finally, the packet passes through any egress VLAN filter (Tx-VLAN, for VLAN 20) and then the egress physical port filter (Tx-Port) on ge-0/0/20 immediately before transmission to Server B. This complete six- stage sequence - Rx-Port, Rx-VLAN, Rx-Router, Tx-Router, Tx-VLAN, Tx-Port - reflects every filter- evaluation checkpoint a routed, inter-VLAN packet passes through on an EX Series Layer 3 switch.
Reference topics: Junos Enterprise Switching - Layer 2 Switching and Firewall Filter Processing Order for Routed VLAN Traffic.
NEW QUESTION # 37 
Click the Exhibit button.
You configure the aggregate route 172.16.0.0/16 on router R1. The routing table currently contains active routes for 172.16.10.0/24 and 172.16.99.0/24. No other more-specific routes exist.
Referring to the exhibit, which statement describes what R1 would do with traffic destined to 172.16.200.5?
Answer: A
Explanation:
The destination address 172.16.200.5 falls within the 172.16.0.0/16 aggregate's summarized range but does not fall within either of the two active, more-specific contributing routes actually present in the table -
172.16.10.0/24 and 172.16.99.0/24 - meaning no route more specific than the /16 itself exists to cover it.
Under Junos's longest-match forwarding logic, the lookup for 172.16.200.5 therefore resolves to the aggregate route itself, and since aggregate routes are installed by default with a reject next hop rather than any real forwarding path, the router drops the packet and simultaneously generates an ICMP destination-unreachable message back to the originating source, explicitly signaling that no valid path exists for that specific destination even though a covering summary is being advertised. This reject behavior is precisely why aggregate routes are valuable for reducing the number of routes advertised upstream while still providing clear, immediate feedback for traffic aimed at address space within the summary that has no genuine underlying route, rather than silently black-holing it or misdirecting it toward an unrelated contributing route's next hop. The aggregate route itself remains active and installed throughout this process - a gap in contributing coverage does not deactivate the aggregate, since the aggregate's activation depends only on at least one contributing route being active, which is satisfied here by both existing /24 blocks. There is also no default route present in this scenario to fall back upon. Reference topics: Junos Enterprise Routing - Protocol Independent Routing, Aggregate Route Reject Behavior for Uncovered Address Space.
NEW QUESTION # 38
......
Do you want to pass JN0-352 certification exam easily? Then it is necessary to have PassLeaderVCE JN0-352 exam certification training materials. PassLeaderVCE JN0-352 test training materials are summarized by IT experts with constant practice, which is the combination of JN0-352 Exam Dumps and answers, and can't be matched by any JN0-352 test training materials from others. PassLeaderVCE will take you to a more beautiful future.
Reliable JN0-352 Test Practice: https://www.passleadervce.com/JNCIS-ENT/reliable-JN0-352-exam-learning-guide.html
P.S. Free 2026 Juniper JN0-352 dumps are available on Google Drive shared by PassLeaderVCE: https://drive.google.com/open?id=12YBd-O6me-xiL5SBVFtXPKnF2zbU22Y2